ID Clifford 6=8 intake manifold

[bubba327]

Hey guys here it is-- A Clifford six cylinder intake for your 194 230 250 292 Inline six
Model C-4501 (non heated) intake to install a single 4 barrel on your inline 6
I went looking for one and ended up with two, so I will pass this on along to somebody else
Threads are all good, no cracks or breaks, but PO has done a little light grinding on the lower side on the edge (probably to clear the steering shaft in a super six sprint car)
Still very thick at that spot and should not be a issue. (See bottom picture)
It will need a adapter plate to what ever carburetor you are using and these can be made or purchased from Clifford.
Runners are clean and appears to have had very light use.
First $150 plus shipping takes it. Weight is roughly 7.8 lbs unboxed on a bathroom scale
My zip is 83669 so you can calculate approximate shipping charges.

I know you have been really good this year so buy yourself a early Christmas present!