First project 1970 swb c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVY_BOI93 · 07-03-2011, 03:08 PM

I am 17 years old. My dad bought me this truck early May 2011. This is my first car/truck. My dad and i agreed that he would buy the truck in running conditiond buy that the rest was up to me to fix out of my own pocket. It has a 350 engine with a few mods. and 400TH transmission. I am well on my way with this project. I was really lucky that the body was super straight!!! about 98% RUST FREEOH yeah and i was really lucky that the interior was already done!!!!

Just sharing my story. feel free to give any advice, comments or concerns

hbchevy · 07-03-2011, 03:10 PM

Pictures did not work bud...
Posted via Mobile Device

CHEVY_BOI93 · 07-03-2011, 03:14 PM

im having touble posting the pictures. how do you post them on a thread if you dont mind me asking. it my first time posting pictures

hbchevy · 07-03-2011, 03:23 PM

Hmmm...it worked now, that was weird. So is this gonna be your daily driver I presume? What are your plans for suspension?

Scott
Posted via Mobile Device

CHEVY_BOI93 · 07-03-2011, 03:28 PM

yea daily driver. im keeping the suspension as is for now. not goint to upgrade just yet. my main focus is getting it preped for paint, installing the inner fenders, rear tub wheels, and getting some troque thrust M rims.

hbchevy · 07-03-2011, 04:52 PM

Right on well good luck. The motor looks clean, how does it run? Only thing in my opinion is ditch the tall back seats and put a bench back in....
Posted via Mobile Device

CHEVY_BOI93 · 07-03-2011, 06:21 PM

runs strong it was rebuilt about 15,000 miles ago. only thing is im having issues with the timing.

hbchevy · 07-03-2011, 07:32 PM

What's the problem with the timing?
Posted via Mobile Device

RagingAsian · 07-03-2011, 07:36 PM

Nice project.

lowdown72 · 07-03-2011, 09:00 PM

good lookin truck have u checked to make sure it dont time in the 12 oclock position some of the later 350 balancers time at noon some at the 230 mark welcome to the board

68chevyLQ4 · 07-03-2011, 10:12 PM

nice looking truck man. I like to see the young guys getting into old iron..

CHEVY_BOI93 · 07-03-2011, 11:16 PM

it gets hot after you let it idle for more than 15min. and thats not normal. the pressure hoes starts to release vapor and shots of water. im pretty sure its the timing. i timed it at 0. maybe it moved.

Oh yeah old school trucks all the way man. i don't like any thing pretty much after 1993. all the new stuff is all about FASHION and rims and chrome. and technology. i like the simple stuff. just like the old school trucks.

07-03-2011, 03:08 PM	#1
CHEVY_BOI93 Registered User Join Date: Jun 2011 Location: Denver, CO Posts: 61	First project 1970 swb c10 I am 17 years old. My dad bought me this truck early May 2011. This is my first car/truck. My dad and i agreed that he would buy the truck in running conditiond buy that the rest was up to me to fix out of my own pocket. It has a 350 engine with a few mods. and 400TH transmission. I am well on my way with this project. I was really lucky that the body was super straight!!! about 98% RUST FREEOH yeah and i was really lucky that the interior was already done!!!! Just sharing my story. feel free to give any advice, comments or concerns Last edited by CHEVY_BOI93; 07-03-2011 at 03:23 PM.

07-03-2011, 03:10 PM	#2
hbchevy Registered User Join Date: Jun 2011 Location: Huntington beach Posts: 66	Re: First project 1970 swb c10 Pictures did not work bud... Posted via Mobile Device

07-03-2011, 03:14 PM	#3
CHEVY_BOI93 Registered User Join Date: Jun 2011 Location: Denver, CO Posts: 61	Re: First project 1970 swb c10 im having touble posting the pictures. how do you post them on a thread if you dont mind me asking. it my first time posting pictures

07-03-2011, 03:23 PM	#4
hbchevy Registered User Join Date: Jun 2011 Location: Huntington beach Posts: 66	Re: First project 1970 swb c10 Hmmm...it worked now, that was weird. So is this gonna be your daily driver I presume? What are your plans for suspension? Scott Posted via Mobile Device

07-03-2011, 03:28 PM	#5
CHEVY_BOI93 Registered User Join Date: Jun 2011 Location: Denver, CO Posts: 61	Re: First project 1970 swb c10 yea daily driver. im keeping the suspension as is for now. not goint to upgrade just yet. my main focus is getting it preped for paint, installing the inner fenders, rear tub wheels, and getting some troque thrust M rims.

07-03-2011, 04:52 PM	#6
hbchevy Registered User Join Date: Jun 2011 Location: Huntington beach Posts: 66	Re: First project 1970 swb c10 Right on well good luck. The motor looks clean, how does it run? Only thing in my opinion is ditch the tall back seats and put a bench back in.... Posted via Mobile Device

07-03-2011, 06:21 PM	#7
CHEVY_BOI93 Registered User Join Date: Jun 2011 Location: Denver, CO Posts: 61	Re: First project 1970 swb c10 runs strong it was rebuilt about 15,000 miles ago. only thing is im having issues with the timing.

07-03-2011, 07:32 PM	#8
hbchevy Registered User Join Date: Jun 2011 Location: Huntington beach Posts: 66	Re: First project 1970 swb c10 What's the problem with the timing? Posted via Mobile Device

07-03-2011, 07:36 PM	#9
RagingAsian Registered User Join Date: May 2011 Location: Arizona Posts: 144	Re: First project 1970 swb c10 Nice project. __________________ Susie-Honda Accord Coupe\|Elisa-1968 Chevy C20 Holdin' it down in the 520

07-03-2011, 09:00 PM	#10
lowdown72 Registered User Join Date: Feb 2011 Location: mcminnville tn Posts: 317	Re: First project 1970 swb c10 good lookin truck have u checked to make sure it dont time in the 12 oclock position some of the later 350 balancers time at noon some at the 230 mark welcome to the board __________________ 72 c-10 67 clipped 327 th400

07-03-2011, 10:12 PM	#11
68chevyLQ4 Registered User Join Date: Jan 2011 Location: California Posts: 126	Re: First project 1970 swb c10 nice looking truck man. I like to see the young guys getting into old iron.. __________________ 68 Chevy C-10. swb fleetside. 6.0 4L80E swap. http://67-72chevytrucks.com/vboard/s...d.php?t=460877

07-03-2011, 11:16 PM	#12
CHEVY_BOI93 Registered User Join Date: Jun 2011 Location: Denver, CO Posts: 61	Re: First project 1970 swb c10 it gets hot after you let it idle for more than 15min. and thats not normal. the pressure hoes starts to release vapor and shots of water. im pretty sure its the timing. i timed it at 0. maybe it moved. Oh yeah old school trucks all the way man. i don't like any thing pretty much after 1993. all the new stuff is all about FASHION and rims and chrome. and technology. i like the simple stuff. just like the old school trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.