CA 1971 GMC BB Complete Part Out

[budnikguy]

1971 GMC 3/4 ton Utility bed 133" wheel base truck. Has a 402 with a turbo 400. Will be parting completely, please post here with any specific requests. Some things I can thing of off the top of my head

BB Alternator Brackets $90 shipped
BB Power Steering brackets, pump, hoses $180 shipped
BB Exhaust manifolds (assuming no damage when removed) $175 + shipping
Tach Dash $225 + shipping (No wiring)

Please feel free to make requests here and I will post prices..ty

Adam

[uncle]

How much for a/c bracket on intake?

[budnikguy]

Good eye there my friend, $45 shipped.

Originally Posted by uncle

How much for a/c bracket on intake?

[Cash3481]

How about the engine pulling tabs bolted on the intake front and rear, and the windshield washer mount on the pass fender shipped to 67110?
Thanks,
Mike

[budnikguy]

$48 shipped...LMK

Originally Posted by Cash3481

How about the engine pulling tabs bolted on the intake front and rear, and the windshield washer mount on the pass fender shipped to 67110?
Thanks,
Mike

[Cash3481]

[QUOTE=budnikguy;6419339]$48 shipped...LMK

I'll take it! Please pm me paypal info or payment choice.
Mike

[71blksuper4x4]

Got pics of cruise control pieces, tach dash, washer jug holder and front driver steel wheel thanks trevor

[budnikguy]

Will get you pics of requested CC parts and Tach dash ..you are 2nd in line on wash jug bracket and pics are posted of it.

Originally Posted by 71blksuper4x4

Got pics of cruise control pieces, tach dash, washer jug holder and front driver steel wheel thanks trevor

[budnikguy]

Did not get the cruise pieces removed or pic'd yet nor the tach...will shortly. Washer jug holder has previously sold. Did get pics of the front wheels

Originally Posted by 71blksuper4x4

Got pics of cruise control pieces, tach dash, washer jug holder and front driver steel wheel thanks trevor

[budnikguy]

Here is what was there for cruise control...

Originally Posted by 71blksuper4x4

Got pics of cruise control pieces, tach dash, washer jug holder and front driver steel wheel thanks trevor

[uncle]

Pm me for payment info.

[70shortfleet]

How much for the heat shield on the left exhaust manifold for the stove pipe?

[budnikguy]

$115 shipped, will pull and post pics..

Originally Posted by 70shortfleet

How much for the heat shield on the left exhaust manifold for the stove pipe?

[budnikguy]

70shortfleet has first shot @ $115.00 shipped

Originally Posted by 70shortfleet

How much for the heat shield on the left exhaust manifold for the stove pipe?

[71blksuper4x4]

Still interested in tach and cruise items. The wheel I need a pic of is the one that is on the driver side front of the truck. It looks like a deeper dished 16.5 than the others, sorry about that. I am looking for a 8.25 deep 16.5.
Also the piece that is (in pic #6 on the first page) on top of the log chain on the passenger tool box appears to be cruise related as well. Trevor

[budnikguy]

Definitely ok...I think the front driver side matched the both the rear wheels...will check for you to confirm..give me a few days as i am into my, real job, work schedule...

Originally Posted by 71blksuper4x4

Still interested in tach and cruise items. The wheel I need a pic of is the one that is on the driver side front of the truck. It looks like a deeper dished 16.5 than the others, sorry about that. I am looking for a 8.25 deep 16.5.
Also the piece that is (in pic #6 on the first page) on top of the log chain on the passenger tool box appears to be cruise related as well. Trevor

[budnikguy]

drivers side front wheel...

Originally Posted by 71blksuper4x4

Still interested in tach and cruise items. The wheel I need a pic of is the one that is on the driver side front of the truck. It looks like a deeper dished 16.5 than the others, sorry about that. I am looking for a 8.25 deep 16.5.
Also the piece that is (in pic #6 on the first page) on top of the log chain on the passenger tool box appears to be cruise related as well. Trevor

[budnikguy]

PM sent with payment info...

Originally Posted by uncle

Pm me for payment info.

[Critterman71]

Hi I need the carb and air cleaner and spacer and original fuel line if still intact it can be crappy shape but complete even cut as long as most of it is there from pump up to or near the intake area I need it for a pattern. glove box door shipping to 48872

[budnikguy]

Let me get them pulled and then can get you a price..

Originally Posted by Critterman71

Hi I need the carb and air cleaner and spacer and original fuel line if still intact it can be crappy shape but complete even cut as long as most of it is there from pump up to or near the intake area I need it for a pattern. glove box door shipping to 48872

[budnikguy]

Did not have the opportunity to get the slider removed....

carb













air cleaner and spacer







original fuel line



glove box door

Originally Posted by Critterman71

Hi I need the carb and air cleaner and spacer and original fuel line if still intact it can be crappy shape but complete even cut as long as most of it is there from pump up to or near the intake area I need it for a pattern. glove box door shipping to 48872

[Critterman71]

I want the slider window as well depending on the shape of it and shipping cost. wish I was closer I want the rolling chassis as well but to far for me on that.

[budnikguy]

I will get more detailed pics of the rear slider also..

Originally Posted by Critterman71

I want the slider window as well depending on the shape of it and shipping cost. wish I was closer I want the rolling chassis as well but to far for me on that.

[budnikguy]

slider pics... works as it should..latch has surface rust needs to be cleaned up..other than that, looks good!

Originally Posted by Critterman71

I want the slider window as well depending on the shape of it and shipping cost. wish I was closer I want the rolling chassis as well but to far for me on that.

[catch2otwo]

overall condition of the cab? Floors, rockers, corners etc? Rotted? Solid? price? Thanks