The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-20-2002, 05:21 PM   #1
WB72
Before and After
 
WB72's Avatar
 
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
Stock Stall Speed

What would the stock stall speed be on a 350 / 350?

I am looking for an advanced torque converter, and the base it on ??? above stock speed.

Any info on Saturday night special from TCI?

__________________
Not Grandpa's C-20 anymore...
383 Stroker 425HP, 485Ft/Lbs
Lowered 3.5" Front / 5" Rear
66,000 miles.
Alberta, CANADA
WB72 is offline   Reply With Quote
Old 08-20-2002, 05:34 PM   #2
bigvinnie
Registered User
 
bigvinnie's Avatar
 
Join Date: Aug 2001
Location: escondido, ca 92026
Posts: 1,222
saturday nite special is about 400 rpm above stock, which is roughly 15-1700 rpm... I ran one before I switched to a 700R4 and was very happy with it....
__________________
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA

72 Stepside Project
bigvinnie is offline   Reply With Quote
Old 08-21-2002, 10:50 AM   #3
WB72
Before and After
 
WB72's Avatar
 
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
So correct me if I'm wrong, stock speed would be 1100 - 1300 rpm?



__________________
Not Grandpa's C-20 anymore...
383 Stroker 425HP, 485Ft/Lbs
Lowered 3.5" Front / 5" Rear
66,000 miles.
Alberta, CANADA
WB72 is offline   Reply With Quote
Old 08-21-2002, 11:11 AM   #4
Frank_Zeller
Registered User
 
Frank_Zeller's Avatar
 
Join Date: Jun 2001
Location: Austin, Texas
Posts: 796
Stock stall 1500 to 1700. This is foot on brake WOT. Also dependent on how much torque you have. Had a TCI Saturday night special and it came in around 2100 with hoped up 305.
__________________
69 SWB C/10 5-6 drop 700R4
69 Firebird Convert 455 4 spd
70 Torino GT Convert

Austin-Texas
Frank_Zeller is offline   Reply With Quote
Old 08-21-2002, 01:30 PM   #5
WB72
Before and After
 
WB72's Avatar
 
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
I'm lost, Why do you need foot on brakes and WOT?

I thought that the stall speed was actually when the fluid transfered and your vehicle starts to move. If you are just above idle, the truck starts to move Aprox 1000 rpm. I just don't understand 1500-1700rpm. Is that when the converter rotates at the same speed?

HELP!
__________________
Not Grandpa's C-20 anymore...
383 Stroker 425HP, 485Ft/Lbs
Lowered 3.5" Front / 5" Rear
66,000 miles.
Alberta, CANADA
WB72 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com