What this #2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

don t. - 72gmc · 08-04-2023, 07:20 AM

I need to R&R my broken antenna. Found some good threads on this site...TYVM.
Started looking at the truck, found cardboard in between the fender and inner panel. Same was found on the driver side as well.

Thanks again...Don.

**A1971Blazer** · 08-04-2023, 07:38 AM

front fender seal maybe?
Name: Screenshot (548)_InPixio.jpg
Views: 471
Size: 36.3 KB

bnorth · 08-04-2023, 12:02 PM

Fender seal for noise reduction. Only found on 72 full load trucks IIRC.

**GMCPaul** · 08-04-2023, 02:35 PM

That is the 1967-72 Front Fender Dust Shields Part # 998215

They are attached to small metal brackets by using brass staples. The brackets themselves are not reproduced only the dust shields. Ours include 3 pieces per side = 6 total pieces and the required brass staples that are needed to install them onto the original metal brackets. Found on the following page of our website
https://gmcpauls.com/rubber&ws1.htm
Paul Jr @ GMCPauls

**Steeveedee** · 08-04-2023, 02:40 PM

Aren't those provided with the CST option? My '70 has them. I'm going to go and look for those other items in A1971Blazer's picture.

**A1971Blazer** · 08-04-2023, 02:43 PM

Quote:

Originally Posted by Steeveedee

Aren't those provided with the CST option? My '70 has them. I'm going to go and look for those other items in A1971Blazer's picture.

That's from the LMC Truck website

**Richard** · 08-05-2023, 04:21 AM

Quote:

Originally Posted by Steeveedee

Aren't those provided with the CST option? My '70 has them. I'm going to go and look for those other items in A1971Blazer's picture.

Would be a real help to look at yours next time I see you if still intact.

**DA71Grande** · 08-05-2023, 06:56 AM

I have them on my 71 Grande

mr.mud1 · 08-05-2023, 07:58 AM

the inner fender shields are on my 72 Cheyenne Super,i replaced them as the first painter guy that did my truck,painted them the nicest shade of white??the repro's weren't great,had to finish assembling them and make staples but they're on and look ok.my truck as per the build sheet is,Fremont built Z84 Custom Sport Truck and YE9 Cheyenne Super.

**Steeveedee** · 08-05-2023, 09:04 AM

Quote:

Originally Posted by Richard

Would be a real help to look at yours next time I see you if still intact.

Soitenly! You know where I'll be at 4 PM today.

Woody · 08-05-2023, 09:44 AM

I would like to find a templet of the brackets so I could make me a set.

Woody

**Richard** · 08-05-2023, 04:18 AM

Quote:

Originally Posted by GMCPaul

That is the 1967-72 Front Fender Dust Shields Part # 998215

They are attached to small metal brackets by using brass staples. The brackets themselves are not reproduced only the dust shields. Ours include 3 pieces per side = 6 total pieces and the required brass staples that are needed to install them onto the original metal brackets. Found on the following page of our website
https://gmcpauls.com/rubber&ws1.htm
Paul Jr @ GMCPauls

Do you have any sort of assembly instructions? I cannot find them anywhere. Will purchase another set they are included.

**jocko** · 08-04-2023, 03:11 PM

I believe these are standard for Z84 and YE9 (i.e. CST/Cheyenne and Cheyenne Supers - assume same is true on equivalent GMC trim levels).
EDIT: would like to confirm whether these were on Z84 in all years - or does anyone have these on a 71+ Z84 Cheyenne?

**Rich72C10** · 08-05-2023, 12:48 PM

A reminder to get mine on. It seems when my 72 Cheyenne went through it's work from the previous owner they did not put these back on and it annoys me.

I bought a set off the forums awhile back but the seals (felt?) need to be replaced. Which that doesn't look like fun. But my biggest problem (for me) is that I am pretty sure you need to remove the fenders and then everything else to get them off... thus the parts are in my attic - aka deep storage!

I am interested in updated information when someone replaces their seals onto the brackets. Heck I'd love to see a video on that and then getting them installed properly!

**Rich72C10** · 08-06-2023, 01:31 PM

While looking for something else, I found this in the Chevy 67-72 assembly manual.

Though I am not to sure what that "spacer" is about near the top of the seal (item 3).

**Rich72C10** · 08-10-2023, 11:06 AM

Hey Greg,

Having the photo's you have wouldn't hurt that's for sure - no reason to be sorry about not having more photos. As for the "spacer collar" going into the seal hole - that makes perfect sense to me. I am now convinced that is how it worked with the spacers.

I have now pretty much convinced myself that I only have one original screw - the one that had the rusted collar on it. Thinking about it how I had to pull it off it was: Screw, Spacer, Seal, and a broken bit of the pillar keeping it all rusted together.

Casper42 · 08-04-2023, 03:13 PM

Quote:

Originally Posted by jocko

or does anyone have these on a 71+ Z84 Cheyenne?

I have on my '72 Cheyenne. Like others mentioned this was included in that extra sound deadening for Cheyenne/Super...perhaps the CST had them.

**tim71** · 08-04-2023, 03:29 PM

I can vouch that the aftermarket replacements are junk.

**Getter-Done** · 08-04-2023, 03:31 PM

I bought a 69 CST parts truck and they were on it.

**FirstOwner69** · 08-05-2023, 12:20 AM

My '69 CST/20 has them.

08-04-2023, 07:20 AM	#1
don t. - 72gmc Registered User Join Date: Dec 2001 Location: harvard, il. USA Posts: 389	What this #2 I need to R&R my broken antenna. Found some good threads on this site...TYVM. Started looking at the truck, found cardboard in between the fender and inner panel. Same was found on the driver side as well. Thanks again...Don.

08-04-2023, 12:02 PM	#3
bnorth Registered User Join Date: Aug 2020 Location: Salmon Arm BC Posts: 149	Re: What this #2 Fender seal for noise reduction. Only found on 72 full load trucks IIRC. __________________ 1970 C10 l/b 292/4spd Build: http://67-72chevytrucks.com/vboard/s...d.php?t=811062

08-04-2023, 02:35 PM	#4
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	Re: What this #2 That is the 1967-72 Front Fender Dust Shields Part # 998215 They are attached to small metal brackets by using brass staples. The brackets themselves are not reproduced only the dust shields. Ours include 3 pieces per side = 6 total pieces and the required brass staples that are needed to install them onto the original metal brackets. Found on the following page of our website https://gmcpauls.com/rubber&ws1.htm Paul Jr @ GMCPauls __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

08-04-2023, 02:40 PM	#5
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,242	Re: What this #2 Aren't those provided with the CST option? My '70 has them. I'm going to go and look for those other items in A1971Blazer's picture. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

08-05-2023, 06:56 AM	#8
DA71Grande Senior Member Join Date: Aug 2018 Location: Liberty Twp, Ohio Posts: 337	Re: What this #2 I have them on my 71 Grande __________________ Doug 71 Sierra Grande C25 16 Sierra 2500HD All Terrain 23 Chevy Tahoe Z71 https://paypal.me/digdug7131?locale.x=en_US

08-04-2023, 07:38 AM	#2
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,121	Re: What this #2 front fender seal maybe? __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

08-05-2023, 07:58 AM	#9
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,598	Re: What this #2 the inner fender shields are on my 72 Cheyenne Super,i replaced them as the first painter guy that did my truck,painted them the nicest shade of white??the repro's weren't great,had to finish assembling them and make staples but they're on and look ok.my truck as per the build sheet is,Fremont built Z84 Custom Sport Truck and YE9 Cheyenne Super.

08-05-2023, 09:44 AM	#11
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Re: What this #2 I would like to find a templet of the brackets so I could make me a set. Woody

08-04-2023, 03:11 PM	#13
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,938	Re: What this #2 I believe these are standard for Z84 and YE9 (i.e. CST/Cheyenne and Cheyenne Supers - assume same is true on equivalent GMC trim levels). EDIT: would like to confirm whether these were on Z84 in all years - or does anyone have these on a 71+ Z84 Cheyenne? Last edited by jocko; 08-04-2023 at 04:21 PM.

08-05-2023, 12:48 PM	#14
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,646	Re: What this #2 A reminder to get mine on. It seems when my 72 Cheyenne went through it's work from the previous owner they did not put these back on and it annoys me. I bought a set off the forums awhile back but the seals (felt?) need to be replaced. Which that doesn't look like fun. But my biggest problem (for me) is that I am pretty sure you need to remove the fenders and then everything else to get them off... thus the parts are in my attic - aka deep storage! I am interested in updated information when someone replaces their seals onto the brackets. Heck I'd love to see a video on that and then getting them installed properly! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-06-2023, 01:31 PM	#15
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,646	Re: What this #2 While looking for something else, I found this in the Chevy 67-72 assembly manual. Though I am not to sure what that "spacer" is about near the top of the seal (item 3). Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-10-2023, 11:06 AM	#16
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,646	Re: What this #2 Hey Greg, Having the photo's you have wouldn't hurt that's for sure - no reason to be sorry about not having more photos. As for the "spacer collar" going into the seal hole - that makes perfect sense to me. I am now convinced that is how it worked with the spacers. I have now pretty much convinced myself that I only have one original screw - the one that had the rusted collar on it. Thinking about it how I had to pull it off it was: Screw, Spacer, Seal, and a broken bit of the pillar keeping it all rusted together. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-04-2023, 03:29 PM	#18
tim71 Senior Member Join Date: Oct 2015 Location: Brownsburg, IN Posts: 1,083	Re: What this #2 I can vouch that the aftermarket replacements are junk. __________________ 1972 Blazer Highlander 1971 GMC K1500 SWB (sold) 2004 Corvette Z06 CE

08-04-2023, 03:31 PM	#19
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,885	Re: What this #2 I bought a 69 CST parts truck and they were on it. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

08-05-2023, 12:20 AM	#20
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,841	Re: What this #2 My '69 CST/20 has them. __________________ Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.