Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-12-2018, 10:46 PM | #1 |
Registered User
Join Date: Jul 2012
Location: Space Coast, Florida
Posts: 403
|
Tightening ignition switch retainer nut
What do you use to tighten the three slot ignition switch retaining nut?
__________________
1968 SWB Step Side, Big Block, 4L80E , Running! |
03-12-2018, 11:02 PM | #2 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,369
|
Re: Tightening ignition switch retainer nut
-
These are available from most parts vendors.... I made my own from a piece of thin wall tubing. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
03-12-2018, 11:30 PM | #3 |
Who Changed This?
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,225
|
Re: Tightening ignition switch retainer nut
Leon's nicer to the bezel nut that I have been. Use his solution and leave the screwdriver and rubber hammer that I used in the tool box. There is a spanner made for this application, but most people don't buy it if they go to a shop for their repairs.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
05-14-2022, 07:20 PM | #4 | |
Registered User
Join Date: Sep 2016
Location: Ft Smith, AR
Posts: 551
|
Re: Tightening ignition switch retainer nut
Quote:
While I'm at it, what about the tool for the other switch bezels? Thanks for any input. |
|
05-14-2022, 09:14 PM | #5 | |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,369
|
Re: Tightening ignition switch retainer nut
Quote:
Evidently you are looking for a tool for the '67 bezel. You will probably have to make one. For the light and wiper eschuctions I use a pair of needle nose pliers. They really shouldn't be that tight. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
05-14-2022, 09:23 PM | #6 | |
Senior Member
Join Date: Dec 2009
Location: TN.
Posts: 7,864
|
Re: Tightening ignition switch retainer nut
Quote:
I bet cj847 is hunting for the 67 socket tool. The Bezel is 1.025 inch inside diameter. The slots is 1.125 inch maximum inside diameter in 3 places. They are about 0.100 inch wide. The depth is just over 3/4 inch.
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build Last edited by Getter-Done; 05-14-2022 at 09:31 PM. |
|
05-14-2022, 09:41 PM | #7 |
Senior Member
Join Date: Dec 2009
Location: TN.
Posts: 7,864
|
Re: Tightening ignition switch retainer nut
This just popped up in the Amason search.
The review says it won't work on Large Bezel??? Link:https://www.amazon.com/Ignition-Swit...8WTTQV5G&psc=1
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build |
03-12-2018, 11:35 PM | #8 |
Senior Member
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,938
|
Re: Tightening ignition switch retainer nut
The very first thing you'll do AFTER you hit the screwdriver with a hammer and drag the tip if it all across your dash is rush out and buy the $8 wrench for ignition bezels
Many of them have a little bar welded across the top so you can tighten them sufficiently by hand. EDIT: one note - be careful the first time you use one with a bar on it - it may hit your dash bezel and scrape the chrome plastic - just be aware, easy to not see it coming... Last edited by jocko; 03-13-2018 at 10:30 AM. |
03-13-2018, 08:33 AM | #9 |
Senior Member
Join Date: Aug 2013
Location: Grand Island, NE
Posts: 1,483
|
Re: Tightening ignition switch retainer nut
Do local parts stores carry these or do they need to be bought online?
__________________
1949 Chevy 3100 Five Window 1964 Chevy C10 Lambrecht Auction project 1967 Chevy SWB K10 1967 GMC K15 Project Build thread- http://67-72chevytrucks.com/vboard/s...72#post6502772 1968 Chevy Anniversary K10 1991 K5 4" Lift 35's (the wife's toy) |
03-13-2018, 09:03 AM | #10 |
Registered User
Join Date: Jul 2012
Location: Space Coast, Florida
Posts: 403
|
Re: Tightening ignition switch retainer nut
The Truck and Car Shop in Orange California has them for $9.00 plus shipping.
__________________
1968 SWB Step Side, Big Block, 4L80E , Running! |
03-13-2018, 12:11 PM | #11 | |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,369
|
Re: Tightening ignition switch retainer nut
Quote:
LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
Bookmarks |
|
|