The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-01-2010, 11:50 AM   #1
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
67 C20 LB Conversion to C10 SB Fleet.

I have a blog of this but thought i better do the same one here to make it easier for you all to read it, and comment. So here I go.

July 23 2010
The Beginning
So here is my truck about 6 or 8 months ago. Essentially unchanged from what it looked like when i bought it off a friend at work. I should add that before i bought this particular truck, i bought a 1967 Chevy C10. This truck was not in the most desirable condition, but at the time I thought that with some hard work it could be done. Since that time it became a parts truck which really all that is left of it is a frame. The one that i am going to cut down.
Attached Images
   
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-01-2010, 11:53 AM   #2
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

New Master Cylinder
So a while ago i stumbled on a 72 GMC 3/4 ton in a junk yard. It had a power master cylinder in it. I asked about the price for it and they let it go for 25 bucks if i remember correctly. I also stripped some more parts off of it but we will get to that later. So here are some pictures of the motor before and after master cylinder change out. The lines are now hooked up.
So here are the Pictures that show it. But it isn't going to work. Its shot.
Attached Images
   
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-01-2010, 12:02 PM   #3
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

The Frame
Well here is a picture of my other truck that I started with. It is the one that I have turned into a parts truck.

So here there it is when I got it trailered it to my house and I took the front clip off. Obviously I got a better truck to work on. This is a picture of it all stripped down into parts and after i sold the cab and then removed to motor and trans.

As you can see it is marked for being chopped. I have to get the truck out of the garage before I can get started on really any frame work. I am pretty close to being able to do that, just new ball joints and the new spindles and discs. It shouldn't take too much longer, although it may reduce my budget a lot.
Attached Images
     
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535

Last edited by mr.chevy; 12-01-2010 at 12:12 PM.
mr.chevy is offline   Reply With Quote
Old 12-01-2010, 12:05 PM   #4
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

Right Now

July 25 2010
So I guess I need to show the Truck as it sits right now. I do have a new tailgate that came out of a junk yard for 50 bucks. Its really straight. The front tires are off in preparation for tearing into the front end.
Attached Images
 
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-01-2010, 12:14 PM   #5
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

Bad News.

July 29 2010

So I don't have any pictures to update you with. Although I ran into a stumbling block, that happens to be with the new spindles I grabbed from the junk yard. This ended up being a waste of money but I didn't get into it to bad. The bad thing is that I drilled my axles and drums. Now I am going to have to buy a whole kit from CPP and call it good. I will have to replace the axles as well if i want them to match the new front that I am going to get. So yeah that sucks, although I am slowly getting the frame stripped down to nothing so that I can chop it down. Right no I am trying to just put the drum brakes on from my 1/2 ton front end. So anyway I thought you all would like this picture of a 54 Chevy that I took a picture of at the local car show.
Attached Images
 
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-01-2010, 12:21 PM   #6
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

1/2 Ton now.

Aug 1 2010
Well as you all know my good truck is a 3/4 ton or at this stage was a 3/4 ton. So my updates are that I converted the front end to a 1/2 ton 6 lug with drums, since my disc conversion didn't work out as well as I planned. So I am going to have to wait until I have more funds to be able to buy the kit from CPP. Anyway i still have to convert the steering linkage over so that is why its not all together in the picture.

Yes my shop is now pretty messy, with all the extra truck parts all over the place. Anyway to update you all on my frame here are some current pics. I don't think there is anything left on it that I still need to take off. I just need to cut the 12" sections in the middle and 8" in the back and then weld it all back together. I am moving the rear cab mounts back right now but I didn't have a big enough drill bit for it. I have drilled the pilot holes though and removed the cab mounts. Oh I also removed the the front end and that will be sand blasted at the same time as the frame.
Attached Images
    
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-01-2010, 01:22 PM   #7
foosed
Registered User
 
foosed's Avatar
 
Join Date: Aug 2008
Location: Huron, sd
Posts: 463
Re: 67 C20 LB Conversion to C10 SB Fleet.

Looks great good work! Someday i'll cut my truck down to a swb too...
__________________
1970 c/10 swb (show truck)
1972 custom/10 deluxe 4x4 (restoration pending)
2011 silverado ecsb z71 (daily driver)
foosed is offline   Reply With Quote
Old 12-01-2010, 07:27 PM   #8
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: 67 C20 LB Conversion to C10 SB Fleet.

glad you decieded to do a thread on here
67chevy1series is offline   Reply With Quote
Old 12-01-2010, 10:09 PM   #9
tanman722001
Registered User
 
tanman722001's Avatar
 
Join Date: Oct 2010
Location: Mocksville,NC
Posts: 419
Re: 67 C20 LB Conversion to C10 SB Fleet.

looking good.
__________________
1991 GMC K2500 4X4 350/auto
1991 Chevy S10 ext cab.
1990 Chevy S10
1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto
tanman722001 is offline   Reply With Quote
Old 12-02-2010, 08:57 PM   #10
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

thanks Guys!
I appreciate it.
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-02-2010, 10:47 PM   #11
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: 67 C20 LB Conversion to C10 SB Fleet.

do you have the tailgate picture
67chevy1series is offline   Reply With Quote
Old 12-03-2010, 12:19 AM   #12
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

not yet i have been super busy, maybe this weekend.
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-04-2010, 02:07 AM   #13
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: 67 C20 LB Conversion to C10 SB Fleet.

oh ok
67chevy1series is offline   Reply With Quote
Old 12-18-2010, 05:30 PM   #14
yukon ratrod
Registered User
 
yukon ratrod's Avatar
 
Join Date: Mar 2010
Location: Whitehorse Yukon
Posts: 321
Re: 67 C20 LB Conversion to C10 SB Fleet.

lookin good! keep up the good work.
yukon ratrod is offline   Reply With Quote
Old 12-19-2010, 03:19 AM   #15
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

here is a pic of what it should look like minus the trim on the side and it should sit a tad lower. LOL!

67chevy1series put it up in another thread. It looks Awesome!
Attached Images
 
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 12-19-2010, 03:34 AM   #16
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: 67 C20 LB Conversion to C10 SB Fleet.

ya it does look pretty sick
67chevy1series is offline   Reply With Quote
Old 12-19-2010, 07:33 PM   #17
RCbowtie69
Registered User
 
RCbowtie69's Avatar
 
Join Date: Dec 2003
Location: Thomasville, NC
Posts: 1,877
Re: 67 C20 LB Conversion to C10 SB Fleet.

looking good so far, keep up the work and pictures coming
RCbowtie69 is offline   Reply With Quote
Old 01-27-2011, 06:53 PM   #18
RCbowtie69
Registered User
 
RCbowtie69's Avatar
 
Join Date: Dec 2003
Location: Thomasville, NC
Posts: 1,877
Re: 67 C20 LB Conversion to C10 SB Fleet.

just checking if u have made any progress on your build. looking good
RCbowtie69 is offline   Reply With Quote
Old 01-27-2011, 09:15 PM   #19
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

Well not really. I did start laying out the cut lines for the bed so that i can start the process of cutting it down. I will probably start working on it as soon as it starts warming up. I am also going to get some 5" drop springs for the back. That's really about it right now. When i start cutting i promise i will get some photos up.
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 01-27-2011, 09:39 PM   #20
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: 67 C20 LB Conversion to C10 SB Fleet.

well you know we are gonna need some pics
67chevy1series is offline   Reply With Quote
Old 03-13-2011, 12:57 AM   #21
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

I know its been a while!

So I finally had some time today to start working on the truck again. A few weeks ago I ordered some 5" drop springs for the back. So I decided to get started installing them today. I got the rear end in and some wheels on it. It looked nice so I decided to put the bed on it so that I could have more room to cut it down. So after putting the bed on by myself, I decided that it looked too good to stop working on it. So I got my welder all set up so for the sheet metal. Then I braced it up with some angle iron. I started to cut one cut but it was late so it will have to wait. So what do you guys think of the ride height?
Attached Images
     
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535
mr.chevy is offline   Reply With Quote
Old 03-13-2011, 01:48 AM   #22
67chevy1series
Registered User
 
67chevy1series's Avatar
 
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
Re: 67 C20 LB Conversion to C10 SB Fleet.

looks great finally you have some progress!!!
67chevy1series is offline   Reply With Quote
Old 03-13-2011, 02:57 PM   #23
franky69c10
chevy runs deep
 
franky69c10's Avatar
 
Join Date: Mar 2006
Location: PHOENIX AZ
Posts: 1,074
Re: 67 C20 LB Conversion to C10 SB Fleet.

TTT
Posted via Mobile Device
__________________
RAIDER NATION


1969 c10 swb soon 2 b on the road...

My LWB is a SWB now
http://67-72chevytrucks.com/vboard/s...d.php?t=498241
franky69c10 is offline   Reply With Quote
Old 03-19-2011, 09:17 PM   #24
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

got some work done today!

So today I cut the front section out of my bed and started welding it back together. It took a little more adjusting than most guys make it seem like is needed. I also ran into a lot of body filler. I think its quite substantial. I am going to have to use a piece of the other side of the panel that I cut off today. either that or I straighten it as best as I can. Thanks for looking. Let me know what you think.
Attached Images
     
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535

Last edited by mr.chevy; 03-19-2011 at 09:18 PM.
mr.chevy is offline   Reply With Quote
Old 03-19-2011, 09:19 PM   #25
mr.chevy
Registered User
 
mr.chevy's Avatar
 
Join Date: Jul 2010
Location: Spanish Fork, Utah
Posts: 209
Re: 67 C20 LB Conversion to C10 SB Fleet.

some more
Attached Images
     
__________________
Ben

Its a 67 Chevy C10 now, and its short now too.
Here is my 1967 Chevy C10 Shortened Build Blog
http://boyescustoms.blogspot.com
Here is my 1967 Chevy C10 Shortened Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=433535

Last edited by mr.chevy; 03-19-2011 at 09:20 PM.
mr.chevy is offline   Reply With Quote
Reply

Bookmarks

Tags
1967, c10, c20, conversion, shortbed


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:19 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com