Carb and carb adaptor question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bosco200 · 11-08-2015, 02:30 PM

Hey guys, so I have 72 C20 with a inline 250 and a single barrel mono jet carb, the carb is shot, I've rebuilt it multiple times and it's just doesn't have much life left to it, so I was wanting to put a 2 barrel on, and was wondering what adaptor I would need and what carb would work best, the engine is completely stock. If you could give me a link for where I could get them that would be great thanks.
Posted via Mobile Device

bosco200 · 11-09-2015, 10:05 AM

Anyone?

geezer#99 · 11-09-2015, 10:47 AM

http://www.langdonsstovebolt.com/sto...=0&sort=normal

88Ironduke · 11-09-2015, 02:14 PM

I installed one Tom Langdons Weber carbs, a 32/36 progressive and it is extremely nice. The adapter fits well, you just have to work out the carb linkage but its pretty simple.

bosco200 · 11-10-2015, 12:25 PM

Thanks guys

Sixteen Tons · 11-11-2015, 05:01 PM

x2 on the Weber 32/36 and Langdon's Stovebolt site. You might be able to find the carb via CL or Ebay for a hair cheaper, but Langdon's has them set up and ready to go with the intake adaptor and linkage available as well. Worthwhile upgrade to your 250 without a doubt !!

11-08-2015, 02:30 PM	#1
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Carb and carb adaptor question Hey guys, so I have 72 C20 with a inline 250 and a single barrel mono jet carb, the carb is shot, I've rebuilt it multiple times and it's just doesn't have much life left to it, so I was wanting to put a 2 barrel on, and was wondering what adaptor I would need and what carb would work best, the engine is completely stock. If you could give me a link for where I could get them that would be great thanks. Posted via Mobile Device

11-09-2015, 10:05 AM	#2
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Re: Carb and carb adaptor question Anyone?

11-09-2015, 10:47 AM	#3
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,522	Re: Carb and carb adaptor question http://www.langdonsstovebolt.com/sto...=0&sort=normal

11-09-2015, 02:14 PM	#4
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Carb and carb adaptor question I installed one Tom Langdons Weber carbs, a 32/36 progressive and it is extremely nice. The adapter fits well, you just have to work out the carb linkage but its pretty simple. __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

11-10-2015, 12:25 PM	#5
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Re: Carb and carb adaptor question Thanks guys

11-11-2015, 05:01 PM	#6
Sixteen Tons Registered User Join Date: Aug 2012 Location: BALTIMORE Posts: 96	Re: Carb and carb adaptor question x2 on the Weber 32/36 and Langdon's Stovebolt site. You might be able to find the carb via CL or Ebay for a hair cheaper, but Langdon's has them set up and ready to go with the intake adaptor and linkage available as well. Worthwhile upgrade to your 250 without a doubt !! __________________ Wanda - 1969 C/10 LWB 250 I6 3OTT LWB>SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.