The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board > Blazer and Suburban Stuff

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-16-2014, 02:16 AM   #1
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
parting out a 71 blazer.

it's a little rough but has some decent parts witch some have all ready been spoken for . it's f/s here local so some parts that are today may not be f/s the next day . if you think my price is to much make me a fair offer, i don;t get many 4wd's so it's hard to stay on top of some of the prices.
it has a good windshield frame not perfect but very useable. it has 2 spots that consern me .1is top on drivers side where the rain cutter meets about 4 or 5 inches from door top. the other 1 is about middle ways at top near rear fiew mirror the spot welds are coming loose for about 4 or 5 inches see pic.s.
by the time i ship it i would like to get $400.00 out of it but if thats not a fair price i am open to offers.
seat look like they are out of something newer they are high back and work good in there, 2 ft, seats will need covering back seat don't look to bad they are maroon. back seat folds over looks like they have later brackets also all seat & brackets $250.00 would rather not ship them.
it has the big fan should someone has notch it for a hose but still solid and all holes are there it's large so $65.00 shipped.
i will price more parts when i take them off so look back to see whats new. the weather is bad here and if you no me i am because i can't get around good . thanks for looking i hope i can help some of you guys out with your projects needs.
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 02:28 AM   #2
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.






this is a few mis. pics. it has a big heavy duty roll bar if i can get it out i will be asking $300.00 for it.
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 02:38 AM   #3
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.


gas tank & trailer hitch.

windshield frame



__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 02:44 AM   #4
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.


seats


fan should
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 03:09 AM   #5
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.




more of windshield frame



__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 03:19 AM   #6
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.




sun viser brackets visers have seen better days $40.00 shipped.


that is a spider web in the 1 to the right.
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 05:16 AM   #7
Dirt's72
Registered User
 
Join Date: May 2013
Location: Albuquerque, NM
Posts: 1,105
Re: parting out a 71 blazer.

Interested in the gas tank assy and hitch if it's something you may ship. Thanks
Curious too do you think the hitch was a dealer installed item.
Dirt's72 is offline   Reply With Quote
Old 01-16-2014, 06:52 AM   #8
tristan
Registered User
 
Join Date: Sep 2013
Location: Western PA
Posts: 1,295
Re: parting out a 71 blazer.

If the tub floor has some solid sections that might be usable for patching in then I'd be interested if you are going to disassemble it that far.
tristan is offline   Reply With Quote
Old 01-16-2014, 08:30 AM   #9
gmclonghorn
Registered User
 
gmclonghorn's Avatar
 
Join Date: Mar 2011
Location: Westminster, Ca
Posts: 1,104
Re: parting out a 71 blazer.

Interested in carpet strips if it has it?
gmclonghorn is offline   Reply With Quote
Old 01-16-2014, 09:09 AM   #10
richard2717
Equal opportunity joke ofender
 
richard2717's Avatar
 
Join Date: Oct 2011
Location: Eastern Shore of MD
Posts: 9,942
Re: parting out a 71 blazer.

I will jump in line for rear wheel tubs and floor section about 8" all way around the tubs if not rusted and pending shipping to business 21826
__________________
Members I have met.
Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb
https://paypal.me/6772GMtruckparts
Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.
richard2717 is offline   Reply With Quote
Old 01-16-2014, 10:26 AM   #11
briank
Registered User
 
Join Date: Sep 2011
Location: Leland, Il
Posts: 1,503
Re: parting out a 71 blazer.

How about the plastic inserts and screws on the doors near the vent window?
briank is offline   Reply With Quote
Old 01-16-2014, 11:08 AM   #12
1968c
Registered User
 
Join Date: Aug 2012
Location: albany
Posts: 25
Re: parting out a 71 blazer.

How much for the whole windshield frame ship to 31701? Thanks
1968c is offline   Reply With Quote
Old 01-16-2014, 11:24 AM   #13
IronCanine
I'm trying....
 
IronCanine's Avatar
 
Join Date: Oct 2013
Location: Athens, GA
Posts: 2,550
Re: parting out a 71 blazer.

What kind of shape is the driver's door in?
IronCanine is offline   Reply With Quote
Old 01-16-2014, 12:39 PM   #14
Nermal67
Active Member
 
Join Date: Jun 2013
Location: Montrose Colorado
Posts: 129
Re: parting out a 71 blazer.

Not sure how it can be shipped, but if it is possible and not too expensive I'd be interested in the roll bar. Shipping to 81401. Thanks.
Nermal67 is offline   Reply With Quote
Old 01-16-2014, 02:02 PM   #15
HarleyT
Registered User
 
Join Date: Dec 2007
Location: Memphis,Tn.
Posts: 145
Re: parting out a 71 blazer.

I need the fuel filler hose cover on the inside of the tub whick covers the rubber and steel hoses.
HarleyT is offline   Reply With Quote
Old 01-16-2014, 02:06 PM   #16
Blazerowner
Senior Member
 
Blazerowner's Avatar
 
Join Date: Apr 2006
Location: Yuba City, Ca
Posts: 1,939
Re: parting out a 71 blazer.

How about the visors shipped to 95982?
__________________
Kirk
72 Blazer CST 4wd highlander
66 Nova
Blazerowner is offline   Reply With Quote
Old 01-16-2014, 02:43 PM   #17
mtully79
Registered User
 
mtully79's Avatar
 
Join Date: Apr 2007
Location: Acworth, GA
Posts: 441
Re: parting out a 71 blazer.

2nd in line for visors to 23455.

Thanks
mtully79 is offline   Reply With Quote
Old 01-16-2014, 02:44 PM   #18
Banderian
Registered User
 
Banderian's Avatar
 
Join Date: Jan 2012
Location: Bandera, Texas
Posts: 40
Re: parting out a 71 blazer.

Second in line for the visors. I really only need the driver's side. Anybody got one?
Banderian is offline   Reply With Quote
Old 01-16-2014, 02:44 PM   #19
Banderian
Registered User
 
Banderian's Avatar
 
Join Date: Jan 2012
Location: Bandera, Texas
Posts: 40
Re: parting out a 71 blazer.

OOps! one minute too late to be second.
Banderian is offline   Reply With Quote
Old 01-16-2014, 02:54 PM   #20
mtully79
Registered User
 
mtully79's Avatar
 
Join Date: Apr 2007
Location: Acworth, GA
Posts: 441
Re: parting out a 71 blazer.

Close one!
mtully79 is offline   Reply With Quote
Old 01-16-2014, 03:15 PM   #21
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.

1st. i have a sale pending local on the stuff that holds gas tank on.
under dash lights.gas fill tube/cover.
gas tank wire harness/tail light harness.washer pieces on cowl.
kick panel parts.rear fender braces.seat belts.
to all it may take a while to get these parts off and check the shape of them but i will try to go down the list as i get to them. thanks to everyone for looking & interest.
Dirt's72 are you interest in gas tank only ? i am not sure if hitch was a install or not. i have seen them on blazers before and f/s on this board before . you are 1st in line for it.
tristan i will check on floor cond. but it will have to warm up some before i get that far on it.
gmclonghorn no carpet strips.
richard2717 i will check on that part of floor but it will be a while before i get that far on it.
briank if you are talking about the pieces just under the vent windows they are gone.
1968c are talking hole frame cut at top of dash ? i was wanting to get $400.00 shipped for it. did you look at all the pic.s?
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-26-2014, 08:48 AM   #22
THE BOSS
Registered User
 
Join Date: Jun 2012
Location: Kalamazoo MI
Posts: 104
Re: parting out a 71 blazer.

Quote:
Originally Posted by billsbowtie View Post
1st. I have a sale pending:

Gas fill tube/cover.
gone?
THE BOSS is offline   Reply With Quote
Old 01-16-2014, 03:29 PM   #23
billsbowtie
Senior Member
 
billsbowtie's Avatar
 
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
Re: parting out a 71 blazer.

IronCanine both doors are bad.
Nermal67 i think it's to large to ship.
HarleyT i have a sale pending on it.
Blazerowner $40.00 shipped did you see the pic.s?
mtully79 2nd in line on visers.

Banderian 3rd in line on visers.
if i missed anyone let me know.
__________________
i have 67/72 chevy truck parts f/s.
billsbowtie is offline   Reply With Quote
Old 01-16-2014, 04:26 PM   #24
HappyHappyHappy
Registered User
 
Join Date: Oct 2013
Location: Hattiesburg, MS
Posts: 29
Re: parting out a 71 blazer.

Bill, I would like to get the Soft Top and Hardware. Pending a few questions and pics. im going to send you a PM . Thanks
HappyHappyHappy is offline   Reply With Quote
Old 01-16-2014, 04:56 PM   #25
HappyHappyHappy
Registered User
 
Join Date: Oct 2013
Location: Hattiesburg, MS
Posts: 29
Re: parting out a 71 blazer.

just saw your other post on the soft top. Nevermind this one.
HappyHappyHappy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:50 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com