91 S10 mild kustom build

[MattLance13]

Hello everyone. i recently ran across this forum and figured id join. I have a S10 for my daily, and i also have a 64 short bed big window project(not pic ready) and a 47 ford(chevy powered) but here is the S10 how i got it.



wasnt bad when i got it, only one i could find in my budget with a untorn seat. ran fine, but desperatly needed a tune up. for a grand it was perfect, cuz i couldnt really work on it right away with two broken hands, but i had my GF help me take care of the mechanical things, and then knock out the shady rear suspension with dropped springs, blocks, and air shocks replacing the previous owners 3 and 2 inch blocks stacked ontop of each other... i still need to redo front suspension with dropped spindles, and dropped springs, and i will dehump the lower A arms while its all apart(have all the parts already) also sanded the primer down from the top body line down just to change things up, and got some Cragers for it.



since that ive switched the 2" blocks for 3" and added a second generation blazer rear sway bar.

Got crazy with the sander while i had it out for prepping a customers tank, and then decided to stripe it.

Then remounted the roll pan, and shaved the tailgate handle.

and that was what i left it like while i went out with the Navy for RIMPAC 2014. I hope to pick up on this when i get back in AUG.
Heres the 47 i mentioned earlier.


... and its build thread:
http://www.jalopyjournal.com/forum/t...thread.817884/