Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jim_PA · 08-03-2009, 10:27 AM

This really isn't a part-out anymore, as most of it is gone, all I have is what's listed.

Cash or Money Orders (you can paypal, but you'll have to pay the fees...)

Factory auxiliary leafs "G60" (all components) - $65

Factory spare tire bracket (this looks complete to me, and only has a minimal amount of surface rust... it's a modern-day miracle) - $30

Factory??? Jack, crank, lug tool, mounting bracket and spring ( I don't know if it's factory or not, so don't buy unless you know for sure ) - $30

These appear to be factory wheels (no hub caps) - $50 for the set of 4

Manual steering box - $25

Heater Box (looks clean, no cracks, no broken ears, no fan motor, door could use a little lube, but it moves freely) - $35
Complete front suspension (factory sway-bar + brackets, A-Arms, steering linkages, spindles, drums, etc - everything looks good) - $60

All pictures are here http://www.personal.psu.edu/jxu109/truck/parts/ (figured it would be easier for you to click on title names, rather than be flooded with pictures on the screen...)

**michael bustamante** · 08-03-2009, 10:28 AM

do you have the chrome vent windows? also a pic of the jack assy also in need of the window cranks and the bed wiring for the taillights if if in ok shape

Jim_PA · 08-03-2009, 11:01 AM

Quote:

Originally Posted by michael bustamante

do you have the chrome vent windows? also a pic of the jack assy also in need of the window cranks and the bed wiring for the taillights if if in ok shape

Bed wiring for taillights looks clean. I will remove it and post more pics for you. $35 shipped pending condition.

I'll throw the cranks in for an extra $5.

I added more pics of the jack (look for jack.JPG to jack4.jpg) also added pics of the window_crank.JPG and vent_window.JPG

The cranks look to be in fair condition, one is missing a knob (maybe it's floating around inside the cab somewhere...) Vent windows have chrome latches... I guess you are looking for chrome trim all the way around the window?

olblue60@aol.com · 08-03-2009, 11:34 AM

Hi
I'm needing the ignition switch and bezels. Do you have a key? Thanks

John

**michael bustamante** · 08-03-2009, 11:40 AM

no rush at all take your time

Jim_PA · 08-03-2009, 12:03 PM

Quote:

Originally Posted by olblue60@aol.com

Hi
I'm needing the ignition switch and bezels. Do you have a key? Thanks

John

Just added ignition_key.JPG to the pictures link.

$25 shipped???

I'll have to figure out how to remove it too...

olblue60@aol.com · 08-03-2009, 12:15 PM

I'll take it when its taken out. Thanks, lemme know.

Jim_PA · 08-03-2009, 12:37 PM

ok - I'll let you know when it's ready.

Jim_PA · 08-03-2009, 01:55 PM

Quote:

Originally Posted by michael bustamante

do you have the chrome vent windows? also a pic of the jack assy also in need of the window cranks and the bed wiring for the taillights if if in ok shape

One of the plastic connectors that plugs into the back of the metal brake light housing has the 2 little nubs that hold it in worn down or partially broken (It was still snug in the metal housing). Everything else is complete and un-cut.

I have it out and ready to go.

Jim_PA · 08-03-2009, 02:56 PM

Quote:

Originally Posted by olblue60@aol.com

I'll take it when its taken out. Thanks, lemme know.

It's out, here's a pic:

http://www.personal.psu.edu/jxu109/t...on_switch2.JPG

jsmithbm · 08-03-2009, 07:45 PM

Can i get a pic of the jack and stuff? and shippin to 30297 thanks

jsmithbm · 08-03-2009, 07:52 PM

i see the photos now

Jim_PA · 08-03-2009, 09:15 PM

Quote:

Originally Posted by jsmithbm

can i get a pic of the jack and stuff? And shippin to 30297 thanks

$5

dilling · 08-04-2009, 12:18 AM

I like to come look at cab please email numbwe 302 242 3014

olblue60@aol.com · 08-04-2009, 02:16 AM

How would you like to be paid? Please send payment info. Thanks!

John

Jim_PA · 08-04-2009, 04:06 PM

Yes, the cab has a title, I can possibly work with delivery for the price of fuel...

Jim_PA · 08-05-2009, 01:35 PM

Reasonable offers accepted!

Jim_PA · 08-06-2009, 07:39 AM

Ignition key and switch SOLD! Thanks Old Blue, you'll have it in a day or so.

Jim_PA · 08-06-2009, 04:59 PM

The whole cab will be sent to chevy heaven Saturday. Speak up if you want anything out of a 67 cab

Jim_PA · 08-06-2009, 08:59 PM

I will probably be at Carlisle on Saturday if anyone wants me to bring stuff with me. Someone's gotta want a 292!!!

msgross · 08-06-2009, 09:22 PM

I think Special-K might have been looking for a 292...

I'll PM my number, we'll be at Carlisle..

Jim_PA · 08-06-2009, 11:15 PM

Quote:

Originally Posted by msgross

I think Special-K might have been looking for a 292...

I'll PM my number, we'll be at Carlisle..

OK -- I'll call you or stop by Saturday (if I go... sometimes my sidekick loses interest in things quickly.). If you hear anything from him about it, let me know.

Jim_PA · 08-09-2009, 11:12 PM

Liquidation sale... Prices updated.

mup123 · 08-14-2009, 09:17 PM

Do you still have the rad support and if so is it in good shape and how much do you want for it

Jim_PA · 08-15-2009, 12:46 AM

Quote:

Originally Posted by mup123

Do you still have the rad support and if so is it in good shape and how much do you want for it

No, it's trash. Sorry.

08-03-2009, 10:27 AM	#1
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA This really isn't a part-out anymore, as most of it is gone, all I have is what's listed. Cash or Money Orders (you can paypal, but you'll have to pay the fees...) Factory auxiliary leafs "G60" (all components) - $65 Factory spare tire bracket (this looks complete to me, and only has a minimal amount of surface rust... it's a modern-day miracle) - $30 Factory??? Jack, crank, lug tool, mounting bracket and spring ( I don't know if it's factory or not, so don't buy unless you know for sure ) - $30 These appear to be factory wheels (no hub caps) - $50 for the set of 4 Manual steering box - $25 Heater Box (looks clean, no cracks, no broken ears, no fan motor, door could use a little lube, but it moves freely) - $35 Complete front suspension (factory sway-bar + brackets, A-Arms, steering linkages, spindles, drums, etc - everything looks good) - $60 All pictures are here http://www.personal.psu.edu/jxu109/truck/parts/ (figured it would be easier for you to click on title names, rather than be flooded with pictures on the screen...) Last edited by Jim_PA; 08-16-2009 at 11:58 AM.

08-03-2009, 10:28 AM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,844	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA do you have the chrome vent windows? also a pic of the jack assy also in need of the window cranks and the bed wiring for the taillights if if in ok shape __________________ 1967custom Last edited by michael bustamante; 08-03-2009 at 10:31 AM.

08-03-2009, 11:34 AM	#4
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Hi I'm needing the ignition switch and bezels. Do you have a key? Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-03-2009, 11:40 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,844	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA no rush at all take your time __________________ 1967custom

08-03-2009, 12:15 PM	#7
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA I'll take it when its taken out. Thanks, lemme know. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-03-2009, 12:37 PM	#8
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA ok - I'll let you know when it's ready.

08-03-2009, 07:45 PM	#11
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Can i get a pic of the jack and stuff? and shippin to 30297 thanks __________________ Learning as I go! -------------------------------------

08-03-2009, 07:52 PM	#12
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA i see the photos now __________________ Learning as I go! -------------------------------------

08-04-2009, 12:18 AM	#14
dilling Registered User Join Date: Jan 2007 Location: massey Posts: 74	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA I like to come look at cab please email numbwe 302 242 3014

08-04-2009, 02:16 AM	#15
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA How would you like to be paid? Please send payment info. Thanks! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

08-04-2009, 04:06 PM	#16
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Yes, the cab has a title, I can possibly work with delivery for the price of fuel...

08-05-2009, 01:35 PM	#17
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Reasonable offers accepted!

08-06-2009, 07:39 AM	#18
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Ignition key and switch SOLD! Thanks Old Blue, you'll have it in a day or so.

08-06-2009, 04:59 PM	#19
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA The whole cab will be sent to chevy heaven Saturday. Speak up if you want anything out of a 67 cab

08-06-2009, 08:59 PM	#20
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA I will probably be at Carlisle on Saturday if anyone wants me to bring stuff with me. Someone's gotta want a 292!!!



Register or Log In To remove these advertisements.

08-06-2009, 09:22 PM	#21
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA I think Special-K might have been looking for a 292... I'll PM my number, we'll be at Carlisle.. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-06-2009 at 09:22 PM.

08-09-2009, 11:12 PM	#23
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Liquidation sale... Prices updated.

08-14-2009, 09:17 PM	#24
mup123 Registered User Join Date: May 2009 Location: Paradise Newfoundland Canada Posts: 183	Re: Parting 67 C-10 HD rear coils/leafs Harrisburg/Lancaster PA Do you still have the rad support and if so is it in good shape and how much do you want for it

Register or Log In To remove these advertisements.