The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-16-2016, 04:05 AM   #1
bluboti
Registered User
 
Join Date: Mar 2008
Location: Gig Harbor, WA
Posts: 29
Angry starter motor won't turn off after engaging

Here's the deal, I have a 1969 C-20 350, TH400. Went to leave work, cranked a couple times and died. Solenoid clicked on two tries then no power anywhere. This happened a couple times that evening. Battery had 12.6 volts. Put in a rebuilt starter from NAPA, still didn't start. Ignition switch, nothin. Replaced a 12 year old Pertronix Igniter, nothin. Put shifter in neutral, fired up, but no brake lights. Just installed a new neutral safety switch, started right up in park, but the starter will not stop running and no brake lights or signals. Anybody have suggestions?
__________________
bluboti is offline   Reply With Quote
Old 11-16-2016, 12:02 PM   #2
raggedjim
Senior Member
 
raggedjim's Avatar
 
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,568
Re: starter motor won't turn off after engaging

Sometimes a low battery voltage will cause the solenoid contacts to weld together which will cause the starter to keep cranking. I'd charge the crap out of the battery and then try again.

The fact you have been rewiring things kinda makes me lean toward the wiring though...
__________________
Roger

'68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675
'69 ('70?) 2wd Blazer
'70 GMC Jimmy 2wd
'73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203
raggedjim is offline   Reply With Quote
Old 11-16-2016, 07:53 PM   #3
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,803
Re: starter motor won't turn off after engaging

I'm just trying to figure out what Pertronix Igniter would have to do with the starter not cranking. And the starter not stopping sounds really bad, that will drain your battery and overheat and damage the starter in a very short time. I hope you disconnected the battery quickly.
dmjlambert is online now   Reply With Quote
Old 11-16-2016, 08:57 PM   #4
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: starter motor won't turn off after engaging

if the starter teeth are stuck into the flywheel this will also keep the solinoid engaged
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 11-16-2016, 09:10 PM   #5
dmjlambert
Senior Member
 
dmjlambert's Avatar
 
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,803
Re: starter motor won't turn off after engaging

Well, that would probably call for shims.

One thing I learned The Hard Way, is "repair" battery terminals are bad. I thought I was the only one who felt that way, and then I ran across this picture on Google:

dmjlambert is online now   Reply With Quote
Old 11-19-2016, 10:35 PM   #6
bluboti
Registered User
 
Join Date: Mar 2008
Location: Gig Harbor, WA
Posts: 29
Thumbs up Re: starter motor won't turn off after engaging

Update, the starter ended up being faulty. She fired up and runs great! Needs a little timing adjustment though. Still runs strong after 244,000 original miles. Thanks for those who replied.
__________________
bluboti is offline   Reply With Quote
Reply

Bookmarks

Tags
brake lights, neutral safety switch, starter

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com