Air intake kits - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevinr1970 · 02-06-2007, 02:30 PM

I bought a Fram Boost air intake kit and installed it on my truck Sunday morning.
I notice that when it is idling in nuetral if I tap the gas ever so slightly it takes a split second for it to respond. Before it started revving imediately.
It also seems to stumble ever so slightly at the beginning of the rpm range.
I checked all my connections to make sure there was no leaks and all the hose clamps are tight.
Do I need to get it reprogrammed to compensate for the air intake kit? Should I need to have it reprogrammed?
Any ideas?

02-06-2007, 02:30 PM	#1
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Air intake kits I bought a Fram Boost air intake kit and installed it on my truck Sunday morning. I notice that when it is idling in nuetral if I tap the gas ever so slightly it takes a split second for it to respond. Before it started revving imediately. It also seems to stumble ever so slightly at the beginning of the rpm range. I checked all my connections to make sure there was no leaks and all the hose clamps are tight. Do I need to get it reprogrammed to compensate for the air intake kit? Should I need to have it reprogrammed? Any ideas? __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.