|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-27-2008, 05:34 AM
|
#1 |
|
Registered User
Join Date: Nov 2006
Location: Alabama
Posts: 120
|
inline?? OD trans TV to Offy 4bbl Intake
Guys I've searched but I have been able to find a thread on hooking the TV cable from an OD trans to the Offy set-up on an inline.
My Quadrajet sits sideways on the intake and the linkage movement is now East to West , instead of North to South. I'm using an extra long throttle cable to wrap around the carb, is there an extra long TV cable out there that will work , or a way to use a stock length? Thanks in advance! Zac
__________________
Working on my first 1,000 post. I'm sure I'll get there before this project is over  .
|
|
|
|
02-27-2008, 06:03 AM
|
#2 |
|
Old Duffer
 
Join Date: Mar 2003
Location: Maine
Posts: 1,821
|
Re: inline?? OD trans TV to Offy 4bbl Intake
I'm not sure what the answer is, but try www.stovebolt.com.
There's alot of tech threads there on inliners and various tranny's Good luck
__________________
'68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve." |
|
|
|
|
02-27-2008, 09:41 AM
|
#3 |
|
"Trucks with Class"
 
Join Date: Jul 2000
Location: OLYMPIA, WA, USA
Posts: 8,122
|
Re: inline?? OD trans TV to Offy 4bbl Intake
Lokar is the answer for the long cut-to-length cables.
I spend a lot of time figuring out the gas & trans cables for Offy/Holley & 700R4...and I started out with the solid rod to carb linkage...had to change over to the pedal w/cable 71-2 style. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
