Outlet fittings for 3/4 ton Master cyl... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Southpa · 03-23-2002, 07:09 PM

Are they the same size as those of the 1/2 ton master cyl? I'm thinking about getting rid of this leaky 1/2 ton master w/ the single hold-down clip for a 3/4 ton master (2 hold-downs) seeing as how I already have a 3/4 ton booster. And I don't want to have to re-fabricate the lines going to the prop. valve. Going to buy NEW this time and it will be closely inspected. Any nicks in the top rim and its going down the guy's gullet.

------------------
Southpa
1970 GMC 1500 Custom
Victoria, BC, Canada

[This message has been edited by Southpa (edited March 23, 2002).]

03-23-2002, 07:09 PM	#1
Southpa Registered User Join Date: May 2000 Location: Victoria, BC, Canada Posts: 2,410	Outlet fittings for 3/4 ton Master cyl... Are they the same size as those of the 1/2 ton master cyl? I'm thinking about getting rid of this leaky 1/2 ton master w/ the single hold-down clip for a 3/4 ton master (2 hold-downs) seeing as how I already have a 3/4 ton booster. And I don't want to have to re-fabricate the lines going to the prop. valve. Going to buy NEW this time and it will be closely inspected. Any nicks in the top rim and its going down the guy's gullet. ------------------ Southpa 1970 GMC 1500 Custom Victoria, BC, Canada [This message has been edited by Southpa (edited March 23, 2002).] __________________ 1970 GMC 1500 Custom Original 350/TH350 Victoria, BC, Canada You can wish in one hand and crap in the other. See which one gets filled first.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.