|
03-12-2018, 02:49 PM | #1 |
Registered User
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Pushrods
I have be looking for a set of push rods. I am a little confused on which ones to get. So I am looking for help from the group here. It is a 350 stock engine. Any help would be great. John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
03-12-2018, 06:04 PM | #2 |
Account Suspended
Join Date: Jun 2015
Location: No longer here
Posts: 1,000
|
Re: Pushrods
Do you have guide plates ?
|
03-12-2018, 07:39 PM | #3 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Pushrods
If your engine is a stock 79 flat tappet 350 you can use a stock pushrod. 5/16 diameter, 7.794 length.
https://www.speedwaymotors.com/Speed...Inch,3214.html |
03-12-2018, 11:48 PM | #4 |
Registered User
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Re: Pushrods
Thanks YoungPup1977 , No it does not. Thanks Again.
Thanks B. W., That is good news, I should have checked this site before I ordered and paid for a set from Advance Auto. It would have been a lot cheaper going with Speedway. Speedway $19.99 , Advance $34.99. Thanks Again, John
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. |
03-13-2018, 03:43 PM | #5 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,947
|
Re: Pushrods
Stock pushrods for a 350 can be bought over the counter at any auto parts store.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
Bookmarks |
Thread Tools | |
Display Modes | |
|
|