The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-04-2012, 03:07 AM   #1
Old Yeller 1970
DON'T TREAD ON ME
 
Old Yeller 1970's Avatar
 
Join Date: May 2005
Location: Crosby County, TX
Posts: 989
Broke something in the rear end

I'm guessing it's ring and pinion. The other day when I started to drive Old Yeller the Auburn limited slip started locking up and strange sounds could be heard coming from the rear end. I immediately parked the truck.

Today I pulled the oil fill plug on the rear diff and checked the oil level. It was close to full. Then I took the trany out of gear (posi still locks the axle down when trany is in gear) and rotated the tires and that's when I could hear the clunking. It was noisiest on the right so I pulled the tire off and can push/pull the axle in and out about 3/4 to 1". I didn't have time to pull the rear diff cover.

I suppose it could be the posi unit but given the cost I'm hoping this simply a broken ring and pinion.

Too many hard launches.
__________________
Old Yeller
Old Yeller 1970 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com