Billet Aluminum Radio Plate - Gauging Interest for another production run - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 02-24-2013, 01:22 PM

I designed these and sold them for a few years but stopped producing them once other guys started making them as well but I've gotten several inquiries about them lately. If I can get 25 people to buy one I will start selling them again. Since I will have to pay for the upgraded forum membership I will not agree to make them until I have 30 people interested (at least 5 will back out). I should be able to sell them for $75 unpolished (with tooling marks that you will have to sand out) and $95 polished shipped. That includes all the fasteners, the drill template, polishing rag, priority mail shipping and paypal fees. If you'd rather pay by other means than paypal I'm good with that but there won't be any savings because I have to make a special trip to the bank and post office.

If you are interested please reply in the thread. I will not start selling these again until I have enough interest. I've sold lots of these and know exactly how much it costs to make them, please don't comment about the price.

sapper4 · 02-24-2013, 01:47 PM

I'm in for one.

ryanroo · 02-24-2013, 01:49 PM

I am interested. i am in for one of franks to, but i like options. both are nice pieces

is the unpolished just a raw machined aluminum? do you happen to have a pic of the unpolished?

thanks
Ryan

mahanian · 02-24-2013, 06:03 PM

Quote:

Originally Posted by ryanroo

I am interested. i am in for one of franks to, but i like options. both are nice pieces

is the unpolished just a raw machined aluminum? do you happen to have a pic of the unpolished?

thanks
Ryan

I don't have any pictures of the unpolished anymore. It's just the raw machined aluminum but doesn't take much sanding to get the machine marks off. Most of the effort is getting them to a mirror finish.

heathbirkendahl · 02-24-2013, 07:25 PM

Interested. Price?
Posted via Mobile Device

ryanroo · 02-24-2013, 07:47 PM

Quote:

Originally Posted by mahanian

I don't have any pictures of the unpolished anymore. It's just the raw machined aluminum but doesn't take much sanding to get the machine marks off. Most of the effort is getting them to a mirror finish.

ill do the unpolished. i do want one in case i wasnt clear

Ryan

JOJABOY · 02-24-2013, 03:11 PM

Interested.

CParnell · 02-24-2013, 05:50 PM

Count me in.

Rctreadaway · 02-24-2013, 07:54 PM

I'm in!
Posted via Mobile Device

buckskins4ever · 02-24-2013, 08:06 PM

I am in for sure......but contact me for different way of making payment.....I refuse to use paypal. send me an email and we can arrange it another way. Hopefully you will be making a run soon, would be great to top off my new dash setup.

mahanian · 02-24-2013, 09:07 PM

Quote:

Originally Posted by heathbirkendahl

Interested. Price?
Posted via Mobile Device

Price options are listed in the first thread

Quote:

Originally Posted by buckskins4ever

I am in for sure......but contact me for different way of making payment.....I refuse to use paypal. send me an email and we can arrange it another way. Hopefully you will be making a run soon, would be great to top off my new dash setup.

No problem, I'm sure we could work something out

gotchamel · 02-24-2013, 10:33 PM

I would like 1 unpolished please.Can I do a check or money order?

jetfixr · 02-24-2013, 10:37 PM

I would be in for 2

mahanian · 02-24-2013, 11:20 PM

Quote:

Originally Posted by gotchamel

I would like 1 unpolished please.Can I do a check or money order?

Yep, not a problem

Quote:

Originally Posted by dohyde34

can you powder-coat one black? if so i am in

Anodize is a better option, another member contacted me about having them anodized, I'll see what he charges

Quote:

Originally Posted by jetfixr

I would be in for 2

Sounds good

*dohyde34* · 02-24-2013, 11:33 PM

Quote:

Originally Posted by mahanian

Anodize is a better option, another member contacted me about having them anodized, I'll see what he charges

ok, sounds good....IF you this, when would you have them ready?

*dohyde34* · 02-24-2013, 10:36 PM

can you powder-coat one black? if so i am in

Towstrap · 02-25-2013, 12:12 AM

whats the size of opening to see what radio can be use

*dohyde34* · 02-25-2013, 12:32 AM

Quote:

Originally Posted by Towstrap

whats the size of opening to see what radio can be use

good question

mahanian · 02-25-2013, 01:26 PM

Quote:

Originally Posted by dohyde34

ok, sounds good....IF you this, when would you have them ready?

From the time I order to the time I deliver them to your house it should be a month

Quote:

Originally Posted by Towstrap

whats the size of opening to see what radio can be use

It will fit any DIN size stereo, so pretty much any aftermarket stereo.
Posted via Mobile Device

Sklptrljay · 02-25-2013, 01:25 AM

Count me in for one unpolished.

jetfixr · 02-25-2013, 01:13 PM

Oh, almost for got.... both polished

67ChevyRedneck · 02-25-2013, 01:44 PM

I bought one of these a few years ago, still looks great. Well worth the $ fellas.
Posted via Mobile Device

ChevyCruizer · 02-25-2013, 01:50 PM

Jared,

1 unpolished for me.

Thanks, John

Plowman · 02-25-2013, 03:16 PM

I would like to purchase one. I don't understand computers very good but if you send me an e-mail with a phone number I will call you to arrange payment.
Posted via Mobile Device

OregonNed · 02-25-2013, 04:33 PM

I would be interested..

02-24-2013, 01:22 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Billet Aluminum Radio Plate - Gauging Interest for another production run I designed these and sold them for a few years but stopped producing them once other guys started making them as well but I've gotten several inquiries about them lately. If I can get 25 people to buy one I will start selling them again. Since I will have to pay for the upgraded forum membership I will not agree to make them until I have 30 people interested (at least 5 will back out). I should be able to sell them for $75 unpolished (with tooling marks that you will have to sand out) and $95 polished shipped. That includes all the fasteners, the drill template, polishing rag, priority mail shipping and paypal fees. If you'd rather pay by other means than paypal I'm good with that but there won't be any savings because I have to make a special trip to the bank and post office. If you are interested please reply in the thread. I will not start selling these again until I have enough interest. I've sold lots of these and know exactly how much it costs to make them, please don't comment about the price. Attached Images __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 03-20-2013 at 02:20 PM.

02-24-2013, 01:47 PM	#2
sapper4 Registered User Join Date: Dec 2011 Location: Hope Mills, NC Posts: 62	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in for one.

02-24-2013, 01:49 PM	#3
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I am interested. i am in for one of franks to, but i like options. both are nice pieces is the unpolished just a raw machined aluminum? do you happen to have a pic of the unpolished? thanks Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

02-24-2013, 07:25 PM	#5
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Interested. Price? Posted via Mobile Device __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

02-24-2013, 03:11 PM	#7
JOJABOY Registered User Join Date: Sep 2012 Location: Factory Posts: 681	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Interested.

02-24-2013, 05:50 PM	#8
CParnell Registered User Join Date: Feb 2009 Location: Calgary, AB, Canada Posts: 156	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Count me in. __________________ 1968 GMC 910 Project Tommy 1974 Olds Cutlass

02-24-2013, 07:54 PM	#9
Rctreadaway Registered User Join Date: Jan 2013 Location: Monroe, NC Posts: 39	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm in! Posted via Mobile Device

02-24-2013, 08:06 PM	#10
buckskins4ever Registered User Join Date: Dec 2012 Location: Altoona Iowa Posts: 481	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I am in for sure......but contact me for different way of making payment.....I refuse to use paypal. send me an email and we can arrange it another way. Hopefully you will be making a run soon, would be great to top off my new dash setup.

02-24-2013, 10:33 PM	#12
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I would like 1 unpolished please.Can I do a check or money order?

02-24-2013, 10:37 PM	#13
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I would be in for 2

02-24-2013, 10:36 PM	#16
dohyde34 Account Suspended Join Date: Jun 2012 Location: Emmett, id Posts: 331	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run can you powder-coat one black? if so i am in

02-25-2013, 12:12 AM	#17
Towstrap Registered User Join Date: Oct 2006 Location: davison Mich Posts: 247	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run whats the size of opening to see what radio can be use

02-25-2013, 01:25 AM	#20
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Count me in for one unpolished.

02-25-2013, 01:13 PM	#21
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Oh, almost for got.... both polished

02-25-2013, 01:44 PM	#22
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I bought one of these a few years ago, still looks great. Well worth the $ fellas. Posted via Mobile Device __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

02-25-2013, 01:50 PM	#23
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Jared, 1 unpolished for me. Thanks, John __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

02-25-2013, 03:16 PM	#24
Plowman Registered User Join Date: Jan 2013 Location: Pueblo Colorado Posts: 3	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I would like to purchase one. I don't understand computers very good but if you send me an e-mail with a phone number I will call you to arrange payment. Posted via Mobile Device

02-25-2013, 04:33 PM	#25
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I would be interested.. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

Register or Log In To remove these advertisements.