Project NiteMare-1970 C10 LWB build

[Molberg]

Manual release cable. Used a kink free pto cable.. fished through fender and drilled into lower door with a grommet. I split the operator rod, and slipped on the sleeve piece I made from 1/4" steel tubing. (slides on rod nicely) Welded rod back together with a stop washer for the cable slide assembly to act against when operated. A return spring keeps the manual operator closed. The inside handle operates as normal.. it slides inside the tubing without moving the cable. When the cable is operated, it hits the stop washer and pulls the rod like I'm opening it with the inside handle. (cable not pulled in any of the pics)