|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
03-24-2011, 03:05 PM
|
#1 |
|
Registered User
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
|
Over head consloe help
Looking for some help on a overhead console for a 1999 blazer.
The directional part is not working now. It worked up until last week. I did not do any thing to the blazer that would cause this. Everthing else works but the directional part just shows something like the letter C, ONLY IN THE DIGETAL FORM if you know what I mean. Also, I was thinking about putting something like this in my project. Question? wher are the sensors located at? I know that the newer ones are computerized today. I'd be ok with just the temp and directional part. Naw! I'll take it all. 
__________________
Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. Last edited by Big Blue; 03-24-2011 at 03:06 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode