SC 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wancosc356** · 05-10-2013, 02:21 PM

I've got a 71 non ac cab with clean title and a 67 frame that I haven't had any luck selling. I hate to cut them up but I need to move them. So....let me know what you need cut and the zip code to where the parts will be going. Prices starting at $20 for patches of the cab or pieces of the frame.

OR Take the cab whole for $500 and the frame whole for SOLD....

I'll give this a week or two, then its all going to the scrap yard....

Pictures of the frame and cab can be found here.....pages 3-7

http://s630.photobucket.com/user/wan...?sort=3&page=3

**wancosc356** · 05-11-2013, 10:18 AM

Bump

88fordf150 · 05-11-2013, 07:19 PM

How about under the dash cowl on the passenger side.

88fordf150 · 05-15-2013, 04:53 PM

Quote:

Originally Posted by 88fordf150

How about under the dash cowl on the passenger side.

Did you get a chance to look under the dash at the inner cowl? Thanks

amashal · 05-15-2013, 06:26 PM

If you start cutting the frame I could use both sides directly over the rear end 1' in both directions. previous owner did a homemade step notch and hacking the frame. Shipped to 75002.
Posted via Mobile Device

69SCSS · 05-15-2013, 07:02 PM

I need the driver's side core support bracket if you're still parting the frame. It's the one I circled. Mine's pretty twisted up.

**wancosc356** · 05-11-2013, 08:43 PM

I'll check it out tomorrow and get back to you.

bodydropped72 · 05-12-2013, 10:08 AM

is the frame a lwb or swb? im interested in the whole frame. is it straight with no bends or anything!? text if easier. 757-358-4542

**wancosc356** · 05-12-2013, 10:23 AM

Quote:

Originally Posted by bodydropped72

is the frame a lwb or swb? im interested in the whole frame. is it straight with no bends or anything!? text if easier. 757-358-4542

SWB. It is straight with only the very front piece twisted. I have a straight replacement piece to go with it though. It looks like it got twisted when someone used a tow hook and yanked it. Check out the pictures. Its the U or V shaped piece right in front of the front cross member.

cleanfreak · 05-15-2013, 07:53 AM

Where are you in sc? Interested in the frame , do you have any trailing arms?

**wancosc356** · 05-15-2013, 03:47 PM

Quote:

Originally Posted by cleanfreak

Where are you in sc? Interested in the frame , do you have any trailing arms?

Florence, SC. I don't have any trailing arms or rear axles. Sorry.

cleanfreak · 05-15-2013, 10:13 PM

Quote:

Originally Posted by wancosc356

Florence, SC. I don't have any trailing arms or rear axles. Sorry.

Thanks - about 3 hours the wrong way from where I've got a pick up - thanks

**wancosc356** · 05-18-2013, 08:09 PM

Frame sold to bodydropped72 pending pickup and payment.

Al,
I may have another set of mounts....do you want one or both?

69SCSS · 05-18-2013, 10:12 PM

Quote:

Originally Posted by wancosc356

Frame sold to bodydropped72 pending pickup and payment.

Al,
I may have another set of mounts....do you want one or both?

I just need the driver's side. My passenger side one is straight. Thanks!

Gumby'sC20 · 05-27-2013, 07:06 PM

Any chance you might be able to chop a bedside up? I need the tail light section from the left bedside. Approx 2-3in above and below the tail light assembly and about 3-4 inches down the side of the bed. I know this completely ruins the rest of the bedside, but if you don't have any takers for the whole bedside, and are planning on scrapping it anyways, it might work out. Let me know! Thanks!

69SCSS · 05-30-2013, 01:17 AM

Just checking in, you happen to have that bracket? Going to be having my frame blasted soon and need to get that on there.

Thanks! Al

**wancosc356** · 05-30-2013, 10:03 PM

Quote:

Originally Posted by Gumby'sC20

Any chance you might be able to chop a bedside up? I need the tail light section from the left bedside. Approx 2-3in above and below the tail light assembly and about 3-4 inches down the side of the bed. I know this completely ruins the rest of the bedside, but if you don't have any takers for the whole bedside, and are planning on scrapping it anyways, it might work out. Let me know! Thanks!

Im not scraping the bed or cutting up the bedsides....I will sell you the whole bed and you can cut it up.

Quote:

Originally Posted by 69SCSS

Just checking in, you happen to have that bracket? Going to be having my frame blasted soon and need to get that on there.

Thanks! Al

Sorry for the delay. The frame is gone but I do have a set of brackets. I'll get back to you tomorrow.

05-10-2013, 02:21 PM	#1
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	71 Non AC Cab and 67 Frame.....cutting up for pieces and patches I've got a 71 non ac cab with clean title and a 67 frame that I haven't had any luck selling. I hate to cut them up but I need to move them. So....let me know what you need cut and the zip code to where the parts will be going. Prices starting at $20 for patches of the cab or pieces of the frame. OR Take the cab whole for $500 and the frame whole for SOLD.... I'll give this a week or two, then its all going to the scrap yard.... Pictures of the frame and cab can be found here.....pages 3-7 http://s630.photobucket.com/user/wan...?sort=3&page=3 __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152 Last edited by wancosc356; 05-30-2013 at 10:02 PM. Reason: Sold frame

05-11-2013, 10:18 AM	#2
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches Bump __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

05-11-2013, 07:19 PM	#3
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 473	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches How about under the dash cowl on the passenger side. Attached Images __________________ Brad handshoe

05-15-2013, 06:26 PM	#5
amashal Registered User Join Date: Mar 2008 Location: Allen,TX Posts: 223	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches If you start cutting the frame I could use both sides directly over the rear end 1' in both directions. previous owner did a homemade step notch and hacking the frame. Shipped to 75002. Posted via Mobile Device

05-15-2013, 07:02 PM	#6
69SCSS Registered User Join Date: Aug 2012 Location: Neskowin OR Posts: 1,153	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches I need the driver's side core support bracket if you're still parting the frame. It's the one I circled. Mine's pretty twisted up. Attached Images __________________ My 68 SWB Al Silveira Music <- My daughter loves this guy 8-)

05-11-2013, 08:43 PM	#7
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches I'll check it out tomorrow and get back to you. __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

05-12-2013, 10:08 AM	#8
bodydropped72 Registered User Join Date: Jul 2007 Location: Newport news VA Posts: 4	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches is the frame a lwb or swb? im interested in the whole frame. is it straight with no bends or anything!? text if easier. 757-358-4542

05-15-2013, 07:53 AM	#10
cleanfreak Registered User Join Date: Oct 2009 Location: port robinson ontario canada Posts: 398	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches Where are you in sc? Interested in the frame , do you have any trailing arms?

05-18-2013, 08:09 PM	#13
wancosc356 I Like Mine With No Shine! Join Date: Apr 2009 Location: SC Posts: 2,705	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches Frame sold to bodydropped72 pending pickup and payment. Al, I may have another set of mounts....do you want one or both? __________________ Michael 1967 Chevrolet C10 Short Fleet (Literal Ground Up....One Day) 2006 GMC Sierra Crew Cab 4x4 1969 Lincoln Continental Coupe Project FOR SALE http://67-72chevytrucks.com/vboard/c...ct=4578&cat=17 1981 Honda CM400 C Bobber SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=384152

05-27-2013, 07:06 PM	#15
Gumby'sC20 Registered User Join Date: Jan 2009 Location: Binghamton, N.Y. Posts: 116	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches Any chance you might be able to chop a bedside up? I need the tail light section from the left bedside. Approx 2-3in above and below the tail light assembly and about 3-4 inches down the side of the bed. I know this completely ruins the rest of the bedside, but if you don't have any takers for the whole bedside, and are planning on scrapping it anyways, it might work out. Let me know! Thanks!

05-30-2013, 01:17 AM	#16
69SCSS Registered User Join Date: Aug 2012 Location: Neskowin OR Posts: 1,153	Re: 71 Non AC Cab and 67 Frame.....cutting up for pieces and patches Just checking in, you happen to have that bracket? Going to be having my frame blasted soon and need to get that on there. Thanks! Al __________________ My 68 SWB Al Silveira Music <- My daughter loves this guy 8-)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.