4.5/6 Drop, Tire size rollin on 20's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod C/10 · 09-10-2012, 12:21 PM

What do you recommend for a 4.5/6static drop 20x8.5 5.25BS and 20x10 5.5 BS? Please post pics here if you like....... THANKS!
Posted via Mobile Device

LEX · 09-10-2012, 12:26 PM

Seems like a lot of folks here are running 255/40 and 295/40.

**lolife99** · 09-10-2012, 12:42 PM

Quote:

Originally Posted by LEX

Seems like a lot of folks here are running 255/40 and 295/40.

X2.
Toyo Proxes are a good choice for those two sizes.
http://www.discountedwheelwarehouse....ST_2_Tires.cfm

original-71 · 09-10-2012, 02:17 PM

you can do 255/35/20 and 275/35/20 depending on how how much side wall you like.

HotRod C/10 · 09-10-2012, 02:25 PM

Quote:

Originally Posted by original-71

you can do 255/35/20 and 275/35/20 depending on how how much side wall you like.

I like how yours sits, what tire are you running?
Posted via Mobile Device

original-71 · 09-10-2012, 02:41 PM

Quote:

Originally Posted by DSALRAM

I like how yours sits, what tire are you running?
Posted via Mobile Device

the 255/35/20's front and 275/35/20's rear

HotRod C/10 · 09-10-2012, 02:54 PM

What brand?
Posted via Mobile Device

original-71 · 09-10-2012, 03:04 PM

Quote:

Originally Posted by DSALRAM

What brand?
Posted via Mobile Device

mine are Nitto"s

**CC69Rat** · 09-10-2012, 03:37 PM

I like a 255/45 and 295/45

.. but, that's just me.

LEX · 09-10-2012, 03:51 PM

I'll probably do 295/45s in the rear if I do 20s.

HotRod C/10 · 09-10-2012, 10:35 PM

anyone ran 285/40r20 before.......its a good happy medium sidewall at 4.48".

Pro Performance · 09-10-2012, 10:42 PM

When we usually setup tire and wheel combo's, I run a 285/40/20 in the back with a 245/45/20 up front. That gives you the staggered look and the tires are the same height. But, it also comes down to personal opinion. Those sizes I mentioned are availble in the Nitto 420S.

As for backspacing, the numbers you mentioned are good, considering you have the wider rear end in your truck that came in the later 70-72 C10's. Your signature says 68, but did you swap rear ends? If not, you would run around a 4.75" BS on the rear 20x10. Or run a spacer depending on what wheels you are looking to go with.

Here is an image of a 285/40/20 Nitto 420S.

Hotrob72 · 09-10-2012, 10:46 PM

ECE 4.5/6 dropped on 20x10 295/40 & 20x8.5 255/40

HotRod C/10 · 09-11-2012, 12:28 PM

Do you have any pics of them mounted on customers trucks?

Quote:

Originally Posted by Pro Performance

When we usually setup tire and wheel combo's, I run a 285/40/20 in the back with a 245/45/20 up front. That gives you the staggered look and the tires are the same height. But, it also comes down to personal opinion. Those sizes I mentioned are availble in the Nitto 420S.

As for backspacing, the numbers you mentioned are good, considering you have the wider rear end in your truck that came in the later 70-72 C10's. Your signature says 68, but did you swap rear ends? If not, you would run around a 4.75" BS on the rear 20x10. Or run a spacer depending on what wheels you are looking to go with.

Here is an image of a 285/40/20 Nitto 420S.

Posted via Mobile Device

**lolife99** · 09-11-2012, 07:40 AM

Perfect!^^^

HotRod C/10 · 09-11-2012, 12:23 PM

Quote:

Originally Posted by Hotrob72

ECE 4.5/6 dropped on 20x10 295/40 & 20x8.5 255/40

Quote:

Originally Posted by lolife99

Perfect!^^^

Thats the one!
Posted via Mobile Device

Pro Performance · 09-11-2012, 12:55 PM

I don't have any pictures of the trucks we have done with those particular sizes. However, I did find this later model truck on the forums here. Not sure who owns it, but hopefully they don't mind.

The rear tire is the 285/40/20. The front is a 255/35/20 which is shorter than the 245/45/20, since that 245 is the same height as the 285.

HotRod C/10 · 09-12-2012, 12:29 PM

Any others with pics?
Posted via Mobile Device

original-71 · 09-12-2012, 01:52 PM

Quote:

Originally Posted by HotRod C/10

Any others with pics?
Posted via Mobile Device

i need new pics of my truck but heres one. E.C.E 4-1/2 and 6 drop kit with a 1/2 block also in the rear. You can do 6-1/2 in the rear with no c-notch.

Gmcfolife · 03-17-2013, 09:42 PM

Quote:

Originally Posted by original-71

i need new pics of my truck but heres one. E.C.E 4-1/2 and 6 drop kit with a 1/2 block also in the rear. You can do 6-1/2 in the rear with no c-notch.

What is the back spacing on your wheels?
Posted via Mobile Device

HotRod C/10 · 09-12-2012, 02:14 PM

Very nice stance
Posted via Mobile Device

HotRod C/10 · 09-12-2012, 02:15 PM

Id like to see an a$$ shot of that to see what the tire width looks like.....
Posted via Mobile Device

original-71 · 09-12-2012, 02:24 PM

Quote:

Originally Posted by HotRod C/10

Id like to see an a$$ shot of that to see what the tire width looks like.....
Posted via Mobile Device

i think i can help you with that

but theses were taken before i lowered it a 1/2" more now the rear sits pretty even with tire

HotRod C/10 · 09-12-2012, 02:31 PM

That last one is MONEY!
Posted via Mobile Device

original-71 · 09-12-2012, 02:35 PM

Quote:

Originally Posted by HotRod C/10

That last one is MONEY!
Posted via Mobile Device

the 35's arent bad of a ride either i here good things about the 40's and may go that route later, i wish someone made a wide 35 to give it that bubble on the outsides.

09-10-2012, 12:21 PM	#1
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	4.5/6 Drop, Tire size rollin on 20's What do you recommend for a 4.5/6static drop 20x8.5 5.25BS and 20x10 5.5 BS? Please post pics here if you like....... THANKS! Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-10-2012, 12:26 PM	#2
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: 4.5/6 Drop, Tire size rollin on 20's Seems like a lot of folks here are running 255/40 and 295/40.

09-10-2012, 02:17 PM	#4
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: 4.5/6 Drop, Tire size rollin on 20's you can do 255/35/20 and 275/35/20 depending on how how much side wall you like. __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

09-10-2012, 02:54 PM	#7
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 4.5/6 Drop, Tire size rollin on 20's What brand? Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-10-2012, 03:37 PM	#9
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: 4.5/6 Drop, Tire size rollin on 20's I like a 255/45 and 295/45 .. but, that's just me. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

09-10-2012, 03:51 PM	#10
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: 4.5/6 Drop, Tire size rollin on 20's I'll probably do 295/45s in the rear if I do 20s.

09-10-2012, 10:35 PM	#11
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 4.5/6 Drop, Tire size rollin on 20's anyone ran 285/40r20 before.......its a good happy medium sidewall at 4.48". __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-10-2012, 10:42 PM	#12
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 4.5/6 Drop, Tire size rollin on 20's When we usually setup tire and wheel combo's, I run a 285/40/20 in the back with a 245/45/20 up front. That gives you the staggered look and the tires are the same height. But, it also comes down to personal opinion. Those sizes I mentioned are availble in the Nitto 420S. As for backspacing, the numbers you mentioned are good, considering you have the wider rear end in your truck that came in the later 70-72 C10's. Your signature says 68, but did you swap rear ends? If not, you would run around a 4.75" BS on the rear 20x10. Or run a spacer depending on what wheels you are looking to go with. Here is an image of a 285/40/20 Nitto 420S.

09-10-2012, 10:46 PM	#13
Hotrob72 Registered User Join Date: Feb 2012 Location: Bend Oregon Posts: 188	Re: 4.5/6 Drop, Tire size rollin on 20's ECE 4.5/6 dropped on 20x10 295/40 & 20x8.5 255/40 Attached Images __________________ 1971 chevy c10 ECE 4.5/6 dropped 1970 suburban ECE 4/6 Dropped 45K original miles so far 1948 Ford Sedan 1941 Dodge COE 1932 ford roadster the rest are normal drivers

09-11-2012, 07:40 AM	#15
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: 4.5/6 Drop, Tire size rollin on 20's Perfect!^^^ __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

09-11-2012, 12:55 PM	#17
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 4.5/6 Drop, Tire size rollin on 20's I don't have any pictures of the trucks we have done with those particular sizes. However, I did find this later model truck on the forums here. Not sure who owns it, but hopefully they don't mind. The rear tire is the 285/40/20. The front is a 255/35/20 which is shorter than the 245/45/20, since that 245 is the same height as the 285.

09-12-2012, 12:29 PM	#18
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 4.5/6 Drop, Tire size rollin on 20's Any others with pics? Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-12-2012, 02:14 PM	#21
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 4.5/6 Drop, Tire size rollin on 20's Very nice stance Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-12-2012, 02:15 PM	#22
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 4.5/6 Drop, Tire size rollin on 20's Id like to see an a$$ shot of that to see what the tire width looks like..... Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-12-2012, 02:31 PM	#24
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 4.5/6 Drop, Tire size rollin on 20's That last one is MONEY! Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.