Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-11-2002, 09:50 PM | #1 |
Registered User
Join Date: Oct 2001
Location: Southern New Mexico
Posts: 649
|
Wipers Are Kinda Slow. Can I Lube The Motor?
Was wondering if I can lube the wiper motor or something to make them move a bit eaiser?
Any suggestions? Thanks Eric |
04-12-2002, 12:53 AM | #2 |
Registered User
Join Date: Nov 2001
Location: sparks, NV
Posts: 1,141
|
I had the same problem on my 68, I ended up replacing the wiper motor.
------------------ 67 3/4 ton progect 68 chevy swb stepside Sparks NV
__________________
68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada |
04-12-2002, 04:01 AM | #3 |
Registered User
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
|
lub the pivots the best u can with some wd or some spay lub
------------------ 67 stepside 4x4 Owensville MO mudder67@hotmail.com |
04-12-2002, 05:56 AM | #4 |
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Odds are the motor is going. You should lube all the pivot points anyway so give that a try first.
------------------ 63 Impala*66 Chevelle SS*69 Chevelle*69 C10 Stepside*71 Cheyenne 20*72 Chevelle Parts for sale: http://www.angelfire.com/trek/mr409/items4sale.html
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
04-12-2002, 09:29 AM | #5 |
Weapons Of Construction
Join Date: Apr 2000
Location: Colorado, USA
Posts: 1,095
|
Mine was really slow. I found the previous moron had put foil on the fuse and reinstalled it. I replaced it with the correct fuse and it seems to run a little faster. Still slower than newer truck though. You might want to just put a new fuse in and see if that helps.
For the oil on pivots, I would suggest something thicker than wd40, although wd40 is better than not oiling it at all.
__________________
1971 GMC 2500, 402/TH400 4.10 Daily Driver Lafayette, CO |
Bookmarks |
|
|