KS Parting a 70 custom 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 09-12-2014, 04:26 PM

Im parting this truck starting this weekend.
It will take untill next weekend to finish it off.
Im keeping the column, motor w/accessories and the transmission linkage.
Its rusty but has alot of parts left to give.
Everything else is up for grabs.
gauges 30
seatbelts 30
auto brake pedal 25
auto crossmember 30
radio knobs, radio, hardware...40
door panels 30
arm rests 15
PB booster 25

Everything is plus shipping
anything else just ask.

**Cash3481** · 09-12-2014, 04:27 PM

more inside pics

engairuph · 10-19-2014, 02:53 PM

Wanting the a/c box under dash and hood. Price and your location my zip is 39540

engairuph · 10-19-2014, 02:58 PM

Wanting the a/c box under dash and hood. Price and your location my zip is 39540

**Cash3481** · 10-19-2014, 10:01 PM

Quote:

Originally Posted by 68panelman

Hi Mike, Did you send this out yet? Thanks.

I did not, mailed a bunch of stuff and forgot it on the bench. Just got back from a funeral in Indiana. I'll get it ready, sent and let you know the shipping tracking number.

Quote:

Originally Posted by engairuph

Wanting the a/c box under dash and hood. Price and your location my zip is 39540

Do you need everything or just the AC related items? Let me know. Sorry for the slow response... I was out of town.

engairuph · 10-20-2014, 06:36 AM

Quote:

Originally Posted by Cash3481

I did not, mailed a bunch of stuff and forgot it on the bench. Just got back from a funeral in Indiana. I'll get it ready, sent and let you know the shipping.

Do you need everything or just the AC related items? Let me know. Sorry for the slow response... I was out of town.

I have nothing so everything but I know some parts will have to be new.thanks Ralph

beetle1960 · 09-12-2014, 04:57 PM

Heck...that ain't rusty..its cool. Wanna see rust come on over to my part of town..

**cst204x4** · 09-12-2014, 05:11 PM

ac bracket with adjusting slot in it. sell separate?

Mr.chivo · 09-12-2014, 05:20 PM

Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

67-72trucks · 09-12-2014, 05:25 PM

Nice Patina

kda2000 · 09-12-2014, 06:16 PM

Mike,

Do you sell the suspension parts? -- Looking for drivers side lower control arm for a 1/2 ton, with the cross shaft and (ideally) a usable ball joint ('68 style), no rust damage. Let me know what you have?

Thanks,
Ken

WCH · 09-12-2014, 06:57 PM

Mike,

I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.

Thanks! Curby

WCH · 09-13-2014, 12:42 PM

Quote:

Originally Posted by WCH

Mike,

I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.

Thanks! Curby

Mike,

How much for the belts, are there 2 or 3? How much for the antenna? Also, looking for a set of sbc A/C pulleys. Shipped 66030

Thanks, Curby

Jake1971 · 09-13-2014, 06:11 PM

I will take the pair of armrests shipped to 78602. LMK total.

**Cash3481** · 09-14-2014, 01:51 AM

Quote:

Originally Posted by 68Bowtie4x4

How much for the winshield rear view mirror assy and the rear window rubber seal and trim?
Let me know.
Thanks.

Pics below

Quote:

Originally Posted by Mr.chivo

Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

Quote:

Originally Posted by Undone

I will get in line for windshield and rear window stainless trim.

Windshield trim is still available.

Quote:

Originally Posted by chevytruckluver

Mike, does that truck have one of these hiding behind the rear bumper?

sorry it does not...

Quote:

Originally Posted by WCH

Mike,
How much for the belts, are there 2 or 3? How much for the antenna? Also, looking for a set of sbc A/C pulleys. Shipped 66030
Thanks, Curby

two belts are here. $30 they are dirty and one has a missing plastic cover, ant $10... all plus shipping. I need to get a box for these for shipping cause of the funny size.

**Already Gone** · 09-15-2014, 11:10 PM

As long as they aren't broken I'll take the Custom 10 emblems with the nuts or whatever that holds them on as from the front fenders depending on price. I'll take the center A/C vent with the holding bracket and what ever holds it on as well. Don't forget I'm in Canada.

**Cash3481** · 09-16-2014, 12:18 AM

Quote:

Originally Posted by Already Gone

As long as they aren't broken I'll take the Custom 10 emblems with the nuts or whatever that holds them on as from the front fenders depending on price. I'll take the center A/C vent with the holding bracket and what ever holds it on as well. Don't forget I'm in Canada.

$20 for both plus shipping. I'll get the shipping price tomorrow am. Can you give me your zip.

**IronCanine** · 09-27-2014, 01:42 PM

Upper door panel trim available? If so how much for trim and glovebox door shipped to 30606?

Thanks,

Brad

**Cash3481** · 09-27-2014, 02:16 PM

Quote:

Originally Posted by IronCanine

Upper door panel trim available? If so how much for trim and glovebox door shipped to 30606?

Thanks,

Brad

Brad,
Here's the upper door trim I have I'll choose the best set for you if you want them. $30 shipped and $20 shipped for the glovebox door. Half of these costs are shipping. I'll send them separate or the cost will be higher. I'll check both ways before I send me out.

68Bowtie4x4 · 09-12-2014, 06:58 PM

How much for the winshield rear view mirror assy and the rear window rubber seal and trim?

Let me know.

Thanks.

**Cash3481** · 09-12-2014, 07:23 PM

Quote:

Originally Posted by beetle1960

Heck...that ain't rusty..its cool. Wanna see rust come on over to my part of town..

I'm from northern Indiana so I know what your saying!

Quote:

Originally Posted by cst204x4

ac bracket with adjusting slot in it. sell separate?

sorry for now I'm keeping the motor and brackets but I'll post back here if that changes..

Quote:

Originally Posted by Mr.chivo

Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

I'll get the pics for you and post them up.

Quote:

Originally Posted by 67-72trucks

Nice Patina

I'd like to build it but the squirrels really set up camp in this one, check out the motor pics. I love the patina too.

Quote:

Originally Posted by kda2000

Mike,

Do you sell the suspension parts? -- Looking for drivers side lower control arm for a 1/2 ton, with the cross shaft and (ideally) a usable ball joint ('68 style), no rust damage. Let me know what you have?
Thanks,
Ken

I'll sell you this entire front end if you wanna come grab it. Lol
I'll sell this front end pieces once it's dismantled.

Quote:

Originally Posted by WCH

Mike,
I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna.
Thanks! Curby

Curby,
I'll get you some pics.

Quote:

Originally Posted by 68Bowtie4x4

How much for the winshield rear view mirror assy and the rear window rubber seal and trim?
Let me know.
Thanks.

have to look at the trim closer when it's removed.$12 for the mirror and $20 for the seal it may not come out easy so I'll see if it does in one piece. I'll take $30 for the window trim. All plus shipping...

68Bowtie4x4 · 09-16-2014, 08:51 PM

have to look at the trim closer when it's removed.$12 for the mirror and $20 for the seal it may not come out easy so I'll see if it does in one piece. I'll take $30 for the window trim. All plus shipping...[/QUOTE]

Do you need a tinted or clear one? Ive shipped a few of them but if you want one closer I understand. I get $25 plus shipping for the tinted ones $20 for the clear.

You stated earlier $12 for the mirror, but then it's $20 or $25 depending upon regular or tinted mirror.

How much are you going to charge for shipping of the tinted mirror to zip 97801?

**Cash3481** · 09-16-2014, 09:07 PM

Quote:

Originally Posted by 68Bowtie4x4

have to look at the trim closer when it's removed.$12 for the mirror and $20 for the seal it may not come out easy so I'll see if it does in one piece. I'll take $30 for the window trim. All plus shipping...

Do you need a tinted or clear one? Ive shipped a few of them but if you want one closer I understand. I get $25 plus shipping for the tinted ones $20 for the clear.

You stated earlier $12 for the mirror, but then it's $20 or $25 depending upon regular or tinted mirror.

How much are you going to charge for shipping of the tinted mirror to zip 97801?[/QUOTE]

Negative... That was if you needed the rear glass (tinted or clear).
Other prices didnt change. $12 is for the rear view mirror.

chuckmc8 · 09-12-2014, 07:25 PM

Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135
I dont need the master cylinder but would like the prop valve and lines that connect to it

Undone · 09-12-2014, 07:58 PM

I will get in line for windshield and rear window stainless trim.

09-12-2014, 04:26 PM	#1
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Parting a 70 custom 10 Im parting this truck starting this weekend. It will take untill next weekend to finish it off. Im keeping the column, motor w/accessories and the transmission linkage. Its rusty but has alot of parts left to give. Everything else is up for grabs. gauges 30 seatbelts 30 auto brake pedal 25 auto crossmember 30 radio knobs, radio, hardware...40 door panels 30 arm rests 15 PB booster 25 Everything is plus shipping anything else just ask. Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness! Last edited by Cash3481; 09-12-2014 at 09:05 PM.

09-12-2014, 04:27 PM	#2
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 70 custom 10 more inside pics Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

10-19-2014, 02:53 PM	#3
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 Wanting the a/c box under dash and hood. Price and your location my zip is 39540

10-19-2014, 02:58 PM	#4
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 Wanting the a/c box under dash and hood. Price and your location my zip is 39540

09-12-2014, 04:57 PM	#7
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: Parting a 70 custom 10 Heck...that ain't rusty..its cool. Wanna see rust come on over to my part of town.. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-12-2014, 05:11 PM	#8
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,000	Re: Parting a 70 custom 10 ac bracket with adjusting slot in it. sell separate? __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

09-12-2014, 05:20 PM	#9
Mr.chivo Registered User Join Date: Feb 2014 Location: Chular California Posts: 165	Re: Parting a 70 custom 10 Will take door mirrors with backing plates pending price and condition, can you take a few shots for me? Thanks.

09-12-2014, 05:25 PM	#10
67-72trucks Registered User Join Date: Jun 2006 Location: Michigan Posts: 530	Re: Parting a 70 custom 10 Nice Patina

09-12-2014, 06:16 PM	#11
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: Parting a 70 custom 10 Mike, Do you sell the suspension parts? -- Looking for drivers side lower control arm for a 1/2 ton, with the cross shaft and (ideally) a usable ball joint ('68 style), no rust damage. Let me know what you have? Thanks, Ken

09-12-2014, 06:57 PM	#12
WCH Registered User Join Date: Jan 2014 Location: Olathe, Ks Posts: 48	Re: Parting a 70 custom 10 Mike, I'll take the seat belts if they are good. Dirty is OK. How about the radio antenna. Thanks! Curby __________________ Curby 1972 Cheyenne 10 LWB 350: Lambrect Survivor 1972 Cheyenne 10 4X4 LWB 350

09-13-2014, 06:11 PM	#14
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 697	Re: Parting a 70 custom 10 I will take the pair of armrests shipped to 78602. LMK total. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

09-15-2014, 11:10 PM	#16
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,104	Re: Parting a 70 custom 10 As long as they aren't broken I'll take the Custom 10 emblems with the nuts or whatever that holds them on as from the front fenders depending on price. I'll take the center A/C vent with the holding bracket and what ever holds it on as well. Don't forget I'm in Canada. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

09-27-2014, 01:42 PM	#18
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,550	Re: Parting a 70 custom 10 Upper door panel trim available? If so how much for trim and glovebox door shipped to 30606? Thanks, Brad

09-12-2014, 06:58 PM	#20
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: Parting a 70 custom 10 How much for the winshield rear view mirror assy and the rear window rubber seal and trim? Let me know. Thanks. __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.

09-16-2014, 08:51 PM	#22
68Bowtie4x4 Registered User Join Date: Oct 2003 Location: Athena, Oregon Posts: 167	Re: Parting a 70 custom 10 have to look at the trim closer when it's removed.$12 for the mirror and $20 for the seal it may not come out easy so I'll see if it does in one piece. I'll take $30 for the window trim. All plus shipping...[/QUOTE] Do you need a tinted or clear one? Ive shipped a few of them but if you want one closer I understand. I get $25 plus shipping for the tinted ones $20 for the clear. You stated earlier $12 for the mirror, but then it's $20 or $25 depending upon regular or tinted mirror. How much are you going to charge for shipping of the tinted mirror to zip 97801? __________________ 72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.



Register or Log In To remove these advertisements.

09-12-2014, 07:25 PM	#24
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting a 70 custom 10 Ill take the booster with the bracket and linkage to the brake pedal pending shipping to 30135 I dont need the master cylinder but would like the prop valve and lines that connect to it __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-12-2014, 07:58 PM	#25
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Parting a 70 custom 10 I will get in line for windshield and rear window stainless trim.

Register or Log In To remove these advertisements.