Show me your body lifts! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyChevy87 · 01-29-2010, 09:47 AM

I'm looking to get a 3 inch body lift for my truck. It's on 33 12.50s.

What did you have to move or relocate? Any chance it will clear 35's later on?

HeavyChevy87 · 01-29-2010, 09:50 AM

Can someone move this to 4x4 tech? Thanks!

ToughBowtieTruck · 01-29-2010, 10:07 AM

Front bumper needs relocating to look right. I don't think there is a kit for 73-80 frames though . . . might want to check.

Fan shroud needs some sort of modifying as well as the fuel filler neck.

If you have a manual transmission, you need to lengthen the clutch rod if it is a mechanical linkage. Same with 4 wheel drive if it isn't a 205 transfer case.

Master cylinder brake lines need to be checked to see if they can stretch too. Look over the wiring harness and make sure nothing is being stretched.

Also anything from frame mounting to the body like ground wires, axle vent tubes, etc need to be taken care of.

That's pretty much it.

67chevy77 · 01-29-2010, 10:38 PM

when i bought my truck(77 k10) all it had was a 3 inch body and it cleared 35s (on 10 in wide rims) but if i remember right i had to bind the little lip on the front finder because it rubbed a little.

**special-K** · 01-29-2010, 11:03 PM

My 35s mounted on 10" wheels rub some with a 4" lift on my`91 Suburban.

01-29-2010, 09:47 AM	#1
HeavyChevy87 Registered User Join Date: Aug 2009 Location: Cedartown, Georgia Posts: 11	Show me your body lifts! I'm looking to get a 3 inch body lift for my truck. It's on 33 12.50s. What did you have to move or relocate? Any chance it will clear 35's later on? Last edited by HeavyChevy87; 01-29-2010 at 10:26 AM.

01-29-2010, 09:50 AM	#2
HeavyChevy87 Registered User Join Date: Aug 2009 Location: Cedartown, Georgia Posts: 11	Re: Show me your body lifts! Can someone move this to 4x4 tech? Thanks!

01-29-2010, 10:07 AM	#3
ToughBowtieTruck Registered User Join Date: Dec 2009 Location: MI Posts: 111	Re: Show me your body lifts! Front bumper needs relocating to look right. I don't think there is a kit for 73-80 frames though . . . might want to check. Fan shroud needs some sort of modifying as well as the fuel filler neck. If you have a manual transmission, you need to lengthen the clutch rod if it is a mechanical linkage. Same with 4 wheel drive if it isn't a 205 transfer case. Master cylinder brake lines need to be checked to see if they can stretch too. Look over the wiring harness and make sure nothing is being stretched. Also anything from frame mounting to the body like ground wires, axle vent tubes, etc need to be taken care of. That's pretty much it. __________________ -Josh "Mr. Simpson, there are thousands of people like you with no discernible talent." Duff World Records Division "Yeah, they're called Congress!!" -Homer Simpson

01-29-2010, 10:38 PM	#4
67chevy77 Registered User Join Date: Jan 2009 Location: Saluda, Virginia Posts: 131	Re: Show me your body lifts! when i bought my truck(77 k10) all it had was a 3 inch body and it cleared 35s (on 10 in wide rims) but if i remember right i had to bind the little lip on the front finder because it rubbed a little. __________________ Justin 1977 chevrolet rebuilt 350 9 inches of lift with 40s 4.56 gears. Work in progress. 1967 4x4 -sold- 1988 reg cab short bed 4x4 -sold- 1999 GMC extended cab short bed new body style Lifted on 33s. Last edited by 67chevy77; 01-29-2010 at 11:23 PM.

01-29-2010, 11:03 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Show me your body lifts! My 35s mounted on 10" wheels rub some with a 4" lift on my`91 Suburban. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-29-2010 at 11:05 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.