Out with the Old in with the New - The 1947 - Present Chevrolet & GMC Truck Message Board Network

reefer55 · 03-28-2012, 09:33 PM

Sold off my 71 2WD to a good home and now I can pull my 68 SWB off the shelf and continue to work on her. The 68 was from a young guy who wanted to travel after putting a lot of work get get the project started. So I jumped at the opportunity to take over considering the amount of time that was already put into the cab, diff and front end. It was originally a LWB so I took off what I needed and got rid of the remaining parts. More to come!

YBNORML · 03-28-2012, 10:39 PM

It's about time you posted! I have a few pics I took with my Iphone a couple of weeks ago. Sorry about the crappy resolution. I'll email them to you as well.

reefer55 · 03-28-2012, 11:27 PM

YBNORML and I made a trip to BC to bring back two short box frames, one I sent to have cleaned up the other we sold to pay for the trip. Picked up a donor truck, 68 GMC 3/4 tone from Utah with a low millage 396 that ran real nice. Took what I needed and passed the frame and the box to another board member.

reefer55 · 03-28-2012, 11:32 PM

I to bad it took me so long to post my build, I'm rebuilding my shop as it's only 20 X20 and the walls leak the roof will go at any time so I decided to knock it down to build a 24 X 28 with 10' walls an the drive way is at a 6% grade so it's dangerous to do anything there.

03-28-2012, 09:33 PM	#1
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Out with the Old in with the New Sold off my 71 2WD to a good home and now I can pull my 68 SWB off the shelf and continue to work on her. The 68 was from a young guy who wanted to travel after putting a lot of work get get the project started. So I jumped at the opportunity to take over considering the amount of time that was already put into the cab, diff and front end. It was originally a LWB so I took off what I needed and got rid of the remaining parts. More to come! Attached Images

03-28-2012, 10:39 PM	#2
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,847	Re: Out with the Old in with the New It's about time you posted! I have a few pics I took with my Iphone a couple of weeks ago. Sorry about the crappy resolution. I'll email them to you as well. Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

03-28-2012, 11:27 PM	#3
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Out with the Old in with the New YBNORML and I made a trip to BC to bring back two short box frames, one I sent to have cleaned up the other we sold to pay for the trip. Picked up a donor truck, 68 GMC 3/4 tone from Utah with a low millage 396 that ran real nice. Took what I needed and passed the frame and the box to another board member. Attached Images

03-28-2012, 11:32 PM	#4
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Re: Out with the Old in with the New I to bad it took me so long to post my build, I'm rebuilding my shop as it's only 20 X20 and the walls leak the roof will go at any time so I decided to knock it down to build a 24 X 28 with 10' walls an the drive way is at a 6% grade so it's dangerous to do anything there. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.