The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-21-2007, 01:48 PM   #1
1968SWBBigBlock
Active Member
 
1968SWBBigBlock's Avatar
 
Join Date: Oct 2006
Location: Ohio
Posts: 1,643
15 Trucks and Tons of Parts FOR SALE

http://s162.photobucket.com/albums/t...72chevytrucks/
67-72 Chevy Truck Parts & Complete Trucks once in a lifetime

Up for sale today we have an entire warehouse full of trucks & Parts.
We have a selection of parts that have been pulled off of trucks since 1970.
Tons of the good stuff and tons of the small parts that are not made and tons driver/rough quality material.
Reserve is set at a conservative estimate of what the complete trucks would sell for on the open market. The balance of the parts could all be gravy. Again this is a conservative reserve.
Trucks and parts can be viewed by appointment only. They are located in a secure guarded location. Walk thrus are encouraged; we want you to understand what your money will be buying. This is truly a once in a lifetime opportunity for the hottest truck on the market.
I will start with the trucks and rolling chassis and finish off with estimates on the parts.
Pictures are attached; more can be taken as needed. Please ask your questions early and make your appointment for a personal walk thru

1. 1970 Longhorn Factory big block truck, motor is out and needs rebuilt, Montana truck, very solid, tool box door in good shape, Air Conditioning, Automatic T400 transmission, Big Block
2. 1968, 37,000 miles, ¾ Ton custom Camper, original bed has been off for many years since this had a camper on the chassis, very nice bed, surface rust other wise very nice, great cab
3. 68 LWB ¾ ton 327 automatic, engine is out of the truck, Oregon and North Carolina truck, never in salt, exceptional
4. 1968 1 ton flat bed, Okalahoma truck, 67,000 miles 327 4 speed aftermarket air, used to service horses, great body
5. 1971 Chevy ½ ton long bed, California truck with California emissions still in place, 6 Cyl, 3 speed, original bed was stolen, replacement Wyoming bed
6. 1968 Chevy ½ ton long bed, unfinished project, great un-restored bed and parts, engine is out, minor cab rust, owner had a heart attack and could not finish this nice truck
7. 1972 Chevy ½ tom long bed, unfinished restoration, great cab and front clip, new 350 & Turbo 350 transmission, no bed
8. 1972 Chevy ½ ton Short bed, cab needs one rocker, North Carolina truck
9. 1968 Chevy long bed with nice flatbed, 400 small block with turbo 350, automatic, power steering, North Carolina truck with some rust, drives good
10. 1970 Chevy long bed, 350, 3 speed, shifts perfect, low mileage truck, some rust
11. 1972 Short bed with Cheyenne package complete, rusty low mileage truck but it is totally complete and restorable
12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side
13. 1968 short bed ½ ton frame from North Carolina
14. 1972 Chevy 1 ton rolling chassis in good shape
15. 1967 Chevy 1 ton rolling chassis with 2 cyl dump bed & pto (maybe sold)

Now for the parts, this is a partial listing and is expected to be near accurate. It would take us weeks to count all of the parts in this place.

Dash’s – 20+ including several tach dash’s, 67-68 tach dash’s, speed warning dash, and lots of gauge dash’s
Blazer top - 1
Step side bed sides
Front clips – 12+
Doors – 20+
Gas Tanks – blazer & pickup 12+
Tailgates - 13+
Heater Cores -6+
Radiators- 18+
Fan shrouds – 7+
Air conditioning boxes – 7+
2 Pallets full of small block heads including Camel Hump Heads
Bumpers – 30+ Chrome and Painted
Glove box doors – 15+
Hub Caps
Trim Rings
Transmissions – T400, T350, 3 speed, 4 Speed
Trailing arms – 30 sets
16+ Rearends – ½ ton, ¾ ton,1 ton, posi and open
Hoods – 7 +
Roofs – 3
30+ Drive shafts
Carrier Bearings
P/S boxes and pumps – 10+
Air Cleaners
Clutches
Pressure Plates
Flywheels
Flex plates
Radios
Pallet full of body trim
7 grills including one NOS 1970 grill
Small block and big block motors
Intake manifolds
Exhaust Manifolds
Steering columns including tilt, automatic and stick combinations
Black Center Console
Bell housings
Power brake set ups – 10+
Cross members for all transmissions 12+
Torque Converters – 10+
Wiring harnesses
Windshield cowls – 8+
Head liners – 6+
Rally wheels
Nuts, bolts and Misc items

I have done my best to describe all of these parts and trucks as best we can, I am sure you will find several treasures that have long since been forgotten.
These parts have been since 1970. The man that owns this material is forming a new business and needs his warehouse back.
If you have an interest he also has for additional money beyond the closing price of the auction, 65 Chevy fleet side bed sides and tailgate very nice, 55 Tbird deck lid and doors, a ton of S10 parts and several parts trucks, and several Cadillac’s.

Buyer is responsible for removing all of the material in a timely manner – this is open to discussion for your sake and ours. Payment must be made via bank certified check, or cash. We are more than willing to work with any serious buyer. The building is equipped with a freight elevator to help in moving things to the first floor.

We are asking $37,000.00 for the entire lot.
Bill Boyd
509 Raccoon Lane
Sunbury Ohio 43074
wjnboyd@msn.com
740-965-5251- Home
Attached Images
     
__________________
1968 SWB
454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts
781 heads Ported with 2.19/1.88 SSTvalves
Lunati 60204 cam, Micro Trol lifters,
Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition
Holley 770 Street Avenger carb,Headers armor coated
Built by Watson Ruppel Performance in Sarahsville Ohio.
Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall
12 Bolt Eaton Posi 4.10 Richmond Gears moser axles
18.5" x 31" Hoosier Pro Street Radials
ET Classic 5 Wheels - polished
Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone)
Custom Paint & Body Work

Special thanks to my wife, my son and my money tree
1968SWBBigBlock is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com