2003 Silverado Steering "Knock" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72Much · 10-10-2010, 02:54 PM

When I turn the wheel on my truck in either direction as I'm driving, I get the odd knocking sound. Any ideas what it could be or how to fix it? I've heard it was a common defect in these trucks but I would like to fix it. I gets annoying. Thanks!

**truckdude239** · 10-10-2010, 06:10 PM

steering intermediate shalf

C10-Driver · 10-10-2010, 07:33 PM

^^ I agree ^^.

I just replaced mine and the "knock" is gone. You need part # 19153614. You can get them from GMPartsDirect but I bought one off eBay for $49.99. Looks like the average selling price is between $70 and $80.

Here is a thread on the gmfullsize forum that includes step by step instructions on how to replace it.

http://www.gmfullsize.com/forum/show...ponents&page=2

northerngmc · 10-10-2010, 09:19 PM

Yeah the intermediate steering shaft is a common problem in the past 10 years for GM trucks.

I have done some research over the past couple of weeks and just ordered a new ISS and lower column bushing for my 2004.

Some people have luck by install a 2" muffler clamp around the lower column bushing to support it. I tried but it did not work.

Here is a list of possible solutions, good luck.

http://www.dieselplace.com/forum/sho...d.php?t=354400

clinebarger · 10-10-2010, 09:50 PM

Ive had good luck with this..http://www.borgeson.com/xcart/produc...cat=130&page=1, A little pricy but a very well made product.

JohnC · 10-11-2010, 08:46 PM

I had this problem on my 03 Sierra 1500HD. I had an intermediate shaft ready to put in just hadn't got around to it. I went to the link that C10-Driver posted. In the post there was talk about the bushing on the upper part of the steering shaft. The member had put a hose clamp around it to tighten up the slack that the bushing was encountering. I tried this today, and it solved my problem. For a $1.29 hose clamp vs. a $45+ steering shaft I would suggest it first.

10-10-2010, 02:54 PM	#1
72Much Registered User Join Date: Nov 2006 Location: Newbern, Tn. Posts: 36	2003 Silverado Steering "Knock" When I turn the wheel on my truck in either direction as I'm driving, I get the odd knocking sound. Any ideas what it could be or how to fix it? I've heard it was a common defect in these trucks but I would like to fix it. I gets annoying. Thanks!

10-10-2010, 06:10 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,219	Re: 2003 Silverado Steering "Knock" steering intermediate shalf __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-10-2010, 07:33 PM	#3
C10-Driver Chevy Truck Addict Join Date: Aug 2006 Location: Kelowna, BC Posts: 1,176	Re: 2003 Silverado Steering "Knock" ^^ I agree ^^. I just replaced mine and the "knock" is gone. You need part # 19153614. You can get them from GMPartsDirect but I bought one off eBay for $49.99. Looks like the average selling price is between $70 and $80. Here is a thread on the gmfullsize forum that includes step by step instructions on how to replace it. http://www.gmfullsize.com/forum/show...ponents&page=2 __________________ . 1970 Chev C/10 SWB, 355 SBC, 700R4, 3.73 Posi, Air Ride (Click to view Build Thread) (SOLD) 1978 Chevy C/10 SWB 1970 Pontiac Lemans .

10-10-2010, 09:19 PM	#4
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: 2003 Silverado Steering "Knock" Yeah the intermediate steering shaft is a common problem in the past 10 years for GM trucks. I have done some research over the past couple of weeks and just ordered a new ISS and lower column bushing for my 2004. Some people have luck by install a 2" muffler clamp around the lower column bushing to support it. I tried but it did not work. Here is a list of possible solutions, good luck. http://www.dieselplace.com/forum/sho...d.php?t=354400 __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-10-2010, 09:50 PM	#5
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: 2003 Silverado Steering "Knock" Ive had good luck with this..http://www.borgeson.com/xcart/produc...cat=130&page=1, A little pricy but a very well made product.

10-11-2010, 08:46 PM	#6
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: 2003 Silverado Steering "Knock" I had this problem on my 03 Sierra 1500HD. I had an intermediate shaft ready to put in just hadn't got around to it. I went to the link that C10-Driver posted. In the post there was talk about the bushing on the upper part of the steering shaft. The member had put a hose clamp around it to tighten up the slack that the bushing was encountering. I tried this today, and it solved my problem. For a $1.29 hose clamp vs. a $45+ steering shaft I would suggest it first.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.