Does that Starter come off when you replace a tranny - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Locutus · 08-10-2003, 10:37 AM

I am swapping my TH350 and its been a long time since I have done this, does the starter have to be removed to drop the tranny or not??

Mike

mtdave2 · 08-10-2003, 10:45 AM

i dont think so. it sits on the engine side of the fly wheel mounted to to block. so i think you are ok..

krue · 08-10-2003, 11:04 AM

Mine bolts to the engine.

**FRENCHBLUE72** · 08-10-2003, 11:25 AM

Nope you can remove the tranny and leave the started in place as long as it bolt's to the block and not the tranny. It does sometime's help to remove the floor hump to access the bellhousing bolt's. Hope this help's ya out..

08-10-2003, 10:37 AM	#1
Locutus Registered User Join Date: Jan 2003 Location: Santa Fe, Texas Posts: 250	Does that Starter come off when you replace a tranny I am swapping my TH350 and its been a long time since I have done this, does the starter have to be removed to drop the tranny or not?? Mike

08-10-2003, 10:45 AM	#2
mtdave2 newly minted old timer Join Date: Dec 1999 Location: Hudson WI Posts: 3,507	i dont think so. it sits on the engine side of the fly wheel mounted to to block. so i think you are ok.. __________________ ____________________________________________ 72 c20 longhorn 65k org miles and counting! 69 k10 Suburban

08-10-2003, 11:04 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Mine bolts to the engine. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-10-2003, 11:25 AM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Nope you can remove the tranny and leave the started in place as long as it bolt's to the block and not the tranny. It does sometime's help to remove the floor hump to access the bellhousing bolt's. Hope this help's ya out.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.