Good deal on tach dashes ! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 07-16-2015, 05:53 PM

I was going thru Cookville, Tn Craigslist and found this ad for restored tach dashes built by Ed Dial ,Ed's been selling them on ebay for 12 years and hadn't heard of this site until I talked to him and ordered one for myself . Ed's a guy who used to go to all the truck shows but he's had to give that up and restores the dashes to stay busy he builds them one at a time and only has a few ready to ship Maybe we can help out the little guy and keep him busy !. His price on ebay is $450.00 but he is selling them thru Craigslist for $400.00 with free shipping . Best price I've seen on them yet .

http://cookeville.craigslist.org/pts/5058157296.html

**michael bustamante** · 07-16-2015, 06:08 PM

i wonder if he restores supplied guage clusters as well

steveo3318 · 07-16-2015, 06:23 PM

Thats awesome thank you for posting his info. I would much rather use a factory refurbish than an LMC. I will be giving him a call shortly. Wonder if he does the vacuum gauge as well

**Grumpy old man** · 07-16-2015, 10:26 PM

Here is his ebay ad

http://www.ebay.com/itm/Restored-Tac...469c40&vxp=mtr

sy2767 · 07-17-2015, 12:46 AM

If the CDN dollar ever goes up this will be on my list!

trapdoor2 · 07-17-2015, 11:28 AM

I had one in my hands a few weeks ago when I went picking in Shelbyville, TN. Stopped in with Chuck Hutchinson, got some goodies for the '69 and he brought out one of Edd's dashes.

The workmanship looked top-notch to me. Very clean and beautiful.

I've emailed Edd to see if he can provide blackface gauges (like original), I don't mind the whiteface but would prefer it to look more stock.

OrangeCrush1970 · 07-17-2015, 11:36 AM

Looks good! I too would like to know if he has them with the OE black face

trapdoor2 · 07-17-2015, 02:21 PM

Quote:

Originally Posted by OrangeCrush1970

Looks good! I too would like to know if he has them with the OE black face

Just got a response from Edd, blackface is no problem. He doesn't have any in stock at the moment so it might take a week or so to get the black faces in.

OrangeCrush1970 · 07-17-2015, 02:49 PM

Good to know, thanks for the update!

Rem14 · 07-17-2015, 07:39 PM

Does anyone know if these gauges work with an LS swap on a 70 c10

**Grumpy old man** · 07-18-2015, 08:39 AM

Edd's building me another one , Tach dash for the 3 hole panel so I can use the justdashes.com 3 gauge dash pad in one of my 67's

http://

Rem14 · 07-27-2015, 01:20 AM

Does anyone know if these gauges will work in ls swap trucks

Andy4639 · 07-27-2015, 04:06 AM

Factory gauges can work on the LS motor. You want be reading from the ECU though, you will be just like you are now.

The speedo will have to be changed over to a electronic are go to a GPS. I swapped mine to GPS.

Zeroman · 07-27-2015, 01:00 PM

Anyone know how to get in touch with Ed besides through eBay? The Craigslist post has expired.

I had hoped to order one from him in the next month, or two.

trapdoor2 · 07-27-2015, 03:50 PM

Quote:

Originally Posted by Zeroman

Anyone know how to get in touch with Ed besides through eBay? The Craigslist post has expired.

I had hoped to order one from him in the next month, or two.

I only got him thru the craigslist address. No idea of his real email address.

He does run the craigslist ad (and ebay) on a regular basis, I'd just start checking when you get ready to order.

Elliot949 · 07-27-2015, 09:03 PM

I used T-Bone that is a Member of this board... he is a Great guy with alot of knowledge on these trucks and gauge setups... I would highly recommend T-Bone...

07-16-2015, 05:53 PM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Good deal on tach dashes ! I was going thru Cookville, Tn Craigslist and found this ad for restored tach dashes built by Ed Dial ,Ed's been selling them on ebay for 12 years and hadn't heard of this site until I talked to him and ordered one for myself . Ed's a guy who used to go to all the truck shows but he's had to give that up and restores the dashes to stay busy he builds them one at a time and only has a few ready to ship Maybe we can help out the little guy and keep him busy !. His price on ebay is $450.00 but he is selling them thru Craigslist for $400.00 with free shipping . Best price I've seen on them yet . http://cookeville.craigslist.org/pts/5058157296.html Last edited by Grumpy old man; 07-16-2015 at 06:00 PM.

07-16-2015, 06:08 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,844	Re: Good deal on tach dashes ! i wonder if he restores supplied guage clusters as well __________________ 1967custom

07-16-2015, 06:23 PM	#3
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Good deal on tach dashes ! Thats awesome thank you for posting his info. I would much rather use a factory refurbish than an LMC. I will be giving him a call shortly. Wonder if he does the vacuum gauge as well __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

07-16-2015, 10:26 PM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Good deal on tach dashes ! Here is his ebay ad http://www.ebay.com/itm/Restored-Tac...469c40&vxp=mtr

07-17-2015, 12:46 AM	#5
sy2767 Registered User Join Date: Feb 2015 Location: alberta Posts: 30	Re: Good deal on tach dashes ! If the CDN dollar ever goes up this will be on my list!

07-17-2015, 11:28 AM	#6
trapdoor2 Registered User Join Date: May 2015 Location: Huntsville, AL Posts: 37	Re: Good deal on tach dashes ! I had one in my hands a few weeks ago when I went picking in Shelbyville, TN. Stopped in with Chuck Hutchinson, got some goodies for the '69 and he brought out one of Edd's dashes. The workmanship looked top-notch to me. Very clean and beautiful. I've emailed Edd to see if he can provide blackface gauges (like original), I don't mind the whiteface but would prefer it to look more stock. __________________ ===Marc '55 Buick Roadmaster Riviera 76R '69 Chevy C-10 CST/10 396 LWB, auto, air, PS (PB soon!)

07-17-2015, 11:36 AM	#7
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Re: Good deal on tach dashes ! Looks good! I too would like to know if he has them with the OE black face __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun

07-17-2015, 02:49 PM	#9
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Re: Good deal on tach dashes ! Good to know, thanks for the update! __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun

07-17-2015, 07:39 PM	#10
Rem14 Registered User Join Date: Dec 2011 Location: Laredo tx Posts: 27	Re: Good deal on tach dashes ! Does anyone know if these gauges work with an LS swap on a 70 c10

07-18-2015, 08:39 AM	#11
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Good deal on tach dashes ! Edd's building me another one , Tach dash for the 3 hole panel so I can use the justdashes.com 3 gauge dash pad in one of my 67's http://

07-27-2015, 01:20 AM	#12
Rem14 Registered User Join Date: Dec 2011 Location: Laredo tx Posts: 27	Re: Good deal on tach dashes ! Does anyone know if these gauges will work in ls swap trucks

07-27-2015, 04:06 AM	#13
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Good deal on tach dashes ! Factory gauges can work on the LS motor. You want be reading from the ECU though, you will be just like you are now. The speedo will have to be changed over to a electronic are go to a GPS. I swapped mine to GPS. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

07-27-2015, 01:00 PM	#14
Zeroman Registered User Join Date: Mar 2013 Location: Houston, TX Posts: 348	Re: Good deal on tach dashes ! Anyone know how to get in touch with Ed besides through eBay? The Craigslist post has expired. I had hoped to order one from him in the next month, or two.

07-27-2015, 09:03 PM	#16
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: Good deal on tach dashes ! I used T-Bone that is a Member of this board... he is a Great guy with alot of knowledge on these trucks and gauge setups... I would highly recommend T-Bone... __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.