Our 72 build pics... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

azsmokey · 01-28-2008, 08:45 AM

I am fairly new to the board but have been given a lot of good advice and ideas. I have been keeping detailed pics of every phase of the tear down and will create a build journal when we are done. Here are a few pics of where we are so far. Our donor truck is a 2003 Silverado SS that took a hit in the passenger side. A bonus to the deal was a Vortech blower on the 6.0L.

jrdv · 01-28-2008, 08:49 AM

Looks like the start of a great project!
Can't wait to see more pics and details.

**SactoJim** · 01-28-2008, 11:46 AM

Nice fricken donor truck!!

If you don't mind me asking.....how much did you have to give for it (donor)?

Gonna make a helluva fun ride!

azsmokey · 01-28-2008, 01:04 PM

Thanks! I was happy to find that truck with only 20k and a great interior that I want to use in the build. It was just under 10k, which I thought was a great deal for just the motor, trans, blower, PCM, etc... Lots of work ahead now. I cant wait to fire up the 6.0L in the 72!

68GMCCustom · 01-28-2008, 01:12 PM

Nice project! I'm going to be building an LS based myself but won't have the benefit of the Vortech!

don't know if you plan to work it in along with the '03 IFS front axle....but that SS has the NVG-149, a full time, viscous type AWD that splits torque at something like 38% front and 62% rear, but can move torque front or rear as needed for up to 0/100% or 100/0% split. It will handle all kinds of horsepower (I know of a twin turbo 438 LSX Sierra Denali being built now using a NVG-149 and looking for 1000hp/1000tq and it had a radix 6.0 w/meth inj. and about 500hp before that, just to name one). Best AWD system made by far.

nothing like a 4wheel powerslide!

azsmokey · 01-29-2008, 02:58 AM

To: Sactojim

I went through your build thread on the blue truck! I must say that is a really nice ride!!! You have done a lot of things that I would like to do/hope to be able to do! When the time comes, I will have questions for you!

On another note, I have been daydreaming about using the suspension and AWD setup from the 03 SS and grafting it into a 2WD C-10. I dont want to use it in the K-10 because of the lift and the desire to build stout front and rear axles. Does anyone have a C-10 for sale??? Well, I guess I better do one project at a time. I get ahead of myself sometimes. Maybe I should put a 67-72 body onto the 03 frame? Maybe I could create an extended cab 67-72 to match the longer wheelbase... Hmmmmm

azsmokey · 01-29-2008, 03:00 AM

I must attribute the new idea, listed above to 68GMCCustom! Thanks for the idea!!!

**SactoJim** · 01-29-2008, 01:13 PM

Thanks!

.....and go for the AWD thing.....pretty sure you'd probably be the only one on the planet to have one!

Quote:

Originally Posted by azsmokey

To: Sactojim

I went through your build thread on the blue truck! I must say that is a really nice ride!!! You have done a lot of things that I would like to do/hope to be able to do! When the time comes, I will have questions for you!

On another note, I have been daydreaming about using the suspension and AWD setup from the 03 SS and grafting it into a 2WD C-10. I dont want to use it in the K-10 because of the lift and the desire to build stout front and rear axles. Does anyone have a C-10 for sale??? Well, I guess I better do one project at a time. I get ahead of myself sometimes. Maybe I should put a 67-72 body onto the 03 frame? Maybe I could create an extended cab 67-72 to match the longer wheelbase... Hmmmmm

franky69c10 · 01-29-2008, 07:40 AM

good fine....

**FRENCHBLUE72** · 01-29-2008, 10:19 AM

Holy cow nice donar truck......

franky69c10 · 01-29-2008, 01:36 PM

any updates

68GMCCustom · 01-29-2008, 02:31 PM

seems like since the IFS under the '03 SS is a torsion bar setup (no "springs")....that might even make it easier?

72BlckButy · 01-29-2008, 10:32 PM

This is going to make for one heck of a build, I'm definitely subscribing to this.

Nice donor truck.

greasy68 · 01-29-2008, 10:51 PM

That is going to be some work but that thing is going to haul a** when it is done. I'll be keeping an eye on this thread. Keep up the good work.

azsmokey · 01-30-2008, 12:22 AM

To all that have commented on this thread, I appreciate your comments! I have been looking forward to this build for a while but just haven't found the time to dig into it. Now that I have a little more time to work, I will be doing a lot more.

Next, I have to get the cab and bed off the frame and remove the suspension. I have planned on sending the frame, front and rear diffs, core support and misc items to powdercoat. The cab and doors are going to get media blasted and prepped for some body work. The hood and bed also need a little body work but they should not be too bad. The tailgate on the other hand is going to need to be replaced.

I will keep detailed pics and post them as I go. I am really looking forward to the LS transplant!!!

franky69c10 · 01-30-2008, 12:50 AM

Quote:

Originally Posted by azsmokey

To all that have commented on this thread, I appreciate your comments! I have been looking forward to this build for a while but just haven't found the time to dig into it. Now that I have a little more time to work, I will be doing a lot more.

Next, I have to get the cab and bed off the frame and remove the suspension. I have planned on sending the frame, front and rear diffs, core support and misc items to powdercoat. The cab and doors are going to get media blasted and prepped for some body work. The hood and bed also need a little body work but they should not be too bad. The tailgate on the other hand is going to need to be replaced.

I will keep detailed pics and post them as I go. I am really looking forward to the LS transplant!!!

are u keeping it 4wd or make it 2wd

Ol'Rover · 01-30-2008, 02:40 AM

that things gunna haul!

rodstored-72 · 01-30-2008, 04:04 AM

azsmokey,
i was wondering where you found the donor truck? i try to make it by the yards along buckeye rd area, but they usually don't have that new by the time i get out there. would you mind sharing the place.....

thanks!!

franky69c10 · 01-30-2008, 04:44 AM

Quote:

Originally Posted by rodstored-72

azsmokey,
i was wondering where you found the donor truck? i try to make it by the yards along buckeye rd area, but they usually don't have that new by the time i get out there. would you mind sharing the place.....

thanks!!

have you check'd on 35th ave and broadway, there's alot of junkyard's...

azsmokey · 01-30-2008, 07:50 PM

Quote:

Originally Posted by franky69c10

are u keeping it 4wd or make it 2wd

I am going to keep this project a 4WD. This truck is in great shape overall for a 72 with only one small area of rust. I am going to use either a 4" or 6" lift and 18" wheels wrapped in 35's. I am still trying to decide what transfer case to use. I like the idea of an electronic shift t-case, so I am trying to work out the details with that issue. If anyone has any input I am always open to ideas and suggestions

Quote:

Originally Posted by rodstored-72

azsmokey,
i was wondering where you found the donor truck? i try to make it by the yards along buckeye rd area, but they usually don't have that new by the time i get out there. would you mind sharing the place.....

thanks!!

I actually bought the truck from my neighbor who was going to rebuild it. I guess his now ZO6 put a hold plans to build another toy. His gain is my gain I guess!

It was exactly the type of donor I was looking for. His brother actually owns a local wrecking yard, which is why he got the first pick. I am not sure which one it is though. I will ask him to keep an eye out for another one if you are interested. PM me with specifics.

azsmokey · 02-01-2008, 10:07 AM

I worked on the trucks today and got quite a bit done. The 72 is almost completely stripped with only the cab and bed still attached to the frame. The 12 bolt and Dana 44 are off and disassembled. The frame, diffs, core support and misc items are getting ready for powder coat. There is some body work that needs to be done and a lot that I would like to do. I would really like to do a lot of body smoothing and filling. That will take time! Anyone want to help??? I will supply the refreshments...

The fun begins when I start mocking up the LS motor and new trans. I decided to keep the manual shift tcase instead of an NP243 or similar. Then mocking up the wiring...the fun begins!

68GMCCustom · 02-08-2008, 01:14 PM

ah hell....just leave the NVG-149 behind that 4L65! No floor shifter needed for the t-case since it's AWD, all the time.

franky69c10 · 02-08-2008, 02:05 PM

any updates

azsmokey · 06-09-2008, 12:01 PM

I will post more pics of the build as I take them. I am going to try and carefully document the entire assembly phase for a number of reasons. Namely, so I can remember what I did

and also to help others if they attempt a similar build in the future.

Next up is installing the drivetrain for the final time (hopefully), installing the fuel tank for the final time (again hopefully), routing the fuel lines which I will visually document, routing the brake lines, bending and installing the transmission lines and some other misc. The cab, bed and other body panels are going to be blasted, sanded, prepped and painted. I am looking forward to sitting the cab on the frame and getting the whole vehicle wired!

I see that a lot of you have subscribed to this thread. I appreciate that!!! I know that I have gotten a lot of good ideas and have learned a lot from reading a lot of other build threads on this site. I only hope that I can contribute as well. If anyone wants to see any other pics, I would be happy to take and post them. Thanks for the interest!

azsmokey · 07-01-2008, 12:40 AM

The factory crossmember was a problem with the S&P plates, as well as a number of other options. We went with plan B and it was very successful and, in the process, opened up a lot of room around the motor. Now the headers fit with no issues, the supercharger supply lines are free and clear and the motor sits in a much better position.

Here are a few pics of the new crossmember. It is from CPP and is the LS1 swap package that we adapted for the 72.

01-28-2008, 08:45 AM	#1
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Our 72 build pics... I am fairly new to the board but have been given a lot of good advice and ideas. I have been keeping detailed pics of every phase of the tear down and will create a build journal when we are done. Here are a few pics of where we are so far. Our donor truck is a 2003 Silverado SS that took a hit in the passenger side. A bonus to the deal was a Vortech blower on the 6.0L. Attached Images

01-28-2008, 08:49 AM	#2
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: Our 72 build pics... Looks like the start of a great project! Can't wait to see more pics and details. __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

01-28-2008, 11:46 AM	#3
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Our 72 build pics... Nice fricken donor truck!! If you don't mind me asking.....how much did you have to give for it (donor)? Gonna make a helluva fun ride! __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

01-28-2008, 01:04 PM	#4
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... Thanks! I was happy to find that truck with only 20k and a great interior that I want to use in the build. It was just under 10k, which I thought was a great deal for just the motor, trans, blower, PCM, etc... Lots of work ahead now. I cant wait to fire up the 6.0L in the 72!

01-28-2008, 01:12 PM	#5
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Our 72 build pics... Nice project! I'm going to be building an LS based myself but won't have the benefit of the Vortech! don't know if you plan to work it in along with the '03 IFS front axle....but that SS has the NVG-149, a full time, viscous type AWD that splits torque at something like 38% front and 62% rear, but can move torque front or rear as needed for up to 0/100% or 100/0% split. It will handle all kinds of horsepower (I know of a twin turbo 438 LSX Sierra Denali being built now using a NVG-149 and looking for 1000hp/1000tq and it had a radix 6.0 w/meth inj. and about 500hp before that, just to name one). Best AWD system made by far. nothing like a 4wheel powerslide! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 01-28-2008 at 01:13 PM.

01-29-2008, 02:58 AM	#6
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... To: Sactojim I went through your build thread on the blue truck! I must say that is a really nice ride!!! You have done a lot of things that I would like to do/hope to be able to do! When the time comes, I will have questions for you! On another note, I have been daydreaming about using the suspension and AWD setup from the 03 SS and grafting it into a 2WD C-10. I dont want to use it in the K-10 because of the lift and the desire to build stout front and rear axles. Does anyone have a C-10 for sale??? Well, I guess I better do one project at a time. I get ahead of myself sometimes. Maybe I should put a 67-72 body onto the 03 frame? Maybe I could create an extended cab 67-72 to match the longer wheelbase... Hmmmmm

01-29-2008, 03:00 AM	#7
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... I must attribute the new idea, listed above to 68GMCCustom! Thanks for the idea!!!

01-29-2008, 07:40 AM	#9
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Our 72 build pics... good fine.... __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-29-2008, 10:19 AM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Our 72 build pics... Holy cow nice donar truck...... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-29-2008, 01:36 PM	#11
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Our 72 build pics... any updates __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-29-2008, 02:31 PM	#12
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Our 72 build pics... seems like since the IFS under the '03 SS is a torsion bar setup (no "springs")....that might even make it easier? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

01-29-2008, 10:32 PM	#13
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Our 72 build pics... This is going to make for one heck of a build, I'm definitely subscribing to this. Nice donor truck. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-29-2008, 10:51 PM	#14
greasy68 Registered User Join Date: Jan 2008 Location: austin texas Posts: 202	Re: Our 72 build pics... That is going to be some work but that thing is going to haul a** when it is done. I'll be keeping an eye on this thread. Keep up the good work. __________________ Mike 68 C10 LWB midnight blue metallic 307ci, 700R4, HEI front discs, leaf spring rear tilt steering wheel, stock ride height, rally wheels, 2007 Dodge Charger(Hemi)

01-30-2008, 12:22 AM	#15
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... To all that have commented on this thread, I appreciate your comments! I have been looking forward to this build for a while but just haven't found the time to dig into it. Now that I have a little more time to work, I will be doing a lot more. Next, I have to get the cab and bed off the frame and remove the suspension. I have planned on sending the frame, front and rear diffs, core support and misc items to powdercoat. The cab and doors are going to get media blasted and prepped for some body work. The hood and bed also need a little body work but they should not be too bad. The tailgate on the other hand is going to need to be replaced. I will keep detailed pics and post them as I go. I am really looking forward to the LS transplant!!!

01-30-2008, 02:40 AM	#17
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Our 72 build pics... that things gunna haul! __________________ 1971 C10 Stepper LSX 5.3/4L60E 3.73 12bolt posi. Father Son Project. In Memory of Bruce C. Shorten. Rest easy Dad. Ill take it fryom here.



Register or Log In To remove these advertisements.

01-30-2008, 04:04 AM	#18
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 1,978	Re: Our 72 build pics... azsmokey, i was wondering where you found the donor truck? i try to make it by the yards along buckeye rd area, but they usually don't have that new by the time i get out there. would you mind sharing the place..... thanks!!

02-01-2008, 10:07 AM	#21
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... I worked on the trucks today and got quite a bit done. The 72 is almost completely stripped with only the cab and bed still attached to the frame. The 12 bolt and Dana 44 are off and disassembled. The frame, diffs, core support and misc items are getting ready for powder coat. There is some body work that needs to be done and a lot that I would like to do. I would really like to do a lot of body smoothing and filling. That will take time! Anyone want to help??? I will supply the refreshments... The fun begins when I start mocking up the LS motor and new trans. I decided to keep the manual shift tcase instead of an NP243 or similar. Then mocking up the wiring...the fun begins!

02-08-2008, 01:14 PM	#22
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Our 72 build pics... ah hell....just leave the NVG-149 behind that 4L65! No floor shifter needed for the t-case since it's AWD, all the time. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-08-2008, 02:05 PM	#23
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Our 72 build pics... any updates __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

06-09-2008, 12:01 PM	#24
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... I will post more pics of the build as I take them. I am going to try and carefully document the entire assembly phase for a number of reasons. Namely, so I can remember what I did and also to help others if they attempt a similar build in the future. Next up is installing the drivetrain for the final time (hopefully), installing the fuel tank for the final time (again hopefully), routing the fuel lines which I will visually document, routing the brake lines, bending and installing the transmission lines and some other misc. The cab, bed and other body panels are going to be blasted, sanded, prepped and painted. I am looking forward to sitting the cab on the frame and getting the whole vehicle wired! I see that a lot of you have subscribed to this thread. I appreciate that!!! I know that I have gotten a lot of good ideas and have learned a lot from reading a lot of other build threads on this site. I only hope that I can contribute as well. If anyone wants to see any other pics, I would be happy to take and post them. Thanks for the interest!

07-01-2008, 12:40 AM	#25
azsmokey Registered User Join Date: Dec 2007 Location: Glendale, AZ Posts: 156	Re: Our 72 build pics... The factory crossmember was a problem with the S&P plates, as well as a number of other options. We went with plan B and it was very successful and, in the process, opened up a lot of room around the motor. Now the headers fit with no issues, the supercharger supply lines are free and clear and the motor sits in a much better position. Here are a few pics of the new crossmember. It is from CPP and is the LS1 swap package that we adapted for the 72. Attached Images

Register or Log In To remove these advertisements.