The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-01-2010, 08:33 PM   #1
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Newtz '67 swb

This was my dad's work truck. I started working on it when I was 15, and eventually bought it from him. I rebuilt the 350 he had in it, bought a TCI 400 trans from summit, heated the coil springs to lower it (haha), and had it painted. This truck was my hot rod all through high school, then I sold it. Of course I kicked myself in the ass for it, so when a friend told me he had seen it for sale, I went and bought it back, with power steering,new brakes, and a few dents added. Then I had an engine fire, and it just sat for the next 7 yrs. Now I'm building a big block for it, and have plans to bag it. Nothing too crazy, but I want to do things right this time around. Here are a few pics of what it looked like 10 yrs. ago, and how the new engine looks now.
Attached Images
    
Newtz67 is offline   Reply With Quote
Old 04-01-2010, 08:37 PM   #2
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

A few pics of where the new engine is at right now.
Attached Images
     
Newtz67 is offline   Reply With Quote
Old 04-01-2010, 08:43 PM   #3
big_al_71
Registered User
 
big_al_71's Avatar
 
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
Re: Newtz '67 swb

is funny my son found his 96 1500 we sold a couple of years back and he called me asking me if we should buy back I told him that once I sell something is like breaking up with a G/F or divorcing the wife we are done with it.
Looks like you have a serious motor going in it good luck....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!.



Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild
big_al_71 is offline   Reply With Quote
Old 04-01-2010, 08:58 PM   #4
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Haha! Thanks. That's a very clean '71 you've got there by the way. Nice!

Last edited by Newtz67; 04-01-2010 at 09:01 PM.
Newtz67 is offline   Reply With Quote
Old 04-01-2010, 09:14 PM   #5
big_al_71
Registered User
 
big_al_71's Avatar
 
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
Re: Newtz '67 swb

Quote:
Originally Posted by Newtz67 View Post
Haha! Thanks. That's a very clean '71 you've got there by the way. Nice!
thanks!!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!.



Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild
big_al_71 is offline   Reply With Quote
Old 04-01-2010, 09:22 PM   #6
hayhauler71
Registered User
 
hayhauler71's Avatar
 
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
Re: Newtz '67 swb

That engine looks great, should move that truck down the road pretty good, good luck on your restoration and welcome to the board.
hayhauler71 is offline   Reply With Quote
Old 04-01-2010, 09:30 PM   #7
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Quote:
Originally Posted by hayhauler71 View Post
That engine looks great, should move that truck down the road pretty good, good luck on your restoration and welcome to the board.
Thanks alot! It's so good to see that so many of these trucks are still alive and well!
Newtz67 is offline   Reply With Quote
Old 04-01-2010, 09:33 PM   #8
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Newtz '67 swb

cool story, cool truck and sweet engine!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 04-01-2010, 11:17 PM   #9
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Before my account was activated, I saw a thread with the first couple pics being a truck with the bed off, and some fat drag radials on the back wheels.Later in the thread he changed to 20"s. I really wanted to ask the owner some questions, but can not find the thread now for the life of me. Any help would be greatly appreciated! I think the cab was green, but not 100% on that. Thanks!
Newtz67 is offline   Reply With Quote
Old 04-04-2010, 02:04 PM   #10
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Ordered some more parts for my motor last night, so I should have some new pics up soon! Can't wait to start it up!
Newtz67 is offline   Reply With Quote
Old 04-04-2010, 02:20 PM   #11
72swb_327stroker_?
knuckle buster..
 
72swb_327stroker_?'s Avatar
 
Join Date: Oct 2007
Location: Frisco
Posts: 613
Re: Newtz '67 swb

Lookin good! Your truck is sweeeeeet!

That thang is gonna be badassss when its done!
__________________
_______________________________________________________________________________
Eric

THIS SITE ROCKS!!!

Check out my suburban on 20's with fresh paint!
Click here to support the site
Check out the Member Photo Gallery here
StreetCruizin
FAQ thread
Site vendors list (scroll down to vendors in red)
join the the smilies fight club
72swb_327stroker_? is offline   Reply With Quote
Old 04-04-2010, 03:16 PM   #12
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Quote:
Originally Posted by 72swb_327stroker_? View Post
Lookin good! Your truck is sweeeeeet!

That thang is gonna be badassss when its done!
Thanks! Your burb looks great, I really wanna get one someday! Can't get a cooler family cruiser than that!
Newtz67 is offline   Reply With Quote
Old 04-04-2010, 10:49 PM   #13
seafoam68
Senior Member
 
seafoam68's Avatar
 
Join Date: Oct 2009
Location: Chattanooga, TN
Posts: 259
Re: Newtz '67 swb

Welcome aboard! You will find this website invaluable for info. I am wandering if you could provide me with a few specs on your engine. I am currently building a 454 and was kind of using the old LS-7 crate motor for a guide. What pistons and heads are you using? ect.,ect. Thanks and good luck....
seafoam68 is offline   Reply With Quote
Old 04-05-2010, 07:20 PM   #14
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Quote:
Originally Posted by seafoam68 View Post
Welcome aboard! You will find this website invaluable for info. I am wandering if you could provide me with a few specs on your engine. I am currently building a 454 and was kind of using the old LS-7 crate motor for a guide. What pistons and heads are you using? ect.,ect. Thanks and good luck....
This is my first big block, so I'm kinda using a motor that Edelbrock built as a guide. Pistons are Sealed Power, heads are cast iron 049 heads that have been rebuilt. Compression ratio should be around 10.25:1. Cam, and intake are Edelbrock performer rpm. Carb is Edelbrock 750. Only difference between mine and Edelbrocks is the heads. They used Edelbrock performer rpm heads. At almost $2,000 for a set, those will come a little later. haha. Their motor put out 533 hp. Nothin too crazy, but it should be fun! Thanks for the welcome, by the way!

Last edited by Newtz67; 04-05-2010 at 07:22 PM.
Newtz67 is offline   Reply With Quote
Old 04-10-2010, 02:23 PM   #15
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

I have a question. I haven't really researched it yet, but I was wondering if my 454 will work on my small block motor mounts or if I need to get different mounts for the big block. This is for the '67. Thanks for any info!
Newtz67 is offline   Reply With Quote
Old 04-10-2010, 03:42 PM   #16
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Some new parts that are going on tonight!
Attached Images
 
Newtz67 is offline   Reply With Quote
Old 04-13-2010, 08:38 AM   #17
GKsport67
Registered User
 
GKsport67's Avatar
 
Join Date: Jan 2008
Location: Atlanta,Ga
Posts: 660
Thumbs up Re: Newtz '67 swb

You was fly 10 years ago & today you still have that option... I LOVE THESE TRUCKS!!!

10 years ago i was heatn springs on my first Chevy a 78 Monte Carlo with 15x8 5 star Centerlines with 205/50/15's(real low)

Old Skool Kool!!
GKsport67 is offline   Reply With Quote
Old 04-20-2010, 08:29 AM   #18
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: Newtz '67 swb

Quote:
Originally Posted by Newtz67 View Post
I have a question. I haven't really researched it yet, but I was wondering if my 454 will work on my small block motor mounts or if I need to get different mounts for the big block. This is for the '67. Thanks for any info!

You will need new mounts. Check performance online. They sell a pretty nice set of stands & mounts. I think they are 129.00. I would move the motor back as far as possible if you want it to hook. Moving the motor back will help with weight transfer.


welcome to the board!
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-20-2010, 01:34 PM   #19
seafoam68
Senior Member
 
seafoam68's Avatar
 
Join Date: Oct 2009
Location: Chattanooga, TN
Posts: 259
Re: Newtz '67 swb

Hey Newtz, been away for a while and just saw your mount question. On mine, I went with a donor set of frame mounts from an '81 model that had a big block, and a set of solid mounts. (The pic shows the rubber mounts). I just had to drill one hole on each side, and this was much cheaper than aftermarket mounts.
Attached Images
 
seafoam68 is offline   Reply With Quote
Old 04-20-2010, 02:31 PM   #20
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: Newtz '67 swb

Those might be cheaper if you have a pullapart or something like that but most guys want more for the stock than the aftermarket. The aftermarket switches you to a car type mount so you can run solid mounts if you want. I would think you would have less clearance problems with the aftermarket since they are tubular.
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-21-2010, 12:15 AM   #21
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Thanks guys for the response on the motor mounts! I really appreciate the help! I'll let you know what I decide to go with, and include pics.

BTW, Djracer, I'm a big fan of pass time and your truck! That thing is fast, and hooks like crazy!

Last edited by Newtz67; 04-21-2010 at 12:17 AM.
Newtz67 is offline   Reply With Quote
Old 04-21-2010, 12:39 AM   #22
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

So I checked out performance online. Is the kit the same for big block and small block? I didn't see a kit specifically for big block.
Newtz67 is offline   Reply With Quote
Old 04-21-2010, 07:20 AM   #23
djracer
Registered User
 
djracer's Avatar
 
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
Re: Newtz '67 swb

they just say v8 but they will work with a big block.

http://www.performanceonline.com/sto...cat=455&page=1

Check out this thread for some pics. He swapped to solid motor mounts but you can't see them in the pics.

http://67-72chevytrucks.com/vboard/s...d.php?t=392716
__________________
Kevin

Special Thanks to All who have helped on the TRUCK!

My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4

So Far my best Times are:

Motor only:
6.44 1/8 @ 104.13
10.39 1/4 @ 125.83

Nitrous Times:
5.785 1/8 @ 118.65 with a 1.336 60ft
9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!
djracer is offline   Reply With Quote
Old 04-21-2010, 01:12 PM   #24
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

Quote:
Originally Posted by djracer View Post
they just say v8 but they will work with a big block.

http://www.performanceonline.com/sto...cat=455&page=1

Check out this thread for some pics. He swapped to solid motor mounts but you can't see them in the pics.

http://67-72chevytrucks.com/vboard/s...d.php?t=392716
Perfect, those are the ones I was looking at. Thanks again for your help!
Newtz67 is offline   Reply With Quote
Old 04-24-2010, 02:47 PM   #25
Newtz67
Registered User
 
Newtz67's Avatar
 
Join Date: Mar 2010
Location: A t w a t e r, Ca
Posts: 1,201
Re: Newtz '67 swb

I have another question, I'm having a hell of a time finding headers for the 454. I want 1 7/8" primary tubes minimum. I would prefer 2 1/8" primary tubes with 3" to 3 !/2" collectors. I'm just not sure what will fit in the '67. Thanks again for any help!
Newtz67 is offline   Reply With Quote
Reply

Bookmarks

Tags
'67, big block chevy, fleetside, swb


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com