![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Junior Member
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
|
91' 4l80e/205 setup with parts
So i've had a few PM's about this setup i listed per wanting too trade for parts but i'm just gonna list it up separately for sale.
1991 V3500 4L80e & NP205 vss parts and conversion I have the following parts for sale removed from a 1991 V3500 crew cab 4x4 with 103,xxx miles. As you know, 1991 was the ONLY year you could get the desireable 4l80e overdrive transmission with the cast iron NP205. This combo is very desirable and sought after for conversions in any older 4x4. Included is almost everything to do a complete conversion to a crew cab 4x4. PO had trans rebuilt (stock, nothing fancy). This is all i have left of the truck. - 4l80e 4x4 transmission rebuilt (stock rebuild) - New torque converter - Original dust cover and dipstick - NP205 VSS (electronic speedometer) round pattern transfer case (not rebuilt) - Original 4l80/205 shifter and knob with linkage - Original t-case boot/retainer ring for inside cab floor - Original crossmember with mount - Original 4l80 trans linkage and frame brackets - All 3 driveshafts ( 2 pc rear, 1 front 4x4 ) - Original 4l80 transmission lines And lastly the very rare 4l80 to np205 factory adapter! Might be able to help with shipping as i travel a bunch and have a friend that transports cars/trucks for living. I also have a Fastenal local that i used to get it all too me. Please serious inquires only. This is my 4th and final setup. I've parted them out on Evilbay and made more than I'm asking, just don't want too deal with the fee's and such. Would rather see a board member use it if possible. $1900.00 For Sale Locally also. NO PAYPAL. I'll accept a cashiers check or cash SOLD SOLD SOLD
__________________
1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. Last edited by 1968vetL-71; 10-21-2016 at 09:17 PM. Reason: item sold |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2010
Location: Stanberry, Missouri
Posts: 223
|
Re: 91' 4l80e/205 setup with parts
Dang it. This is nice. I have the 205 so I hate to pay for parts I cant use. I really want the 4l80......
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Oct 2011
Location: central Oregon
Posts: 1,220
|
Re: 91' 4l80e/205 setup with parts
Aren't you gonna need this for your next crew cab build ?.....
![]()
__________________
88 3+3 454 400 205 410 drw to srw still in pieces 90 3+3 350 400 205 410 srw 84 1/2 ton lb 6.2 4x4 parts truck |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
|
Re: 91' 4l80e/205 setup with parts
Oh i already know i'll kick myself in the rear as soon as i find another crew! My 76 K20 crew is original so i decided to keep it that way. But ya, I'll probably be posting a WTB ad looking for one someday! lol. Oh well!
__________________
1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
|
Re: 91' 4l80e/205 setup with parts
345HP..... I'll take 1500.00 for everything but the 205. That would be the only way i'd split it up. The adapter needs too stay with the trans and everything else. I would't mind keeping the case for a spare project down the road
__________________
1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2010
Location: Stanberry, Missouri
Posts: 223
|
Re: 91' 4l80e/205 setup with parts
Let me do a little looking into some stuff.
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Mar 2013
Location: Ann Arbor, MI
Posts: 1,023
|
Re: 91' 4l80e/205 setup with parts
Would a stand alone controller be needed for the 4L80E?
|
![]() |
![]() |
![]() |
#8 |
Junior Member
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
|
Re: 91' 4l80e/205 setup with parts
Yes. There are a couple builds on here if you search will tell ya all ya need too know. There are some simple easy controllers. Thx
__________________
1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2010
Location: Stanberry, Missouri
Posts: 223
|
Re: 91' 4l80e/205 setup with parts
I am going to have to pass as I have other parts of the build I have to get done first,
|
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
|
Re: 91' 4l80e/205 setup with parts
No problem at all.
For those that have PM'd me and are interested.... I am going too keep this stuff for sale through the end of the weekend. After that i will probably take a trade offer with some parts locally. So if its something you want jump on it!!
__________________
1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. |
![]() |
![]() |
![]() |
#11 |
Active Member
![]() Join Date: Nov 2014
Location: ALVA, FLORIDA
Posts: 113
|
Re: 91' 4l80e/205 setup with parts
Do you have the brace from the transfer case to the transmission and the 2 that go to the motor mount brackets?
|
![]() |
![]() |
![]() |
#12 |
Junior Member
Join Date: Jun 2004
Location: Murfreesboro, Tn
Posts: 1,092
|
Re: 91' 4l80e/205 setup with parts
No, If it came with any other braces or such they were already gone. Everything I have is listed above. Thx
What brace would go between the trans and tcase? Thats a short distance and the adapter would be sufficient. I've never seen such a thing on any of the 4 setups i've had.
__________________
1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() ![]() Join Date: Jan 2015
Location: Kearneysville Wv
Posts: 3,936
|
Re: 91' 4l80e/205 setup with parts
I think he's talking about the round rod that bolts to the pass side of transfer case and the other end bolts to the bell housing and engine using one of the bell housing bolts
|
![]() |
![]() |
![]() |
Bookmarks |
|
|