The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board > projects and builds 88-98

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-13-2015, 03:36 PM   #1
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
97 3500 454 4x4 project

I just picked up this 97 gmc 3500 454 4x4 yesterday. It's dirty, the bed is trash, but everything works except the air as far as I can tell and it's rust free. The front end will need a complete rebuild I'm certain. I'm planning on making this my daily driver, I live 3 miles from work thankfully, and use it when I go up to the farm. My ideas now are to go through it over the winter so I can depend on it. It's a dually now, but I want to change over to a fleetside bed when I'm finished. I only gave 1200 for it so as of now I'm happy with it. Anyone with ideas feel free to throw em at me. this will be a work truck, but I plan on it being a nice one.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 12-13-2015, 03:40 PM   #2
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 12-13-2015, 03:42 PM   #3
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 12-13-2015, 03:45 PM   #4
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 12-13-2015, 03:48 PM   #5
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 12-13-2015, 03:51 PM   #6
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Last one till after Christmas and I start working on it.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 12-13-2015, 04:02 PM   #7
Dieselburb86
Registered User
 
Join Date: Sep 2011
Location: MAPLEWOOD
Posts: 58
Re: 97 3500 454 4x4 project

Looks like a good starting point! I love the srw crew cabs the best!
Dieselburb86 is offline   Reply With Quote
Old 12-26-2015, 02:58 PM   #8
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quick update. Started tearing down the front-end today and the pitman, idler arm, ball joints, and bushings are shot. The tie rods look ok, but there may be so much slop in the rest of the components it's hard to tell. Going to go back with moon everything.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 02-13-2016, 04:58 PM   #9
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Pictures can't do justice to how bad this ball joint was shot.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 02-13-2016, 05:08 PM   #10
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

This is the first time I've ran into forged lower control arms and solid rubber bushings.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496

Last edited by mingoman; 02-13-2016 at 05:15 PM.
mingoman is offline   Reply With Quote
Old 02-13-2016, 05:13 PM   #11
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

My ball joint kit wasn't big enough to install the longer bushing so I had to use all thread to pull the bushings in. It worked. Hopefully I'll get the front end back together in the next few weeks then move to the interior.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 02-15-2016, 02:53 PM   #12
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
Re: 97 3500 454 4x4 project

Good looking project. I drive a 3500 w/454 for a daily as well, but 80+ miles a day. While you've got the front end torn apart, I would recommend a brake upgrade, it takes some parts scrounging, but it's sooooo worth it. My 7,400# truck stops WAY better. I've got it in my thread if you're curious, see signature.

When I did bushings & ball joints I had to get creative with the bench vise and the press to get everything seated/installed properly. The struggle is real when you work on fullsize stuff.
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 02-15-2016, 05:05 PM   #13
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by 83GMCK2500 View Post
Good looking project. I drive a 3500 w/454 for a daily as well, but 80+ miles a day. While you've got the front end torn apart, I would recommend a brake upgrade, it takes some parts scrounging, but it's sooooo worth it. My 7,400# truck stops WAY better. I've got it in my thread if you're curious, see signature.

When I did bushings & ball joints I had to get creative with the bench vise and the press to get everything seated/installed properly. The struggle is real when you work on fullsize stuff.
Just read your thread and loved what you did with your truck, though I hate it got wrecked. You almost make me want to keep this a dually. I like the standard trans too. My work truck now is a 93 k2500 454 with a manual trans. We'll see how I do with the auto lol.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 04-01-2016, 09:52 AM   #14
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Here's before pic. I ended up changing everything except the drive axles and hub bearings though I gave the later a good shot of grease. Went with new rotors as well since the old ones are shot too.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 04-02-2016, 01:12 PM   #15
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Here's a pic with it together again. Took about two seconds to find my oil leak, I need new oil cooler lines, and I drained the front gear box today, going with synthetic.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 04-07-2016, 03:23 AM   #16
Cobalt964ruf
Registered User
 
Cobalt964ruf's Avatar
 
Join Date: Jun 2014
Location: Piedmont, OK
Posts: 364
Re: 97 3500 454 4x4 project

looking good, i just replaced the front balljoints, tierods, wheel bearings, and suspension bushings in the front of my k3500... i feel your pain lol
__________________
1971 K30 burb carbed LS6 th400 np205 d70f 14bff 4whl discs lifted 35 bfg's
1994 k3500 rcsb trophy truck ls427 4l85e bw4401 9.25ifs 14bff g80 35 bfg's
1998 K3500 rclb ls427 4l85e bw4401 9.25ifs 14bff g80 35 bfg's
1999 k3500 crewcab dually 4x4 496ci 4l85e bw4401 9.25ifs 14bff g80 6" lift 37 bfg's
Cobalt964ruf is offline   Reply With Quote
Old 04-11-2016, 09:01 PM   #17
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Got the oil cooler lines changed out, oil changed, and stated on the doors. None of them opened from the inside and one wouldn't open at all. Got them all open and started cleaning year's of dirt off the panels. I picked up a bed that's behind them and a set of rims. I plan on getting those powder coated semi gloss black.
Attached Images
  
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 04-11-2016, 09:03 PM   #18
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Here's an after shot of one I used a ton of soap water and elbow grease.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 04-13-2016, 01:52 PM   #19
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

I'm on nights, but woke up and wanted to make sure of the lights I needed to change this over to led. I brought parts in to clean up in the house. Looked to have years of maybe tobacco spit covering everything.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 05-27-2018, 10:41 PM   #20
diveplane
Registered User
 
Join Date: Nov 2016
Location: Tulsa
Posts: 418
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by mingoman View Post
Here's an after shot of one I used a ton of soap water and elbow grease.
well done amazing what hard work can do..
diveplane is offline   Reply With Quote
Old 04-13-2016, 03:06 PM   #21
83GMCK2500
Registered User
 
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
Re: 97 3500 454 4x4 project

Looking good, slowly getting it cleaned up and presentable.

I've gone so far as to strip everything seat/fixture/trim necessary to get the carpet out of a 1999 Suburban to hang up and pressure wash. Pressure washing worked great on the carpet too.
__________________
Devin

1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt
1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050
1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350

My Introduction with my '83s History
New Daily, the '96
83GMCK2500 is offline   Reply With Quote
Old 04-24-2016, 12:02 PM   #22
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Still doing tons of cleaning. Found my dash had a crack under the grime so I went on a hunt for a replacement. Finally found one not cracked and my color though I'll most likely have to dye everything to match anyway.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 05-03-2016, 08:11 PM   #23
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Got the seats out and the old underwear that was stuffed behind them out as well today. Pulled it out for the first time since I brought it home too. The air should help!
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496

Last edited by mingoman; 05-03-2016 at 08:18 PM.
mingoman is offline   Reply With Quote
Old 05-03-2016, 08:14 PM   #24
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Classic country is awesome! Classic speakers suck! The Hag will never sing me back home through this, they'll have to be upgraded.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 05-03-2016, 08:17 PM   #25
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Talking Re: 97 3500 454 4x4 project

The price tag on this baby just keeps going down!
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com