Harbor Freight Air tools

[smiley68]

Hey all,
I was wondering if anyone has any info on this brand of air tools. I'm on a strict budget and was wondering if this would be a good starter kit. See below.

Thanks,
Smiley

It is a Central Pneumatic
48 PC. PNEUMATIC TOOL KIT
Five must-have air tools plus accessories for one low price! Kit includes everything you need to get down to work. Includes spring retainer, two wrenches, hex wrench, extension bar, drill chuck key, adapter.
Five tools: sander, die grinder, air hammer, impact wrench, reversible drill
10 pc. socket set
10 pc. stone set
5 pc. air fittings
4 pc. drill bits
4 pc. chisels
Specifications:

150MM Air Hammer
Air consumption: 18 SCFM
Air requirement: 90 PSI
Impacts: 4500 BPM
Air inlet: 1/4''-18 NPT
Dimensions: 6''L x 2''W x 6-1/8''H
1/4'' Air Die Grinder
Safety trigger, rear exhaust, regulator
Collet: 1/4''
Air consumption: 26 SCFM
Air requirement: 90 PSI
Maximum speed: 23,000 RPM
Air inlet: 1/4''-18 NPT
Dimensions: 6-3/4''L x 2-3/8''W
3/8'' Reversible Drill
Air consumption: 25 SCFM
Air requirement: 90 PSI
Maximum speed: 1950 RPM (clockwise), 2000 RPM (counter clockwise)
Air inlet: 1/4''-18 NPT
Dimensions: 7-1/2''L x 1-5/8''W x 6-1/8''H
1/2'' Impact Wrench
Air consumption: 26 SCFM
Air requirement: 90 PSI
Maximum speed: 7000 RPM
Maximum torque: 230 ft. lbs.
Blows per minute: 550
Air inlet: 1/4''-18 NPT
Dimensions: 7''L x 2-3/4''W x 7-3/4''H
Sander
Air consumption: 21 SCFM
Air requirement: 90 PSI
Maximum speed: 10,000 RPM
Air inlet: 1/4''-18 NPT
Dimensions: 8-5/8''L x 2-3/4''W x 5-3/8''H



ITEM 46446-5VGA

$149.99