The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > S10 S15 Luv Blazer

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-17-2011, 01:26 AM   #1
Papa-J
Registered User
 
Papa-J's Avatar
 
Join Date: Jun 2011
Location: Calgary, Alberta
Posts: 52
Question 1996 Chevy S10 Ext cab reg box questions

Hey all, I'm a bit of a noob with newer vehicles, by newer I mean about 1990 and on, All of my xp is with the mid 70's to late 80's trucks. My questions are quite simple i think.

I have the 2.2L 4 banger engine/5 speed manual and it gets the exact same gas mileage as my 4.3L GMC Sonoma 1994 did. about 450-500 Km's a tank. If i heard right before I was told the V6 4.3L was a engine know for being hard on gas.

Would it be worth upgrading to a 350 or another size engine? if so what are the best engine's for my truck in your opinions? I'm thinking the 2.2L is just too underpowered for the truck am I right? anyone know what tranny came in these?

thank-you
__________________
------------------------------------------------------
1968 Chevrolet C10 - Needs lots of love
1996 Chevrolet S10
Born and raised on the east coast
Papa-J is offline   Reply With Quote
Old 06-19-2011, 12:26 AM   #2
Papa-J
Registered User
 
Papa-J's Avatar
 
Join Date: Jun 2011
Location: Calgary, Alberta
Posts: 52
Re: 1996 Chevy S10 Ext cab reg box questions

nothing?
__________________
------------------------------------------------------
1968 Chevrolet C10 - Needs lots of love
1996 Chevrolet S10
Born and raised on the east coast
Papa-J is offline   Reply With Quote
Old 06-19-2011, 09:24 AM   #3
Restrorob
The One And Only !!!
 
Restrorob's Avatar
 
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
Re: 1996 Chevy S10 Ext cab reg box questions

Papa-J, I'm no help on these little rigs since I've never owned one. But if you contact a site moderator, They can move this thread to the S10 section that may net you the info your looking for.....
__________________
93 Jeep XJ
88 Buick La Sabra
Toys;
88 TA-GTA in the works....
97 GMC Ext. Cab
502 Crate 5 Spd......Sucks Gas But Haulz Azz !


The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic.


"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Restrorob is offline   Reply With Quote
Old 06-19-2011, 10:01 AM   #4
kevhill85
91 SWB 383
 
kevhill85's Avatar
 
Join Date: Feb 2003
Location: Crandall,TX
Posts: 643
Re: 1996 Chevy S10 Ext cab reg box questions

I have the 2.2L 4 banger engine/5 speed manual and it gets the exact same gas mileage as my 4.3L GMC Sonoma 1994 did. about 450-500 Km's a tank. If i heard right before I was told the V6 4.3L was a engine know for being hard on gas. That depends on your foot and driving habbits.

Would it be worth upgrading to a 350 or another size engine? That would depends on money, skill and gas prices.

if so what are the best engine's for my truck in your opinions? The 4.3 is a good motor for these truck. I like the 383 in mine I have had.

I'm thinking the 2.2L is just too underpowered for the truck am I right? Yes

anyone know what tranny came in these? 4.3 has the 4l60e ... The 2.2 had a 5 speed and some had auto.not sure what model... I have always removed the motor and trany for a v-8 and700r4
Posted via Mobile Device
__________________
96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040,
http://photobucket.com/albums/q169/k...ahoe prostreet
kevhill85 is offline   Reply With Quote
Old 06-19-2011, 10:06 PM   #5
Papa-J
Registered User
 
Papa-J's Avatar
 
Join Date: Jun 2011
Location: Calgary, Alberta
Posts: 52
Re: 1996 Chevy S10 Ext cab reg box questions

Quote:
Originally Posted by Restrorob View Post
Papa-J, I'm no help on these little rigs since I've never owned one. But if you contact a site moderator, They can move this thread to the S10 section that may net you the info your looking for.....
Thanks, and sorry, I was not aware there was a S10 section, I was looking, but i guess not looking hard enough.


Thanks @kevhill85 Thats what i figured, 350 install would not be a problem for me as long as I'm not cutting strut towers. I was wonder would the 5 speed I have mount to a 4.3 or any v8 engine or would a v6 and v8 just chew it up?
__________________
------------------------------------------------------
1968 Chevrolet C10 - Needs lots of love
1996 Chevrolet S10
Born and raised on the east coast
Papa-J is offline   Reply With Quote
Old 06-20-2011, 01:53 PM   #6
Papa-J
Registered User
 
Papa-J's Avatar
 
Join Date: Jun 2011
Location: Calgary, Alberta
Posts: 52
Re: 1996 Chevy S10 Ext cab reg box questions

supposedly there is a mount kit for the 350 engine, anyone use one before?
__________________
------------------------------------------------------
1968 Chevrolet C10 - Needs lots of love
1996 Chevrolet S10
Born and raised on the east coast
Papa-J is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com