jimmy patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stynchrr · 12-04-2006, 03:22 PM

I got a lot of rust on the panel that the front seat belt lower blot mounts to. The mount is no longer attached. Is there any panels that are made for this area? Also does any one have pictures inside and out of thes area for rererence when i begin to reconstruct this area.
Thanks
Tim

edman87 · 12-04-2006, 03:55 PM

i got 1 with no carpet or seats and 1 wit totally gutted interior, I will try to get you a couple pics.

stynchrr · 12-04-2006, 04:16 PM

That would be great thanks

edman87 · 12-04-2006, 07:00 PM

Does this help? This is my 87, the 89 has some stuff piled in front of that area

edman87 · 12-04-2006, 07:03 PM

That is exactly how it looked when I pulled the trim panels.

stynchrr · 12-05-2006, 11:39 AM

Thanks thats what i need would you be able to take pics of the under side looking at that area? There is the piece that is spot welded to the middle of the piece in the pictures that I am not sure how where it attaches.
Thanks

edman87 · 12-05-2006, 07:57 PM

Not a problem. Do you mean from under the blazer or from the rear facing forward?

wildmanaaron · 12-05-2006, 11:30 PM

Quote:

Originally Posted by edman87

That is exactly how it looked when I pulled the trim panels.

I wish my floorboards in that area were that good. I need the rear part of the floorboards for both sides and part of the bedsides that the lower seatbelts bolt to as well. And rockers, lower bedside patches, etc. The only good thing about my Blazer is the fact that the bed floor was in good shape, the inner fenders aren't rusted through....

stynchrr · 12-06-2006, 09:07 AM

under the blazer if you could

edman87 · 12-06-2006, 10:39 AM

stynchrr- will try to get them today
wildmanaaron- too bad you are not closer, I have a spare tub with no rust!

edman87 · 12-06-2006, 11:20 PM

Try this- the first 2 are straight up from ground, secon 2 are tire forward, last 2 inside. Hope these help

stynchrr · 12-07-2006, 03:28 PM

That is perfect. I got a lot of fab work to do. Thanks for helping me out.

edman87 · 12-07-2006, 08:37 PM

No problem. Good luck with the fabbing.

Mello Mel · 12-08-2006, 09:18 PM

WOW - that was really cool you went through all that trouble to get those pictures. thats why i love this site because of peple like you. that was really kool .

edman87 · 12-08-2006, 11:41 PM

It gives me an excuse to take more pics of my vehicles and shop while I am in there!
I have asked for some pics before, and someone helped me out, so i figure i can at least pass the favor to someone else.

12-04-2006, 03:22 PM	#1
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	jimmy patch panels I got a lot of rust on the panel that the front seat belt lower blot mounts to. The mount is no longer attached. Is there any panels that are made for this area? Also does any one have pictures inside and out of thes area for rererence when i begin to reconstruct this area. Thanks Tim

12-04-2006, 03:55 PM	#2
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels i got 1 with no carpet or seats and 1 wit totally gutted interior, I will try to get you a couple pics. __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-04-2006, 04:16 PM	#3
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: jimmy patch panels That would be great thanks

12-04-2006, 07:00 PM	#4
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels Does this help? This is my 87, the 89 has some stuff piled in front of that area __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-04-2006, 07:03 PM	#5
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels That is exactly how it looked when I pulled the trim panels. __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-05-2006, 11:39 AM	#6
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: jimmy patch panels Thanks thats what i need would you be able to take pics of the under side looking at that area? There is the piece that is spot welded to the middle of the piece in the pictures that I am not sure how where it attaches. Thanks

12-05-2006, 07:57 PM	#7
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels Not a problem. Do you mean from under the blazer or from the rear facing forward? __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-06-2006, 09:07 AM	#9
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: jimmy patch panels under the blazer if you could

12-06-2006, 10:39 AM	#10
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels stynchrr- will try to get them today wildmanaaron- too bad you are not closer, I have a spare tub with no rust! __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-06-2006, 11:20 PM	#11
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels Try this- the first 2 are straight up from ground, secon 2 are tire forward, last 2 inside. Hope these help __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-07-2006, 03:28 PM	#12
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: jimmy patch panels That is perfect. I got a lot of fab work to do. Thanks for helping me out.

12-07-2006, 08:37 PM	#13
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels No problem. Good luck with the fabbing. __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

12-08-2006, 09:18 PM	#14
Mello Mel African-American Shaolin Monk Join Date: Aug 2006 Location: Maricopa, AZ Posts: 200	Re: jimmy patch panels WOW - that was really cool you went through all that trouble to get those pictures. thats why i love this site because of peple like you. that was really kool .

12-08-2006, 11:41 PM	#15
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: jimmy patch panels It gives me an excuse to take more pics of my vehicles and shop while I am in there! I have asked for some pics before, and someone helped me out, so i figure i can at least pass the favor to someone else. __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.