WA Parting out. '69 1/2 ton big block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 01-29-2017, 12:47 AM

I'm using the big block parts. Body is very, very rusty but still some good body cuts available such as bed floor, inner bedsides where they meet the floor and and taillight sections, cuts starting at $35. Seperate ads for grill at $225, bumper $100 and A/C system for $800. Let me know what you need...

**70STOVEBOLT** · 01-29-2017, 06:53 PM

What color is the interior? Looking for blue armrests.

hilltop55 · 01-29-2017, 08:23 PM

power steering box and a drag link?

carbuff382 · 01-29-2017, 08:45 PM

Quote:

Originally Posted by hilltop55

power steering box and a drag link?

If Randy500 doesn't have this let me know, I've got it.
Thanks,

hilltop55 · 01-29-2017, 08:59 PM

Carbuff382, I sent you a PM

*randy500* · 01-30-2017, 12:48 AM

Quote:

Originally Posted by hilltop55

power steering box and a drag link?

Drag link $40, steering box, $50 plus shipping on both.

m7vasque · 03-22-2017, 10:15 PM

Quote:

Originally Posted by randy500

Drag link $40, steering box, $50 plus shipping on both.

Center link still available? How much for it shipped to 92024

*randy500* · 01-30-2017, 12:47 AM

Quote:

Originally Posted by 70STOVEBOLT

What color is the interior? Looking for blue armrests.

Its black interior. Probably just some seatbelts are usable and unsure of the condition of those, driver retractor and cover seems usable, some rust on buckle insert tongue.

**Eagle9502** · 01-29-2017, 09:58 PM

Randy, do you have the engine out of this truck?

*randy500* · 01-30-2017, 12:54 AM

Quote:

Originally Posted by Eagle9502

Randy, do you have the engine out of this truck?

I do have the engine, its complete, like I said I am using the big block install parts such as frame stands, motor mounts, alternator and PS mounts.

The guy says the engine runs and I believe him, it appears he used a gas can to the fuel line and cut the purple wire to the starter to start it...that stuff is obvious from looking under the hood. Engine appears all original with still installed A/C compressor and factory AIR pump and lines. Carb is not correct but still has the TH400 kickdown switch that is correct on the carb for '69

It was last registered in 2008.

dave666693 · 01-30-2017, 10:48 AM

If you are selling the engine, how much?

*randy500* · 01-30-2017, 10:59 AM

Quote:

Originally Posted by dave666693

If you are selling the engine, how much?

I would sell that engine for $400, I am taking it out in between now and Sunday if you want to hear it run.

I will go ahead and get it started up today and see how it runs.

dave666693 · 02-01-2017, 08:42 PM

Quote:

Originally Posted by randy500

I would sell that engine for $400, I am taking it out in between now and Sunday if you want to hear it run.

I will go ahead and get it started up today and see how it runs.

did you get the engine started?

**Eagle9502** · 01-30-2017, 11:30 PM

I was going to ask about the exhaust manifolds but am looking for a set without the smog holes. Would you mind telling me the part numbers for the manifolds when you pull the motor?

*randy500* · 01-31-2017, 12:29 AM

Quote:

Originally Posted by Eagle9502

I was going to ask about the exhaust manifolds but am looking for a set without the smog holes. Would you mind telling me the part numbers for the manifolds when you pull the motor?

Sure, I will post the numbers if I can read them, driver side is cracked...

sherm6413 · 01-30-2017, 11:38 PM

Have a nice set of black visors in it? also pics and info on seatbelts ( which ones are there), thanks

*randy500* · 01-31-2017, 12:30 AM

Quote:

Originally Posted by sherm6413

Have a nice set of black visors in it? also pics and info on seatbelts ( which ones are there), thanks

Visors are the worst I have ever seen...will post pics of the belts tomorrow probably.

**70STOVEBOLT** · 01-31-2017, 11:44 AM

Randy, does it still have the dual exhaust hangers? If so can you get pics and a price shipped to 46562 please?

Thanks,
Mark

*randy500* · 01-31-2017, 04:11 PM

Quote:

Originally Posted by 70STOVEBOLT

Randy, does it still have the dual exhaust hangers? If so can you get pics and a price shipped to 46562 please?

Thanks,
Mark

The truck has the thin angle bracket hangers under the cab and the thin 45 degree angle brackets behind the tire on the frame on both sides. I think they will all fit in a small flat rate box, so $26 shipped if you want them. If that's the type you are looking for I will get some pics. The later model (71-2 at least) big block brackets are much heavier brackets.

**70STOVEBOLT** · 01-31-2017, 05:09 PM

Can you get pics of the exhaust hangers? I am unfamiliar with the differences. My truck is a '70 so these should work?

Thanks,
Mark

*randy500* · 01-31-2017, 09:24 PM

Quote:

Originally Posted by 70STOVEBOLT

Can you get pics of the exhaust hangers? I am unfamiliar with the differences. My truck is a '70 so these should work?

Thanks,
Mark

I took the pictures and will post them in a bit. I am thinking the exhaust brackets are the same to 71 and then heavier in 72. I took a picture of a 72 hanger for comparison.

TBohne · 01-31-2017, 08:00 PM

I need a cigarette lighter wire harness, is it any good? Pics if possible, thanks

*randy500* · 01-31-2017, 09:22 PM

Quote:

Originally Posted by TBohne

I need a cigarette lighter wire harness, is it any good? Pics if possible, thanks

I will look at that tomorrow and pull it if its there.

**Eagle9502** · 01-31-2017, 08:37 PM

I'll get in line for the exhaust hangers if 70Stovebolt passes.

*randy500* · 01-31-2017, 10:17 PM

Pics of the hangars the top ones are under the cab for a 72, RH side is on the right and the view your looking at is from the front of the truck, just look at one at a time to envision how they mount. Bottom left is under cab mount for 69-71 at least, that one is drivers side. Bottom right is above the axle hangar.

Sorry but I realized I need them for a truck I am building...I usually only build 72's is why I think I thought they were for sale.

I'm just posting the picture since I went out and took it and for future reference.

The bottom pictures are of the 69-71 tailpipe hangars.

01-29-2017, 12:47 AM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Parting out. '69 1/2 ton big block I'm using the big block parts. Body is very, very rusty but still some good body cuts available such as bed floor, inner bedsides where they meet the floor and and taillight sections, cuts starting at $35. Seperate ads for grill at $225, bumper $100 and A/C system for $800. Let me know what you need...

01-29-2017, 06:53 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: Parting out. '69 1/2 ton big block What color is the interior? Looking for blue armrests. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-29-2017, 08:23 PM	#3
hilltop55 Registered User Join Date: Feb 2012 Location: Somers Point NJ Posts: 95	Re: Parting out. '69 1/2 ton big block power steering box and a drag link?

01-29-2017, 08:59 PM	#5
hilltop55 Registered User Join Date: Feb 2012 Location: Somers Point NJ Posts: 95	Re: Parting out. '69 1/2 ton big block Carbuff382, I sent you a PM

01-29-2017, 09:58 PM	#9
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 830	Re: Parting out. '69 1/2 ton big block Randy, do you have the engine out of this truck?

01-30-2017, 10:48 AM	#11
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Parting out. '69 1/2 ton big block If you are selling the engine, how much? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

01-30-2017, 11:30 PM	#14
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 830	Re: Parting out. '69 1/2 ton big block I was going to ask about the exhaust manifolds but am looking for a set without the smog holes. Would you mind telling me the part numbers for the manifolds when you pull the motor?

01-30-2017, 11:38 PM	#16
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Re: Parting out. '69 1/2 ton big block Have a nice set of black visors in it? also pics and info on seatbelts ( which ones are there), thanks

01-31-2017, 11:44 AM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: Parting out. '69 1/2 ton big block Randy, does it still have the dual exhaust hangers? If so can you get pics and a price shipped to 46562 please? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-31-2017, 05:09 PM	#20
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,247	Re: Parting out. '69 1/2 ton big block Can you get pics of the exhaust hangers? I am unfamiliar with the differences. My truck is a '70 so these should work? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-31-2017, 08:00 PM	#22
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 296	Re: Parting out. '69 1/2 ton big block I need a cigarette lighter wire harness, is it any good? Pics if possible, thanks

01-31-2017, 08:37 PM	#24
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 830	Re: Parting out. '69 1/2 ton big block I'll get in line for the exhaust hangers if 70Stovebolt passes.

01-31-2017, 10:17 PM	#25
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting out. '69 1/2 ton big block Pics of the hangars the top ones are under the cab for a 72, RH side is on the right and the view your looking at is from the front of the truck, just look at one at a time to envision how they mount. Bottom left is under cab mount for 69-71 at least, that one is drivers side. Bottom right is above the axle hangar. Sorry but I realized I need them for a truck I am building...I usually only build 72's is why I think I thought they were for sale. I'm just posting the picture since I went out and took it and for future reference. The bottom pictures are of the 69-71 tailpipe hangars. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.