K30 wont steer left after lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ralphieboy · 04-10-2015, 12:02 PM

A little back ground info. Truck is a 84 K30 with Dana 60, 5" of lift using 4" Tuff Country HD springs and 1" zero rate. Per ORDs advice I went with there drop pitman arm instead of steering block. (And I know crossover is best, just not in the budget right now.)

Now the truck turns great to the right, but barely turns at all to the left. I have adjust the drag link both ways, and cannot correct for this. Almost like I got the pitman arm on in wrong place but arent they keyed to go on only one way?

Pulling my hair out here, any advice?

04-10-2015, 12:02 PM	#1
Ralphieboy Registered User Join Date: Nov 2014 Location: Asheville, NC Posts: 6	K30 wont steer left after lift A little back ground info. Truck is a 84 K30 with Dana 60, 5" of lift using 4" Tuff Country HD springs and 1" zero rate. Per ORDs advice I went with there drop pitman arm instead of steering block. (And I know crossover is best, just not in the budget right now.) Now the truck turns great to the right, but barely turns at all to the left. I have adjust the drag link both ways, and cannot correct for this. Almost like I got the pitman arm on in wrong place but arent they keyed to go on only one way? Pulling my hair out here, any advice? Last edited by Ralphieboy; 04-10-2015 at 12:10 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.