Is this the right part??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mike Quillici · 02-01-2010, 01:25 AM

I have a hole in the passenger side floor of my C-10 at the point where the floor curves up toward the firewall at the seam of the vertical kick panel. Can somebody tell me if this is the correct replacement part? I think it looks right.

Thanks,

Mike

http://www.classicparts.com/1967-72-...info/45%2D942/

whatnow123 · 02-01-2010, 01:31 AM

It's the right part based on the discription however, the photo is mis-leading as it's hard to tell which side that one is for.

Mike Quillici · 02-01-2010, 01:42 AM

Yeah. I was having a hard time with that too, which is why I asked. Thanks for the info.

Mike Quillici · 02-05-2010, 12:41 AM

I'm trying to figure out what my options are to patch the holes in my floor board. I'm not trying to create a show truck, but a quality work truck that doesn't leak and to stop the rust from continuing to propagate. I will ultimately be covering it with a new carpet, so I don't much care what it looks like.

vectorit · 02-05-2010, 12:55 AM

Don't know about your rig.
But it looks like the front passenger floor in my 68 burb, with the body mount to frame bolt hole recess.

Mike Quillici · 02-05-2010, 12:58 AM

Yeup. That is it exactly.

02-01-2010, 01:25 AM	#1
Mike Quillici Registered User Join Date: Oct 2009 Location: Sacramento, CA Posts: 161	Is this the right part??? I have a hole in the passenger side floor of my C-10 at the point where the floor curves up toward the firewall at the seam of the vertical kick panel. Can somebody tell me if this is the correct replacement part? I think it looks right. Thanks, Mike http://www.classicparts.com/1967-72-...info/45%2D942/ __________________ 1972 Chevy C-10 ~ 188,000 miles give or take

02-01-2010, 01:31 AM	#2
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: Is this the right part??? It's the right part based on the discription however, the photo is mis-leading as it's hard to tell which side that one is for. __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

02-01-2010, 01:42 AM	#3
Mike Quillici Registered User Join Date: Oct 2009 Location: Sacramento, CA Posts: 161	Re: Is this the right part??? Yeah. I was having a hard time with that too, which is why I asked. Thanks for the info. __________________ 1972 Chevy C-10 ~ 188,000 miles give or take

02-05-2010, 12:41 AM	#4
Mike Quillici Registered User Join Date: Oct 2009 Location: Sacramento, CA Posts: 161	Re: Is this the right part??? I'm trying to figure out what my options are to patch the holes in my floor board. I'm not trying to create a show truck, but a quality work truck that doesn't leak and to stop the rust from continuing to propagate. I will ultimately be covering it with a new carpet, so I don't much care what it looks like. __________________ 1972 Chevy C-10 ~ 188,000 miles give or take

02-05-2010, 12:55 AM	#5
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Is this the right part??? Don't know about your rig. But it looks like the front passenger floor in my 68 burb, with the body mount to frame bolt hole recess. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

02-05-2010, 12:58 AM	#6
Mike Quillici Registered User Join Date: Oct 2009 Location: Sacramento, CA Posts: 161	Re: Is this the right part??? Yeup. That is it exactly. __________________ 1972 Chevy C-10 ~ 188,000 miles give or take



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.