OH Floor Vent Door Control Rods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968SWBBigBlock · 04-07-2014, 09:48 AM

SOLD SOLD
I have a pair of vent control rods for the vent doors in the kick panels.
Includes a couple of screws as well.

$12.00 shipped to your door

1968SWBBigBlock · 04-11-2014, 02:11 PM

ttt

1968SWBBigBlock · 10-03-2014, 05:47 PM

TTT Lowered Price

vidman · 10-03-2014, 06:45 PM

What is the lowered price...Interested

1968SWBBigBlock · 10-03-2014, 07:00 PM

I was at 20.00 before lowered to 15.00

1968SWBBigBlock · 10-05-2014, 08:00 PM

Ttt

1968SWBBigBlock · 10-15-2014, 11:40 AM

TTT
Lowered the price to 12.00 shipped to your door in the lower 48.00

1968SWBBigBlock · 11-14-2014, 09:26 AM

tttttttttt

Willie Makeit · 11-02-2015, 06:02 PM

long shot i know, but do you still have these?

DaBeast'68 · 11-03-2015, 10:12 AM

Shat year those come out of?

DaBeast'68 · 11-03-2015, 10:13 AM

Sorry, what year?

1968SWBBigBlock · 11-03-2015, 11:18 AM

Willie & DaBeast.
I honestly can't say for sure what year or if I still have them.
I know I bought them for my 68 but I also think most if not all years are interchangeable.

I think they are still around.
Bear with me I just got my Achilles repaired and I can't get down the stairs to look at some of my stash.
I look and advise asap

Willie Makeit · 11-03-2015, 05:39 PM

No worries. If you still have them shoot me a PM. A friend was looking for a set (along with the doors) and not sure he has found any yet.

thanks!

04-07-2014, 09:48 AM	#1
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Floor Vent Door Control Rods SOLD SOLD I have a pair of vent control rods for the vent doors in the kick panels. Includes a couple of screws as well. $12.00 shipped to your door Attached Images __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree Last edited by 1968SWBBigBlock; 11-14-2015 at 10:03 AM. Reason: lowered price

04-11-2014, 02:11 PM	#2
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods ttt __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

10-03-2014, 05:47 PM	#3
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods TTT Lowered Price __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

10-03-2014, 06:45 PM	#4
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: Floor Vent Door Control Rods What is the lowered price...Interested __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

10-03-2014, 07:00 PM	#5
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods I was at 20.00 before lowered to 15.00 __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

10-05-2014, 08:00 PM	#6
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods Ttt __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

10-15-2014, 11:40 AM	#7
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods TTT Lowered the price to 12.00 shipped to your door in the lower 48.00 __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

11-14-2014, 09:26 AM	#8
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods tttttttttt __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

11-02-2015, 06:02 PM	#9
Willie Makeit Registered User Join Date: Oct 2013 Location: Alabama Posts: 1,206	Re: Floor Vent Door Control Rods long shot i know, but do you still have these?

11-03-2015, 10:12 AM	#10
DaBeast'68 Registered User Join Date: Jul 2007 Location: Albuquerque, NM Posts: 37	Re: Floor Vent Door Control Rods Shat year those come out of?

11-03-2015, 10:13 AM	#11
DaBeast'68 Registered User Join Date: Jul 2007 Location: Albuquerque, NM Posts: 37	Re: Floor Vent Door Control Rods Sorry, what year?

11-03-2015, 11:18 AM	#12
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Floor Vent Door Control Rods Willie & DaBeast. I honestly can't say for sure what year or if I still have them. I know I bought them for my 68 but I also think most if not all years are interchangeable. I think they are still around. Bear with me I just got my Achilles repaired and I can't get down the stairs to look at some of my stash. I look and advise asap __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

11-03-2015, 05:39 PM	#13
Willie Makeit Registered User Join Date: Oct 2013 Location: Alabama Posts: 1,206	Re: Floor Vent Door Control Rods No worries. If you still have them shoot me a PM. A friend was looking for a set (along with the doors) and not sure he has found any yet. thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.