The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-30-2013, 02:00 AM   #1
Arekusu
Registered User
 
Arekusu's Avatar
 
Join Date: Mar 2008
Location: Tacoma, Wa
Posts: 334
Weights of truck parts (some 1964 specific)

Well I'm finishing up my build and decided to weigh stuff for others to reference. Maybe it'll help someone with it being in the interwebs now. Feel free to add weights of post your variations so we can calculate a delta. Used a digital bathroom scale. Here's the list. Weights are in pounds. "PC" = powder coated

Porter Built L trailing arm "PC" - 18.7
Porter Built R trailing arm "PC" - 19.3
Porter Built trailing arm lower tie / lateral connector "PC" - 5.8
Porter Built Trailing arm cross member with adj. brackets "PC" - 22.4
Porter Built coil over upper mount cross member "PC" - 5.8
Porter Built front sway bar "PC" - 22.6
Porter Built panhard bar with frame mount "PC" - 7.5
Porter Built Front upper control arms "PC" (bare, no bolts, bushings, etc.) - 4 ea.
Porter Built Front lower control arms "PC" (bare, no bolts, bushings, etc.) - 15.6 ea

Stock trailing arm with bushings and bolt - 24.2 ea
Stock trailing arm cross member - 24.4

Moroso front springs - 15.8 ea
292 I6 stock front springs - 11.3 ea.
Rear Spring 4" drop - 8.7 ea.
Front Spindles "PC" (bare) - 23.8 ea.
Front 5x5 rotor w/ lug nuts, bearings, dust cap - 27.9 ea.
Front Caliper from 5x5 set up with pads and mounting bolts - 12.6 ea.
Inner and Outer tie rods with connection sleeve - 3.8
3/4 ton 1985 C-10 sway bar with bushings - 22

Inner fenders "PC" - 16.6 ea.
Front right fender, primed, painted, 2 coats clear with rubber under coating on inside - 12.1

Front left fender, primed, painted, 2 coats clear with rubber under coating on inside - 12.4

Rear right stepside fender. primed, painted, 2 coats clear, rubber undercoating inside of fender - 27.5

Rear left stepside fender. primed, painted, 2 coats clear, rubber undercoating inside of fender - 23.7

Drivers "step" with "L" bracket attached, fully painted w/ undercoating - 8.2
Pass. "step" with "L" bracket attached, fully painted w/ undercoating - 8.2

Cowl cover / windshield wiper linkage cover - 3.9

Master Cylinder and Booster (no fluid) - 12.6
CCP transmission brace - 6.1

Stock from 64 front glass - 23.1
Stock from 64 small rear glass - 7.1

Arekusu is offline   Reply With Quote
 

Bookmarks

Tags
part weights, porterbuilt, weight


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:49 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com