6 Cylinder Power Steering Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C20-67_N_MO · 02-14-2009, 05:40 PM

Looking for pictures of how you guy have your power steering pump mounted.

I have the pump and all the brackets but not sure how they will all fit.

Specially since I will be running an aftermarket Intake and headers.

Thanks in advance!

68gmsee · 02-14-2009, 06:40 PM

Let me know if you need another angle.

68gmsee · 02-14-2009, 06:43 PM

This thread has some more good pics.

http://67-72chevytrucks.com/vboard/s...d.php?t=299647

C20-67_N_MO · 02-14-2009, 08:30 PM

Good Pics!

Thanks a lot 68gmsee!!

72BlckButy · 02-14-2009, 10:25 PM

Tallcountry... can you list out the parts required for the addition of PS to your 250? I'm throwing around the idea of adding PS to my '69 but am unsure on the parts I would need.

68gmsee · 02-14-2009, 11:56 PM

Quote:

Originally Posted by 72BlckButy

Tallcountry... can you list out the parts required for the addition of PS to your 250? I'm throwing around the idea of adding PS to my '69 but am unsure on the parts I would need.

If you just need a pic of the parts required, check my post above (#3). There's a picture of all the parts needed. Best bet is to try to find a 6 cylinder vehicle in the 70's. I got mine off an El Camino, but have see them in Chevy Novas of that vintage also. Try to find one with a non integrated head.

Livrat · 02-15-2009, 12:08 AM

Here's a couple of pics off of a 72 6...

C20-67_N_MO · 02-15-2009, 12:42 AM

72... will post up Pics of what I have that will give you a good idea what I have to work with since they are not attached to the engine yet.

How's that?

72BlckButy · 02-15-2009, 12:48 AM

That will be awesome! That's what I was looking for, a spread out shot of all the required pieces.

Thanks TC, 68 and Livrat.

**lolife99** · 02-15-2009, 12:58 AM

Nate,... if you look at the P/S "pump" bracket,... you can see the difference in just these two styles, shown here. The best bet would be to buy a complete set up off of the same engine. I'll keep an eye out for a set for your 250 6-cylinder.
I'm also collecting P/S photos on my laptop.

72BlckButy · 02-15-2009, 01:06 AM

Now.... to add to this, has anyone ever seen a motor with a smog setup and powersteering???

Thanks for the info Keith, I will take a look at the pics further and then compare them to TC's pics he's going to post.

C20-67_N_MO · 02-15-2009, 01:19 PM

Okay well this is not really a list of parts but more of a picture of what I have and hope it's enough to get it going.

Notice in the background is the power steering gear box I bought from teeitup.

Got the power steering pump and all brackets for free since I bought a 12-bolt rear end with 5x5 bolt pattern from a salvage yard in Texas.

I hope this helps a little bit. Will take more pictures once I have cleaned and painted all the parts.

There is one more bracket that is not pictured, but like I said will take more once all are assembled.

Livrat · 02-15-2009, 02:08 PM

Your main lower mounting bracket looks to be off of an "intregal head" 250. (although not positive)... the non integral and integral head mounting bracket do not interchange.. here are pic of a complete integral head setup..
I also have a non integral head lower bracket that I will get pictures of later today and post them for you..

Livrat · 02-15-2009, 04:32 PM

here are a couple of pictures of the non intregral head main mounting bracket..

C20-67_N_MO · 02-15-2009, 05:49 PM

Yeah those look totally different from mine.

Looks like I may have the wrong brackets then.

Rats!

72BlckButy · 02-15-2009, 09:10 PM

Thanks for getting the pics TC, and hopefully those brackets will still work out for you.

02-14-2009, 05:40 PM	#1
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	6 Cylinder Power Steering Setup Looking for pictures of how you guy have your power steering pump mounted. I have the pump and all the brackets but not sure how they will all fit. Specially since I will be running an aftermarket Intake and headers. Thanks in advance! __________________ Coming Soon: Project 1970 Country Truck

02-14-2009, 06:40 PM	#2
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: 6 Cylinder Power Steering Setup Let me know if you need another angle. Attached Images

02-14-2009, 08:30 PM	#4
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: 6 Cylinder Power Steering Setup Good Pics! Thanks a lot 68gmsee!! __________________ Coming Soon: Project 1970 Country Truck

02-14-2009, 10:25 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Cylinder Power Steering Setup Tallcountry... can you list out the parts required for the addition of PS to your 250? I'm throwing around the idea of adding PS to my '69 but am unsure on the parts I would need. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-15-2009, 12:08 AM	#7
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 6 Cylinder Power Steering Setup Here's a couple of pics off of a 72 6... Attached Images

02-14-2009, 06:43 PM	#3
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: 6 Cylinder Power Steering Setup This thread has some more good pics. http://67-72chevytrucks.com/vboard/s...d.php?t=299647

02-15-2009, 12:42 AM	#8
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: 6 Cylinder Power Steering Setup 72... will post up Pics of what I have that will give you a good idea what I have to work with since they are not attached to the engine yet. How's that? __________________ Coming Soon: Project 1970 Country Truck

02-15-2009, 12:48 AM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Cylinder Power Steering Setup That will be awesome! That's what I was looking for, a spread out shot of all the required pieces. Thanks TC, 68 and Livrat. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 02-15-2009 at 12:49 AM.

02-15-2009, 12:58 AM	#10
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,686	Re: 6 Cylinder Power Steering Setup Nate,... if you look at the P/S "pump" bracket,... you can see the difference in just these two styles, shown here. The best bet would be to buy a complete set up off of the same engine. I'll keep an eye out for a set for your 250 6-cylinder. I'm also collecting P/S photos on my laptop. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 02-15-2009 at 12:59 AM.

02-15-2009, 01:06 AM	#11
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Cylinder Power Steering Setup Now.... to add to this, has anyone ever seen a motor with a smog setup and powersteering??? Thanks for the info Keith, I will take a look at the pics further and then compare them to TC's pics he's going to post. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

02-15-2009, 01:19 PM	#12
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: 6 Cylinder Power Steering Setup Okay well this is not really a list of parts but more of a picture of what I have and hope it's enough to get it going. Notice in the background is the power steering gear box I bought from teeitup. Got the power steering pump and all brackets for free since I bought a 12-bolt rear end with 5x5 bolt pattern from a salvage yard in Texas. I hope this helps a little bit. Will take more pictures once I have cleaned and painted all the parts. There is one more bracket that is not pictured, but like I said will take more once all are assembled. Attached Images __________________ Coming Soon: Project 1970 Country Truck

02-15-2009, 02:08 PM	#13
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 6 Cylinder Power Steering Setup Your main lower mounting bracket looks to be off of an "intregal head" 250. (although not positive)... the non integral and integral head mounting bracket do not interchange.. here are pic of a complete integral head setup.. I also have a non integral head lower bracket that I will get pictures of later today and post them for you.. Attached Images

02-15-2009, 04:32 PM	#14
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 6 Cylinder Power Steering Setup here are a couple of pictures of the non intregral head main mounting bracket.. Attached Images

02-15-2009, 05:49 PM	#15
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: 6 Cylinder Power Steering Setup Yeah those look totally different from mine. Looks like I may have the wrong brackets then. Rats! __________________ Coming Soon: Project 1970 Country Truck

02-15-2009, 09:10 PM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 6 Cylinder Power Steering Setup Thanks for getting the pics TC, and hopefully those brackets will still work out for you. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.