Short Step Bed Parts F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*dtlilly* · 02-14-2004, 02:32 AM

I took apart the short step bed that was on the 71 GMC. The step boards are in good shape needing only minor work to be perfect. The bed strips have minor surface rust and slight bends. The bed supports only have surface rust. Rear support has minor bend on pass side, only surface rust. Driver bed side is straight, has rust on the inside flange near the front, Pass bed side is straight, clean. The bed had diamond plate welded to the sides on top of wood and strips, that's why it was so clean underneath. I had to use a torch to 2 welds on drivers side and one on passenger side.

Driver side step board and support $25.00
Pass side step board and support $25.00
Seven (7) bed metal strips $20.00
Four (4) bed cross supports $60.00
Rear support under tailgate $20.00
Driver side bed side $30.00
Pass side bed side $40.00

All prices do not include shipping. Request pics and details if interested. Thanks, Don.

*** *** NEW PRICE: $60.00 FOR IT ALL!! *** ***

dmec · 02-14-2004, 04:36 AM

would like to see pics of steps and supports. thanks Larry

*dtlilly* · 02-14-2004, 11:21 AM

I'm sorry, I forgot to mention, anyone interested in pics, give me your e-mail addy, and I will send them...to lazy to resize

krue · 02-14-2004, 11:26 AM

Don, I need pics of the tailgate! Pm'd you for pics.

*dtlilly* · 02-14-2004, 08:45 PM

Krue, pics sent to e-mail.

Larry...

krue · 02-14-2004, 10:54 PM

I want the tailgate!
PM sent about details.

Thanks, Krue

*dtlilly* · 02-15-2004, 12:47 AM

PM back at ya Krue.

Anyone that wants anything here has until Sunday late AM, or I'm listing the parts on ebay. I thought I'd offer to the family first, I'll accept offers/trades.

FirstGen · 02-15-2004, 12:48 AM

Would like to see pics of the bed sides, both sides please.
Thanks!
unlimitedlandscape@hotmail.com

*dtlilly* · 02-15-2004, 01:21 AM

Here's a pic of the passenger side inside of the bed. Real clean and straight, no rust, no bows. Bed was powder blasted with aluminum oxide and then etching primered. I had to use red oxide primer in areas that were starting to survase rust.

FirstGen · 02-15-2004, 01:35 AM

that;s not rust toward the top of the picture? Would it be possible to ship both sides if the other side is nice also?

Thanks again,
Taylor

*dtlilly* · 02-15-2004, 01:39 AM

Here's the inside of the drivers side. Please note there is rust holes on the lip that the wood boards mount to near the front part, also there is a slight burn area from where I had to torch one of the welds that held the plate metal floor that had been installed. Other than that, no bends, no bows, very straight. Was powder blasted with aluminum oxide then etching primered. Again, I had to use red primer to cover surface rust only.

*dtlilly* · 02-15-2004, 01:49 AM

Driver side outside. No rust, no bends, no bows. Aluminum oxide blasted and etching primered. Top rail real straight and clean, just a few drill holes from a side rail to fill.

*dtlilly* · 02-15-2004, 02:02 AM

Passenger side outside. As you can see very straight and clean. No rust, no bends, no bows, straight top rail, just several drill holes from a side rail to fill. Aluminum oxide blasted and etching primered.

FirstGen · 02-15-2004, 02:15 AM

looks good to me. Anyway to ship those?
Thanks

*dtlilly* · 02-15-2004, 02:27 AM

You asked about the first pic. That is where I had no cut a weld off from where there was a diamond plate steel plate welded to the floor. I tried to break all the welds, but on one this side and two on the other side wouldn't break.

I'll check about shipping through Grey Hound Bus lines. I assume it would be cheapest to ship these.

FirstGen · 02-15-2004, 02:36 AM

Yeah check it out if you don't mind to the Richardson,TX station. I'm very interested if the shipping isn't insane. If it is, there is a slight possibility a buddy would be able to pick them up for me in the next month or so.
LMK!!!
Thanks for your time.

**PICKMUP** · 02-16-2004, 12:28 AM

Still available? Any rust through? bondo? Damage? Thanks.

*dtlilly* · 02-16-2004, 03:39 AM

PM sent.

*dtlilly* · 03-16-2004, 04:45 PM

NEW PRICE NEW PRICE NEW PRICE

I will take $60.00 for it all, buyer pays all shipping costs or picks up the parts here in Memphis TN. Parts must be gone by March 25th. I accept paypal at drum_prayer@yahoo.com, or Postal Money Orders.

spencra · 03-16-2004, 06:26 PM

Are the steps still available? What is the overall condition of them?
I wouldn't mind buying the whole package but I think that the shipping would kill me.

*dtlilly* · 03-17-2004, 02:25 PM

The steps are still here with everything else. The condition of them is they each have a small stress crack at the 90 degree bend. The primered one has a small area that had to be filled because of a over zealous oxide blaster. The supports are in good shape.

I prefer to sell as a lot, but Spencra has first dibs on the steps if I end up selling seperate.

spencra · 03-17-2004, 03:26 PM

I'm sure that somebody will buy the lot. That is a really good deal. I would certainly buy it all if I could pick it up. I know that there are lots of board members in that area, where are you guys?

Chevyguy111786 · 03-17-2004, 06:41 PM

i'd buy the whole lot if shipping wouldn't kill me. but i think it would....

Rosa5759 · 03-17-2004, 07:22 PM

Could you check on shipping the steps and supports to 73132. I f shipping isn't to expensive, I want them.

*dtlilly* · 03-19-2004, 01:07 PM

Larry (spencra) your PM box is full.

If you look at the top of the white step, you can see the small repairable crack. I'll try to get more pics this weekend.

02-14-2004, 02:32 AM	#1
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Short Step Bed Parts F/S I took apart the short step bed that was on the 71 GMC. The step boards are in good shape needing only minor work to be perfect. The bed strips have minor surface rust and slight bends. The bed supports only have surface rust. Rear support has minor bend on pass side, only surface rust. Driver bed side is straight, has rust on the inside flange near the front, Pass bed side is straight, clean. The bed had diamond plate welded to the sides on top of wood and strips, that's why it was so clean underneath. I had to use a torch to 2 welds on drivers side and one on passenger side. Driver side step board and support $25.00 Pass side step board and support $25.00 Seven (7) bed metal strips $20.00 Four (4) bed cross supports $60.00 Rear support under tailgate $20.00 Driver side bed side $30.00 Pass side bed side $40.00 All prices do not include shipping. Request pics and details if interested. Thanks, Don. * * NEW PRICE: $60.00 FOR IT ALL!! * * Last edited by dtlilly; 03-16-2004 at 04:40 PM.

02-14-2004, 04:36 AM	#2
dmec Senior Member Join Date: Jun 2000 Location: yucaipa ca Posts: 580	steps and supports would like to see pics of steps and supports. thanks Larry

02-14-2004, 11:26 AM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Don, I need pics of the tailgate! Pm'd you for pics. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-14-2004, 08:45 PM	#5
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Krue, pics sent to e-mail. Larry... Attached Images

02-14-2004, 10:54 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	I want the tailgate! PM sent about details. Thanks, Krue __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-14-2004, 11:21 AM	#3
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I'm sorry, I forgot to mention, anyone interested in pics, give me your e-mail addy, and I will send them...to lazy to resize

02-15-2004, 12:47 AM	#7
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	PM back at ya Krue. Anyone that wants anything here has until Sunday late AM, or I'm listing the parts on ebay. I thought I'd offer to the family first, I'll accept offers/trades.

02-15-2004, 12:48 AM	#8
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Would like to see pics of the bed sides, both sides please. Thanks! unlimitedlandscape@hotmail.com __________________ 1968 C10 build in process TT LSA/6L90e/9" Last edited by FirstGen; 02-15-2004 at 12:51 AM.

02-15-2004, 01:21 AM	#9
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Here's a pic of the passenger side inside of the bed. Real clean and straight, no rust, no bows. Bed was powder blasted with aluminum oxide and then etching primered. I had to use red oxide primer in areas that were starting to survase rust. Attached Images Last edited by dtlilly; 02-15-2004 at 01:25 AM.

02-15-2004, 01:35 AM	#10
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	that;s not rust toward the top of the picture? Would it be possible to ship both sides if the other side is nice also? Thanks again, Taylor __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-15-2004, 01:39 AM	#11
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Here's the inside of the drivers side. Please note there is rust holes on the lip that the wood boards mount to near the front part, also there is a slight burn area from where I had to torch one of the welds that held the plate metal floor that had been installed. Other than that, no bends, no bows, very straight. Was powder blasted with aluminum oxide then etching primered. Again, I had to use red primer to cover surface rust only. Attached Images

02-15-2004, 01:49 AM	#12
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Driver side outside. No rust, no bends, no bows. Aluminum oxide blasted and etching primered. Top rail real straight and clean, just a few drill holes from a side rail to fill. Attached Images

02-15-2004, 02:02 AM	#13
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Passenger side outside. As you can see very straight and clean. No rust, no bends, no bows, straight top rail, just several drill holes from a side rail to fill. Aluminum oxide blasted and etching primered. Attached Images

02-15-2004, 02:15 AM	#14
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	looks good to me. Anyway to ship those? Thanks __________________ 1968 C10 build in process TT LSA/6L90e/9" Last edited by FirstGen; 02-15-2004 at 02:18 AM.

02-15-2004, 02:27 AM	#15
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	You asked about the first pic. That is where I had no cut a weld off from where there was a diamond plate steel plate welded to the floor. I tried to break all the welds, but on one this side and two on the other side wouldn't break. I'll check about shipping through Grey Hound Bus lines. I assume it would be cheapest to ship these. Last edited by dtlilly; 02-15-2004 at 07:33 AM.



Register or Log In To remove these advertisements.

02-15-2004, 02:36 AM	#16
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Yeah check it out if you don't mind to the Richardson,TX station. I'm very interested if the shipping isn't insane. If it is, there is a slight possibility a buddy would be able to pick them up for me in the next month or so. LMK!!! Thanks for your time. __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-16-2004, 12:28 AM	#17
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Steps? Still available? Any rust through? bondo? Damage? Thanks. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

02-16-2004, 03:39 AM	#18
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	PM sent.

03-16-2004, 04:45 PM	#19
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	NEW Price NEW PRICE NEW PRICE NEW PRICE I will take $60.00 for it all, buyer pays all shipping costs or picks up the parts here in Memphis TN. Parts must be gone by March 25th. I accept paypal at drum_prayer@yahoo.com, or Postal Money Orders.

03-16-2004, 06:26 PM	#20
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Are the steps still available? What is the overall condition of them? I wouldn't mind buying the whole package but I think that the shipping would kill me. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course) Last edited by spencra; 03-16-2004 at 06:28 PM.

03-17-2004, 02:25 PM	#21
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	The steps are still here with everything else. The condition of them is they each have a small stress crack at the 90 degree bend. The primered one has a small area that had to be filled because of a over zealous oxide blaster. The supports are in good shape. I prefer to sell as a lot, but Spencra has first dibs on the steps if I end up selling seperate.

03-17-2004, 03:26 PM	#22
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I'm sure that somebody will buy the lot. That is a really good deal. I would certainly buy it all if I could pick it up. I know that there are lots of board members in that area, where are you guys? __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

03-17-2004, 06:41 PM	#23
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	i'd buy the whole lot if shipping wouldn't kill me. but i think it would....

03-17-2004, 07:22 PM	#24
Rosa5759 Registered User Join Date: Feb 2004 Location: Oklahoma Posts: 3	Could you check on shipping the steps and supports to 73132. I f shipping isn't to expensive, I want them.

03-19-2004, 01:07 PM	#25
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Larry (spencra) your PM box is full. If you look at the top of the white step, you can see the small repairable crack. I'll try to get more pics this weekend.

Register or Log In To remove these advertisements.