Historical/This I know/60-66 Model Changes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 07-01-2009, 07:46 AM

Would it be possible to start a Historical/ This I know section.
Example: Historical:
The 60-66 Chevrolet/GMC were designed by John Delorean based on Airplane Design. Thus the nickname Aerotrucks.

Example: Historical:
Dinsmore was the Company that supplied GM with Compasses. Dinsmore the company no longer exists.

This I Know:
The heater resistor in a 62 Chev Truck is the similar to the heater resistor in a 75. You just have to file the 75 to recreate two notches at each end of the resistor.

Historical: The standard mirror arm of the 1960 Chev/GMC were cast. 61-66 were of a bent tube design.

Then we would ask of other members to verify the entries.

07-01-2009, 07:46 AM	#11
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Historical/ This I know Would it be possible to start a Historical/ This I know section. Example: Historical: The 60-66 Chevrolet/GMC were designed by John Delorean based on Airplane Design. Thus the nickname Aerotrucks. Example: Historical: Dinsmore was the Company that supplied GM with Compasses. Dinsmore the company no longer exists. This I Know: The heater resistor in a 62 Chev Truck is the similar to the heater resistor in a 75. You just have to file the 75 to recreate two notches at each end of the resistor. Historical: The standard mirror arm of the 1960 Chev/GMC were cast. 61-66 were of a bent tube design. Then we would ask of other members to verify the entries. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.