SBC with Long W/P.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Possmguts · 12-12-2015, 08:16 PM

Hey guys, Im running a 96 350 with the long W/P.
Bought a new HO polished aluminum pump and this one has a longer nose.. its not gonna allow for belt alignment without changing some other stuff. Will have to space out the PS pump and I havnt bought Alt or brackets yet so..

Also going to have to grind a wee bit around the inside edge thats against the timing cover on the left side as it wont allow the pump to go tight to the block.

Was just wondering if anyone else is running the Weiland 9240p pump, and if so what have you done to get everything lined up and fit right?

12-12-2015, 08:16 PM	#1
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	SBC with Long W/P.... Hey guys, Im running a 96 350 with the long W/P. Bought a new HO polished aluminum pump and this one has a longer nose.. its not gonna allow for belt alignment without changing some other stuff. Will have to space out the PS pump and I havnt bought Alt or brackets yet so.. Also going to have to grind a wee bit around the inside edge thats against the timing cover on the left side as it wont allow the pump to go tight to the block. Was just wondering if anyone else is running the Weiland 9240p pump, and if so what have you done to get everything lined up and fit right? Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8 Last edited by Possmguts; 12-12-2015 at 08:33 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.