IL Cutting 3 cabs up... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dustmaker65** · 07-28-2016, 09:36 AM

I am cutting 3 cabs up this weekend. There is no titles to these. There is lots of good metal left. One has a really nice firewall, I just don't know how to cut it out to be able to reuse it. So I will cut pieces out of too. I will get pics up later today or tomorrow.

I also have a 1969 GMC LWB chassis that will get cut up to be hauled away...

Thanks!
Jimmy

rlfletc · 07-28-2016, 10:15 AM

Looking for the jamb tag below the vin.

**Dustmaker65** · 07-28-2016, 01:46 PM

Quote:

Originally Posted by rlfletc

Looking for the jamb tag below the vin.

2 of the cabs are GMC's...not sure if the other has any tags on it.

I will check tonight.

Thanks!
Jimmy

57larry · 07-28-2016, 05:58 PM

how's the floors?

**Dustmaker65** · 07-28-2016, 06:20 PM

Quote:

Originally Posted by rlfletc

Looking for the jamb tag below the vin.

This what your looking for?

michael bustamante · 07-28-2016, 06:11 PM

looking for good kick panals, both sides and the floor on the driver side foot area

**Dustmaker65** · 07-28-2016, 06:24 PM

Quote:

Originally Posted by 57larry

how's the floors?

Sorry Larry, most of the floors are gone.

Quote:

Originally Posted by michael bustamante

looking for good kick panals, both sides and the floor on the driver side foot area

I have a cab that has perfect kick panels, but I am not sure how to remove them?

michael bustamante · 07-28-2016, 06:32 PM

wow is thst a hornets nest?? i need all that floor too thats in the pic all the way to the seat mount riser.
you could just sawz all it all off in one piece

**Dustmaker65** · 07-28-2016, 06:39 PM

Quote:

Originally Posted by michael bustamante

wow is thst a hornets nest?? i need all that floor too thats in the pic all the way to the seat mount riser.
you could just sawz all it all off in one piece

LOL...just insulation hanging down. How many inches of floor pan? And how do I ship these?

Bennett68C10 · 07-28-2016, 07:11 PM

Interested in one of the firewall sections under the heater box and up to the wiring gutter just above heater box. Some pics of where mine is rotted for reference.

**Dustmaker65** · 07-28-2016, 07:19 PM

Quote:

Originally Posted by Bennett68C10

Interested in one of the firewall sections under the heater box and up to the wiring gutter just above heater box. Some pics of where mine is rotted for reference.

Hi Kieth. One of the cabs has a perfect firewall... Just wasn't sure how to remove it in one piece. And how is the best way to ship?

Bennett68C10 · 07-28-2016, 07:14 PM

Also need some patches for the lower front windshield channel on both sides. Thanks.

Bennett68C10 · 07-28-2016, 07:29 PM

Jimmy, I probably only need about a 15x15 section of the firewall where the heater box is! A cutoff wheel or sawzall would make quick work of it if you don't mind cutting it up. I think ups or fed ex would be fine for shipping. On the lower window channels, I would need about a 8" section on each side of the cab where the factory seem is.

**Dustmaker65** · 07-28-2016, 07:50 PM

Don't mind cutting any of it up at this point. I just need to make sure I can ship the pieces. I only have one that has the bottom of the windshield intact. I will go get a couple pics.

Bennett68C10 · 07-29-2016, 06:29 AM

Quote:

Originally Posted by Dustmaker65

Don't mind cutting any of it up at this point. I just need to make sure I can ship the pieces. I only have one that has the bottom of the windshield intact. I will go get a couple pics.

Thanks Jimmy, let me know!

**gmc 2500 4x4** · 07-29-2016, 09:16 AM

what year and what do the gmc tags look like? i could use a bottom one

**Dustmaker65** · 07-29-2016, 09:26 AM

Quote:

Originally Posted by gmc 2500 4x4

what year and what do the gmc tags look like? i could use a bottom one

Not sure there are any on these cabs that I have left. I will check tonight when I get home and let you know.

Thanks!
Jimmy

**Dustmaker65** · 07-30-2016, 12:08 PM

Quote:

Originally Posted by gmc 2500 4x4

what year and what do the gmc tags look like? i could use a bottom one

PM sent. I may have one after all.

Jimmy

**gmc 2500 4x4** · 07-30-2016, 02:46 PM

Quote:

Originally Posted by Dustmaker65

PM sent. I may have one after all.

Jimmy

i didnt get a pm

**Dustmaker65** · 07-30-2016, 03:15 PM

Quote:

Originally Posted by gmc 2500 4x4

i didnt get a pm

Tried again... Will post a pic soon.

**Dustmaker65** · 07-31-2016, 10:19 AM

Quote:

Originally Posted by gmc 2500 4x4

i didnt get a pm

Here is pic of tag...

**gmc 2500 4x4** · 07-29-2016, 09:31 AM

thanx

michael bustamante · 07-29-2016, 12:28 PM

im thinking the floor about 8 inches in (towards the gas pedal) and all the way to the where the floor has that vertical hump under the bench seat right in front of the seat. if you have a cell that gets pics ill send you a pic of what im looking for.
505-907-6836

**Dustmaker65** · 07-29-2016, 01:01 PM

Quote:

Originally Posted by michael bustamante

im thinking the floor about 8 inches in (towards the gas pedal) and all the way to the where the floor has that vertical hump under the bench seat right in front of the seat. if you have a cell that gets pics ill send you a pic of what im looking for.
505-907-6836

Yep...text me at 309-231-4082

michael bustamante · 07-29-2016, 01:27 PM

ok ill do that when i get offa work

07-28-2016, 09:36 AM	#1
Dustmaker65 Senior Member Join Date: Jan 2015 Location: Marquette Heights, IL. Posts: 1,135	Cutting 3 cabs up... I am cutting 3 cabs up this weekend. There is no titles to these. There is lots of good metal left. One has a really nice firewall, I just don't know how to cut it out to be able to reuse it. So I will cut pieces out of too. I will get pics up later today or tomorrow. I also have a 1969 GMC LWB chassis that will get cut up to be hauled away... Thanks! Jimmy __________________ Jimmy Hoelzel

07-28-2016, 10:15 AM	#2
rlfletc Registered User Join Date: Jul 2016 Location: Linwood Posts: 6	Re: Cutting 3 cabs up... Looking for the jamb tag below the vin. Attached Images

07-28-2016, 05:58 PM	#4
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,160	Re: Cutting 3 cabs up... how's the floors?

07-28-2016, 06:11 PM	#6
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Cutting 3 cabs up... looking for good kick panals, both sides and the floor on the driver side foot area __________________ 1967custom

07-28-2016, 06:32 PM	#8
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Cutting 3 cabs up... wow is thst a hornets nest?? i need all that floor too thats in the pic all the way to the seat mount riser. you could just sawz all it all off in one piece __________________ 1967custom

07-28-2016, 07:11 PM	#10
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Cutting 3 cabs up... Interested in one of the firewall sections under the heater box and up to the wiring gutter just above heater box. Some pics of where mine is rotted for reference. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-28-2016, 07:14 PM	#12
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Cutting 3 cabs up... Also need some patches for the lower front windshield channel on both sides. Thanks. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-28-2016, 07:29 PM	#13
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Cutting 3 cabs up... Jimmy, I probably only need about a 15x15 section of the firewall where the heater box is! A cutoff wheel or sawzall would make quick work of it if you don't mind cutting it up. I think ups or fed ex would be fine for shipping. On the lower window channels, I would need about a 8" section on each side of the cab where the factory seem is. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-28-2016, 07:50 PM	#14
Dustmaker65 Senior Member Join Date: Jan 2015 Location: Marquette Heights, IL. Posts: 1,135	Re: Cutting 3 cabs up... Don't mind cutting any of it up at this point. I just need to make sure I can ship the pieces. I only have one that has the bottom of the windshield intact. I will go get a couple pics. __________________ Jimmy Hoelzel

07-29-2016, 09:16 AM	#16
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Cutting 3 cabs up... what year and what do the gmc tags look like? i could use a bottom one

07-29-2016, 09:31 AM	#22
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Cutting 3 cabs up... thanx

07-29-2016, 12:28 PM	#23
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Cutting 3 cabs up... im thinking the floor about 8 inches in (towards the gas pedal) and all the way to the where the floor has that vertical hump under the bench seat right in front of the seat. if you have a cell that gets pics ill send you a pic of what im looking for. 505-907-6836 __________________ 1967custom

07-29-2016, 01:27 PM	#25
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: Cutting 3 cabs up... ok ill do that when i get offa work __________________ 1967custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.