Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-28-2010, 07:19 PM | #1 |
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
Can't get radio to work...
I am trying to install this aftermarket radio but i am getting no power in the harness. The original radio also didn't work. Anyone have a wiring diagram of the radio circuit for a gmc 1992 c1500?
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd |
03-28-2010, 07:26 PM | #2 |
Chris
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
|
Re: Can't get radio to work...
I got one in my hayes manual i think if I can scan it and post a pic but I'd check fuses, maybe ones blown, and if not you need a test light to check for constant and switched power and then a ground, if nothing else run your own. You can run them out to the firewall and use the junction block under the plastic relay cover for a constant hot and a ground there for ground, or go straight to the battery, then all you need is a switched hot. You could find it in the fuse box or tap into something in the dash maybe.
turned out kinda small but maybe it'll work for ya...
__________________
Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 Last edited by benoit454; 03-28-2010 at 07:37 PM. |
03-28-2010, 08:30 PM | #3 |
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
Re: Can't get radio to work...
Thanks for that. The courtesy fuse was blown... radio now works..on to the next problem...
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd |
03-28-2010, 10:02 PM | #4 |
Chris
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
|
Re: Can't get radio to work...
been there done that, mine was the exact same way, kept blowing the fuse and junk.
__________________
Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 |
Bookmarks |
|
|