Emissions. 86' GMC, what am i missing? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BladeX · 01-03-2004, 03:45 AM

Ok i figure its getting old me posting about my crappy emissions.

Im just missing a couple things.

I got Air Pump...Air Pump Belt and the hose that comes off the air pump at the end of that is a Tee connector.

I picked up a a air pump check valve and i got 2 air pipes 1 for each side.

what else am i missing?

The air check valve has one end that has threads in it and the other end looks like ya use a hose clamp to keep it on. So i think im missing whats between the tee and the air manifolds.

Anyone got a checklist of emissions. And dont say order a LMC catalog cause i already did :p

Ratpowerd67 · 01-03-2004, 02:26 PM

alot of those rubber hose runs back into your fuel canister next to the driver fender....rat

Ratpowerd67 · 01-03-2004, 02:28 PM

hey i got an 87 454 out back, ill give you a pic if you want, they should be very close to the same setup....rat

BladeX · 01-03-2004, 03:33 PM

alright.

i know im missing a hose or 2 but im not sure what they are called.

phantom dually · 01-03-2004, 04:19 PM

Do your manifold have the heat riser tubes??

*1FaastC10* · 01-03-2004, 05:29 PM

what engine are we dealing with here? i've got all the emissions stuff that i yanked off of my 305.

BladeX · 01-03-2004, 05:30 PM

Its the 305 (H)

i dont even know what heat riser tubes are...hehe

--My Manifolds-=

Ratpowerd67 · 01-03-2004, 08:27 PM

do you have the thermostat housing with the plastic thing with all the small hoses?

BladeX · 01-03-2004, 09:05 PM

i think so. if its the saucer lookin thing with like 5 hoses coming off it then yes

and yes im a n00b. lol

I got the pump all instaed and the thing blows air. i just dont know what i need to connect the rubber house that has a plastic 3 way tee on the end of it to the Air pipes that are on the exhaust manifolds. Plus i have a air pump check valve not sure where that goes.

crackajacka · 01-05-2004, 02:38 AM

might pick up a shop manual for your truck

01-03-2004, 03:45 AM	#1
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	Emissions. 86' GMC, what am i missing? Ok i figure its getting old me posting about my crappy emissions. Im just missing a couple things. I got Air Pump...Air Pump Belt and the hose that comes off the air pump at the end of that is a Tee connector. I picked up a a air pump check valve and i got 2 air pipes 1 for each side. what else am i missing? The air check valve has one end that has threads in it and the other end looks like ya use a hose clamp to keep it on. So i think im missing whats between the tee and the air manifolds. Anyone got a checklist of emissions. And dont say order a LMC catalog cause i already did :p Last edited by BladeX; 01-03-2004 at 03:50 AM.

01-03-2004, 04:19 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Do your manifold have the heat riser tubes?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-03-2004, 05:30 PM	#7
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	Its the 305 (H) i dont even know what heat riser tubes are...hehe --My Manifolds-= Last edited by BladeX; 01-03-2004 at 05:33 PM.

01-05-2004, 02:38 AM	#10
crackajacka Stylin Join Date: Sep 2001 Location: Tuttle, OK Posts: 620	might pick up a shop manual for your truck __________________ Ive been traveling for some time, with my fishin pole and my bottle of shyne. Most Girls like finished products and just dont understand what a good addiction does for you http://www.paulwall.us/

01-03-2004, 02:26 PM	#2
Ratpowerd67 Registered User Join Date: Aug 2002 Location: Trenton ,Texas Posts: 328	alot of those rubber hose runs back into your fuel canister next to the driver fender....rat

01-03-2004, 02:28 PM	#3
Ratpowerd67 Registered User Join Date: Aug 2002 Location: Trenton ,Texas Posts: 328	hey i got an 87 454 out back, ill give you a pic if you want, they should be very close to the same setup....rat

01-03-2004, 03:33 PM	#4
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	alright. i know im missing a hose or 2 but im not sure what they are called.

01-03-2004, 05:29 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	what engine are we dealing with here? i've got all the emissions stuff that i yanked off of my 305.

01-03-2004, 08:27 PM	#8
Ratpowerd67 Registered User Join Date: Aug 2002 Location: Trenton ,Texas Posts: 328	do you have the thermostat housing with the plastic thing with all the small hoses?

01-03-2004, 09:05 PM	#9
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	i think so. if its the saucer lookin thing with like 5 hoses coming off it then yes and yes im a n00b. lol I got the pump all instaed and the thing blows air. i just dont know what i need to connect the rubber house that has a plastic 3 way tee on the end of it to the Air pipes that are on the exhaust manifolds. Plus i have a air pump check valve not sure where that goes.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.