Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-17-2013, 08:09 PM | #11 |
Registered User
Join Date: Feb 2012
Location: Pulaski, Wi
Posts: 491
|
Re: project: 3/4 ton dropped
in the back I ended up just removing the stock u-bolts, and just put the rear axle on top of the springs. then I bought the weld on axle perches from http://www.performanceonline.com/196...-PAIR-RAS6787/ and welded them to the axle. my truck was from Nevada so I used my original u-bolts. everything worked out good, but you have to make sure you keep the axle the exact same angle as before. otherwise it will vibrate like crazy. if you don't like welding or don't have one, I recommend these clamp on perches. http://www.summitracing.com/parts/aaf-all56127
for shocks I didn't get any yet but don't think it will be a problem finding some.
__________________
1979 GMC 3/4 ton camper special 454 (7/8in drop) UPDATE: CADDILAC 500 SWAP AND 4X4 SWAP http://67-72chevytrucks.com/vboard/s...d.php?t=518625 1965 gmc 4x4 build : http://67-72chevytrucks.com/vboard/s...d.php?t=724972 |
Bookmarks |
|
|